1/89
Comprehensive vocabulary flashcards covering the structure, design, aerodynamics, certification, subcomponents, composite construction, and instrumentation of aircraft based on Chapter 3.
Aircraft
A device that is used, or intended to be used, for flight, according to Title 14 of the Code of Federal Regulations (14 CFR) part 1, Definitions and Abbreviations.
Airplane
An engine-driven, fixed-wing aircraft that is supported in flight by the dynamic reaction of air against its wings, as defined in 14 CFR part 1.
Categories of Aircraft for Certification of Airmen
Aircraft categories specified in 14 CFR part 1 for airman certification, which include airplane, rotorcraft, glider, lighter-than-air, powered-lift, powered parachute, and weight-shift control aircraft.
Advanced Avionics Aircraft
An aircraft that contains a global positioning system (GPS) navigation system with a moving map display in conjunction with another system, such as an autopilot (a term not yet codified in 14 CFR part 1).
Airworthiness Standards
Specific regulatory standards published by the FAA under Title 14 of the Code of Federal Regulations (14 CFR) developed to ensure aviation products are designed with no unsafe features.
14 CFR Part 23
The FAA airworthiness standards governing normal, utility, acrobatic, and commuter category airplanes.
14 CFR Part 25
The FAA airworthiness standards governing transport category airplanes.
14 CFR Part 27
The FAA airworthiness standards governing normal category rotorcraft.
14 CFR Part 29
The FAA airworthiness standards governing transport category rotorcraft.
14 CFR Part 31
The FAA airworthiness standards governing manned free balloons.
14 CFR Part 33
The FAA airworthiness standards governing aircraft engines.
14 CFR Part 35
The FAA airworthiness standards governing aircraft propellers.
Special Classes of Aircraft
Aircraft such as gliders and powered-lift that do not have their own individual 14 CFR parts, instead utilizing an agreed-upon combination of standards from 14 CFR parts 23, 25, 27, and 29.
Type Certificate (TC)
An official certificate issued by the FAA when a product (aircraft, aircraft engine, or propeller) complies with the applicable airworthiness standards.
Type Certificate Data Sheet (TCDS)
An FAA document generated when a Type Certificate is issued that specifies the critical design and operational characteristics and limitations of an aircraft, aircraft engine, or propeller.
Light Sport Aircraft (LSA) Certification
A certification process in which aircraft are not designed to FAA airworthiness standards, but rather to an industry consensus of standards, with a Type Certificate issued to the aircraft as a whole (including airframe, engine, and propeller).
Conformity Inspection
An inspection conducted during the manufacturing process to ensure that each part has been built exactly according to the approved design drawings.
Airworthiness Certificate
An FAA-issued certificate indicating that a complete aircraft meets design and manufacturing standards and is in a condition for safe flight; it must be carried aboard during all flight operations.
Standard Airworthiness Certificate
A white certificate issued for normal, utility, acrobatic, commuter, or transport category aircraft, manned free balloons, and aircraft designated as Special Class.
Special Airworthiness Certificate
A pink certificate issued for primary, restricted, and limited category aircraft, light sport aircraft, provisional certificates, special flight permits (ferry permits), and experimental aircraft.
Thrust
The forward aerodynamic force produced by the powerplant/propeller that opposes or overcomes drag, generally acting parallel to the longitudinal axis.
Drag
A rearward, retarding aerodynamic force caused by disruption of airflow by the wing, fuselage, and other protruding objects, acting rearward parallel to the relative wind.
Weight
The downward aerodynamic force caused by gravity acting upon the combined load of the aircraft, crew, fuel, and cargo, acting vertically downward through the center of gravity (CG).
Lift
The upward aerodynamic force produced by the dynamic effect of air acting on the wing, opposing weight and acting perpendicular to the flight path through the center of lift (CL).

Aircraft Axes of Motion
The three axes intersecting at the aircraft's center of gravity (CG): the lateral axis (controlling pitch), the longitudinal axis (controlling roll), and the vertical axis (controlling yaw).
Longitudinal Axis
The roll axis of an aircraft that extends from the nose to the tail, passing through the center of gravity (CG).
Lateral Axis
The pitch axis of an aircraft that extends across the aircraft from wingtip to wingtip, passing through the center of gravity (CG).
Vertical Axis
The yaw axis of an aircraft that passes vertically through the aircraft, intersecting the center of gravity (CG).
Center of Gravity (CG)
The specific point where the mass or weight of an aircraft is concentrated, around which the aircraft would balance if suspended, and which governs flight stability.
Aft Center of Gravity Condition
A hazardous condition where the center of gravity is too far rearward, resulting in dynamic instability and potentially insufficient elevator nose-down force at low stall airspeeds to recover from a stall.
Forward Center of Gravity Condition
A flight condition occurring when the CG is located too far forward, resulting in excessive stability and insufficient elevator nose-up force to flare the airplane for landing.
Fuselage
The central body of an airplane designed to accommodate the crew, passengers, and cargo, while providing structural connection points for the wings and empennage.

