1/43
Comprehensive fill-in-the-blank flashcards covering Creo Parametric Exam 3 topics: Advanced Modeling Tools (Chapter 9), Assembly Modeling (Chapter 10), Generating Drawing Views (Chapter 11), and Dimensioning Drawing Views (Chapter 12).
The maximum permissible angle for the rotation of sections in a rotational blend is __________.
120 degree
The maximum possible draft angle that can be applied to a solid in Creo Parametric is __________.
89.9 degree
The minimum number of sections required for a blend feature is __________.
two
While using the Sweep tool, the contour of the sweep feature depends on the shape of the __________.
trajectory
While using the Sweep tool, when you draw a section for the sweep feature, the section should be __________ to the endpoints of the trajectories.
normal
When you use the Normal To Trajectory option to create a variable sweep, the section is created normal to the origin trajectory and swept along the __________.
X trajectory
The Swept Blend tool is used to create a model that is a combination of __________ and __________ features.
sweep, blend
The option in the pitch drop-down list used to create a helical feature with uniform spacing between coils throughout the sweep is __________.
Constant
The option in the Swept Blend dashboard used to create a sweep in which the swept section is perpendicular to the trajectory defined as the origin trajectory is __________.
Normal To Trajectory
The first trajectory selected for creating a sweep feature is known as the __________.
origin trajectory
The sketching plane selected becomes __________ to the screen when you draw the trajectory.
parallel
A __________ is required in each section for creating a rotational blend feature to define the axis of revolution.
geometric centerline
You need to have at least __________ sections for creating a rotational blend using the Connect end and start sections option.
three
Each section must have an equal number of __________ for blending.
vertices
In the __________ type of simplified representation, the components removed from the current display are displayed again.
Master
The __________ type of simplified representation reduces regeneration time in large assemblies by loading lightweight facet data.
Graphics
The __________ constraint aligns two planar faces or datum planes parallel while separating them by a specified offset value.
Distance
The __________ constraint is used to assemble circular components coaxially.
Coincident
A tabular representation of all components of an assembly along with the information associated with them is called a __________.
Bill of Materials (BOM)
The __________ constraint is used to align a selected datum point or vertex on the first part with a selected surface or datum plane on the second part.
Put on Srf
When all degrees of freedom of a component are restricted, the message displayed in the Placement Status area is __________.
Completely constrained
The __________ constraint is used to assemble two components by making the selected faces or planes coplanar such that the mating faces face in the same direction.
Align
The Explode View toggle button is located inside the __________ group on the Ribbon.
Model Display
Offset lines illustrating assembly paths can only be created in the __________ state of an assembly.
exploded
The __________ section view is used when you want to show a particular portion of the view in a section while leaving the remaining view unsectioned.
Local
The __________ option allows you to temporarily remove a selected drawing view from the sheet without deleting its definition.
Erase View
The __________ option is used to redisplay drawing views that were temporarily hidden using Erase View.
Resume View
Using the __________ dialog box, you can reorient a general view.
Drawing View
The cross-section hatching on a sectioned portion can be modified using the contextual __________ tab on the Ribbon.
Mod Xhatch
The __________ view is independent of other views and is the first view that is generated in the sheet.
General
The __________ section view cuts completely through the part along a cutting plane and is the most widely used section view.
Full
__________ views are used to display parts that have a high length to width ratio at a readable scale.
Broken
The __________ button in the Orientation group of the View tab adjusts the zoom so that all objects in the drawing area become visible.
Refit
The __________ option displays only the sliced cross-sectional surface itself, hiding background geometry behind the cutting plane.
Area
The __________ option is used to permanently remove a selected drawing view and its dependent child views from the sheet.
Delete
In Creo Parametric Drawing mode, you can reorient only the __________ views.
general
The Orientation area in the New Drawing dialog box is available only when you select the __________ radio button from the Specify Template area.
Empty
The __________ dialog box is used to retrieve and display parametric 3D model dimensions in drawing views.
Show Model Annotations
The __________ dialog box is used to organize scattered or overlapping dimensions into neat, evenly spaced rows.
Clean Dimensions
The Creo Parametric configuration file settings can be opened by choosing __________ from the File menu.
Options
In the Format area of the Dimension Properties dialog box, the Decimal and __________ radio buttons are available.
Fractional
In textbook terminology, the __________ dialog box is used to display model dimensions and geometric tolerances in a drawing view.
Show/Erase
The option in the shortcut menu used to switch a dimension from one orthographic view to another is __________.
Move Item to View
The system will not show a reference datum plane in a drawing view unless the plane is __________ to the drawing area.
perpendicular