1/38
Looks like no tags are added yet.
Controller Command
Power Supply
Actuator
Coupling Mechanism
Controlled System
Actuating Unit in a Mechatronic System
By energy/operating principle
By stable-state output
How are Actuators classified
Binary Actuator
Continuous Actuator
By stabe-state output
Electrical
Electromechanical
Electromagnetic
Hydraulic/pneumatiatic
Smart materials
Micro/nano
Actuators Families
DC Motors
AC Motors
Electromechanical actuators: Motors
Solenoid
Electromagnet
Electromagnetic Actuators
Pneumatic systems
Hydraulic systems
Hydraulic and pneumatic Actuators
Shape memory alloy (SMA)
Piezoelectric (PZT)
Magnetostrictive
Electrorheological fluids
Ion-exchange polymers
Smart materials actuators
Continuous power out put
Range of Motion
Resolution
Accuracy
Peak force/torque
Choosing the right actuator
Dynamic behaviour
Power and coupling
Direct-Drive option
Mechanical effects
Selection also affects the whole mechanism
Actuator
The “muscle” of a mechatronic system; converts a control
command and supplied energy into useful physical action.
Power supply
Provides rated AC or DC voltage and current.
Coupling Mechanism
Interfaces the actuator with the physical system.
Controlled System
The system receiving the actuator's physical output.
Binary Actuator
Has two stable output states; for example, a relay switching
ON/OFF.
Continuous Actuator
Produces output that can be varied or positioned across a range.
Electromechanical Actuator
Converts electrical energy into mechanical motion.
Electeromagnetic Actuator
Uses magnetic force to produce movement or attraction.
Hydraulic actuator
Uses pressurized liquid to produce motion.
Pneumatic actuator
Uses compressed air to produce motion.
Smart-material actuator
Produces actuation through a material response to electrical,
thermal, or magnetic input.
Microactuator
A very small actuator used in microsystems.
DC motor
AC motor
Induction motor
Universal motor
Stepper motor
Motor Type
DC motor
Converts DC electrical energy into rotational motion. Speed can be controlled by varying armature voltage or field current.
AC motor
Uses standard AC power and generally does not require brushes and commutators.
Induction motor
Simple, rugged, and widely used in industry
Synchronous motor
Operates at synchronous speed and can provide high efficiency
Universal motor
Can operate on either AC or DC.
Stepper motor
Moves one step for each input pulse; pulse sequence and rate determine direction and speed.
Solenoid
A current-carrying coil creates a magnetic field; a soft-iron core is pulled or pushed when energized. Commonly used for short-stroke linear motion.
Electromagnet
An energized coil produces magnetic attraction. Used for lifting, holding, switching, and clamping.
Relay
An example of electromagnetic ON/OFF control
Pneumatic system
Uses compressed air; suitable for low-to-medium force, short-stroke, high-speed applications. The presentation notes low maintenance and no electric-shock hazard at the actuator.
Hydraulic system
Uses pressurized oil; can produce very large forces and large motion cost-effectively. More complex and requires more maintenance than pneumatic actuators
Shape memory alloy (SMA)
Thermally induced phase change; nickel–titanium (Nitinol) returns to a programmed shape when heated.
Piezoelectric (PZT)
Applied voltage produces expansion or contraction of a piezocrystal; high bandwidth, small displacement, high resolution.
Magnetostrictive
Magnetic field produces mechanical strain in a material rod; high-frequency, small-motion actuation
Electrorheological (ER) fluids
Fluid behavior depends on the applied electric field; the presentation notes high-voltage excitation and resistance to shock/vibration.
Ion-exchange polymers
Applied voltage causes ionic movement and mechanical deformation; relatively large deformation at low voltage.