Truss Fuselage Structure
A fuselage design method using welded lengths of steel, aluminum, or wood tubing called longerons, braced by vertical and horizontal struts, and shaped with formers and stringers.
Longerons
Principal longitudinal structural members of a truss or semimonocoque fuselage that carry primary bending loads.
Bulkhead (Former)
A transverse structural partition or frame that gives cross-sectional shape to the fuselage and supports stringers and the aircraft skin.
Monocoque Fuselage
A stressed-skin aircraft construction method in which the external skin carries almost all flight and structural loads with minimal internal framework, offering high end-strength but low tolerance to surface deformation.
Semimonocoque Fuselage
A fuselage construction method utilizing an internal substructure of bulkheads, formers, and stringers to reinforce the stressed skin by absorbing bending stresses.

Monocoque and Semimonocoque Construction
The two primary types of stressed-skin fuselage construction: monocoque, which relies entirely on its skin and formers, and semimonocoque, which reinforces the skin with longitudinal stringers.
Firewall
A fireproof partition made of heat-resistant material, such as stainless steel, installed between the engine compartment and the cabin to protect occupants from engine fires.
Wings
Airfoils attached to either side of the fuselage that serve as the main lifting surfaces supporting an airplane in flight.
Monoplane
An airplane configured with a single set of lifting wings.
Biplane
An airplane configured with two sets of lifting wings, usually mounted one above the other.
Semi-Cantilever Wing
A wing configuration that utilizes external wing struts, typically attached halfway out along the span, to transfer flight and landing loads directly to the fuselage.
Full Cantilever Wing
A wing structure designed to carry all aerodynamic and landing loads internally without any external bracing or struts.

Internal Wing Structure
The structural layout of a wing, comprising main load-bearing spars, contour-defining ribs, reinforcing stringers, skin, fuel tanks, and trailing-edge control surfaces.
Wing Spar
The main structural member of the wing running spanwise, designed to absorb and carry the primary bending and aerodynamic loads.
Wing Rib
A structural wing component that gives the wing its specific airfoil camber, thickness, and shape while transmitting loads from the skin to the spars.
Ailerons
Primary flight control surfaces located on the outer trailing edge of each wing that move in opposite directions to generate aerodynamic forces that roll the airplane.
Wing Flaps
Secondary control surfaces extending outward from the fuselage to near the midpoint of each wing that move downward simultaneously to increase wing lift and camber for takeoffs and landings.

Types of Flaps
Airfoil trailing-edge devices classified by geometry: plain flap, split flap, slotted flap, Fowler flap, and slotted Fowler flap.
Plain Flap
A basic flap design where the trailing edge of the wing airfoil rotates downward on a simple hinge.
Split Flap
A flap configuration where only the lower surface of the trailing edge deflects downward, while the upper surface remains flush with the wing.
Slotted Flap
A flap that opens a duct or gap between the wing and the flap when deployed, allowing high-pressure air from beneath the wing to energize the boundary layer over the upper surface.
Fowler Flap
A flap mounted on tracks that extends rearward as well as downward, increasing both total wing surface area and camber.
Slotted Fowler Flap
An advanced flap mechanism that travels aft and downward on tracks while opening aerodynamic slots to prevent boundary layer separation at high lift coefficients.

Weight-Shift Control Aircraft
An aircraft featuring a highly swept, flexible wing that provides controlled flight through the physical shifting of weight to alter the aircraft's center of gravity.

Empennage Components
The entire tail group of an aircraft, consisting of fixed stabilizers (horizontal and vertical) and movable surfaces (elevator, rudder, and trim tabs).
Rudder
A movable primary flight control surface attached to the trailing edge of the vertical stabilizer that moves the airplane's nose left and right (yaw).
Elevator
A movable primary flight control surface attached to the trailing edge of the horizontal stabilizer that moves the airplane's nose up and down (pitch).
Trim Tabs
Small, adjustable surfaces on the trailing edge of primary control surfaces (ailerons, rudder, or elevator) controlled from the flight deck to relieve control pressures.

Stabilator Components
An empennage configuration featuring a one-piece horizontal stabilizer pivoting about a central point, fitted with an antiservo tab across its trailing edge.
Stabilator
A one-piece horizontal stabilizer that pivots from a central hinge point, performing the functions of both a horizontal stabilizer and an elevator when actuated by the control wheel.
Antiservo Tab
A tab extending across the trailing edge of a stabilator that moves in the same direction as the stabilator's trailing edge to decrease sensitivity and act as a trim tab.

Types of Landing Gear
The operational gear supporting an airplane when on the surface, including floats for water, skis for snow, and wheeled arrangements.
Conventional Landing Gear
A landing gear configuration featuring two main forward wheels and a third smaller wheel mounted at the tail (tailwheel).
Tricycle Landing Gear
A landing gear configuration featuring two main wheels situated aft of the CG and a third steerable wheel positioned on the nose.
Powerplant
The complete aircraft propulsion system, normally comprising both the engine and the propeller, which provides thrust and auxiliary power.

Engine Compartment Components
The powerplant assembly consisting of the engine, propeller, and cowling or nacelle housing.
Cowling (Nacelle)
A streamlined covered housing surrounding an aircraft engine that smooths airflow and ducts air around the cylinders to facilitate cooling.
Propeller
A rotating airfoil mounted on an engine that translates rotational force into forward thrust by generating low pressure at the face and high pressure at the back.
Propeller Angle of Attack (AOA)
The angle at which the relative wind meets the propeller blade; the blade is twisted along its span to keep this angle relatively constant from hub to tip.
Propeller Pitch
The theoretical distance a propeller would advance forward in one complete revolution if turning through a solid medium.
Airframe
The basic structural framework of an aircraft designed to withstand all aerodynamic forces and payload stresses.
Aircraft Electrical System
An onboard system that generates, regulates, and distributes electrical power from engine-driven AC generators, auxiliary power units (APUs), or external power.
Aircraft Brakes
A hydraulic braking system featuring caliper pads that squeeze against a rotating steel or carbon rotor disk mounted inside the wheel, with life measured in landings rather than miles.
Composite Construction
The fabrication of aircraft structures using fiber-reinforced matrix systems, such as fiberglass, carbon fiber, or Kevlar™ cloth held together by a cured resin.
Matrix
The resin or 'glue' system in a composite structure (most commonly epoxy resin) that holds the reinforcing fibers together and provides external shape when cured.
Fiberglass
A common composite reinforcing fiber offering good tensile and compressive strength, good impact resistance, and low cost, though heavier than carbon fiber.
Carbon Fiber
A high-performance reinforcing fiber possessing higher tensile and compressive strength and bending stiffness than fiberglass, but susceptible to shattering under sharp impact unless toughened.
Epoxy Resin
A thermosetting plastic matrix commonly used in aircraft composites that is stronger and more heat-tolerant than polyester resin, though many epoxies weaken above 150∘F.
Delamination
A hidden defect or failure in a composite structure where internal layers separate from one another, often expanding in a cone-shaped zone beneath an impact site.

Composite Impact Damage Levels
Structural failure patterns in composites based on impact energy: low energy (hidden internal delaminations and backside fiber fractures), medium energy (local surface crushing), and high energy (full through-penetration).
Composite Lightning Strike Protection
Conductive metal meshes (aluminum on fiberglass, copper on carbon fiber) bonded to the exterior composite skin to dissipate lightning energy across a wide surface area.

Analog vs. Digital Flight Displays
The evolution of cockpit instrumentation from individual analog mechanical gauges to electronic flight displays (EFDs) utilizing LCD screens.
Primary Flight Display (PFD)
An electronic liquid crystal display installed directly in front of the pilot that consolidates primary flight information including airspeed, attitude, altitude, vertical speed, and heading.
Multi-Function Display (MFD)
An electronic display screen positioned in the center of the instrument panel that presents navigation route maps, engine instruments, and systems diagnostic data.
Performance Instruments
The flight instruments that indicate the aircraft's actual performance achieved, consisting of the altimeter, airspeed indicator, vertical speed indicator (VSI), heading indicator, and turn-and-slip indicator.
Control Instruments
The flight deck instruments that display immediate attitude and power changes, specifically the attitude indicator, tachometer, and manifold pressure gauge.
Navigation Instruments
Cockpit instruments that display the position of the aircraft relative to selected ground- or space-based navigational aids, such as GPS, VOR, NDB, and ILS.
Global Positioning System (GPS)
A satellite-based navigation network operated by the Department of Defense requiring at least 3 satellites for a two-dimensional position fix (latitude and longitude) and 4 or more for a three-dimensional fix (latitude, longitude, and altitude).