1/49
Vocabulary practice flashcards covering fundamental concepts, definitions, interactions, and dosimetry terms from Chapter 1: Radiation Physics.
Nuclide
A species of nucleus characterized by two numbers: its atomic number (Z) and its mass number (A).
Radionuclide
An unstable, radioactive nuclide resulting from an unstable combination of protons and neutrons (such as carbon-14 with 6 protons and 8 neutrons).
Valence shell
The outermost electron shell of an atom (containing no more than eight electrons) that governs the chemical, thermal, optical, and electrical properties of the element.
Electronvolt (eV)
A derived unit of energy equal to the energy acquired by an electron when accelerated through a potential difference of 1V, equal to 1.6×10−19J.
Binding energy (E)
The energy expended in completely removing an electron from an atom against the attractive electrostatic pull of the positive nucleus, expressed in electronvolts (eV).
Ion pair
The pair formed when an atom is ionized, consisting of the detached electron (negative ion) and the remaining remnant atom (positive ion).
Excited atom
An atom in which an electron has absorbed energy and moved from an inner shell to an unoccupied shell further out, giving the atom more energy than normal.
Electromagnetic radiation
Energy travelling across empty space with a velocity (c) close to 3×108m s−1 in vacuo, possessing both wave and particle-like quantum properties.
Photon
A discrete packet or quantum of electromagnetic energy that travels in a straight line.
Photon fluence
The number of photons passing through a cross-section per unit area during a given exposure time.
Energy fluence
The total amount of energy passing through a cross-section per unit area during a given exposure time, calculated by summing the energies of all individual photons.
Beam intensity
The total amount of energy per unit area passing through a cross-section per unit time (energy fluence rate), measured in watts per square millimetre and proportional to the square of wave amplitude.
Thermionic emission
The emission of free electrons from the surface of a metal filament when heated to incandescence (∼2200∘C) by an electric current.
Tube potential (kV)
The high accelerating voltage (typically 30–150kV) applied between the cathode and anode of an X-ray tube to drive electrons toward the target.
Tube current (mA)
The current of electrons (typically 0.5–1000mA) flowing between the filament cathode and target anode across an X-ray tube.
Characteristic radiation
X-rays emitted at discrete photon energies when an incident electron ejects an inner-shell electron and the resulting hole is filled by an outer-shell electron, releasing energy equal to the difference in shell binding energies.
Kα radiation
A characteristic X-ray photon emitted when a vacancy created in the K-shell is filled by an electron transitioning down from the L-shell, with energy equal to EK−EL.
Kβ radiation
A characteristic X-ray photon emitted when a vacancy created in the K-shell is filled by an electron falling in from the M-shell, with energy equal to EK−EM.
Bremsstrahlung
Continuous-spectrum radiation produced when an incoming electron penetrates an atom, is deflected by the nuclear electric field, and decelerates, emitting its lost kinetic energy as an X-ray photon.
Efficiency of X-ray production
The ratio of X-ray output to electrical power supplied, which increases with higher tube kilovoltage (kV) and higher atomic number (Z) of the target material.
Attenuation
The reduction in the number of photons emerging from an absorber compared to the incident beam, resulting from the combination of total absorption and scattering.
Half-value layer (HVL)
The thickness of a specified material required to reduce the intensity of a narrow beam of X-radiation to one-half (50%) of its original value.
Linear attenuation coefficient (μ)
A parameter quantifying the probability that a photon interacts (is absorbed or scattered) per unit path length in a specified material, inversely proportional to the half-value layer (μ=HVL0.693).
Mass attenuation coefficient (ρμ)
The linear attenuation coefficient divided by the material density (ρ), rendering it independent of density and dependent solely on atomic number (Z) and photon energy.
Beam hardening
The increase in the average (effective) energy and penetrating power of a heterogeneous X-ray beam as it traverses matter due to the preferential attenuation of lower-energy photons.
Compton effect
An interaction process wherein an incident photon collides with a loosely bound or free electron, transferring a portion of its kinetic energy to a recoil electron and deflecting with reduced energy.
Electron density
The number of electrons per unit mass of a material, which is proportional to AZ and directly determines the probability of Compton scattering.
Photoelectric effect
An interaction process in which an X- or gamma ray photon collides with a bound inner-shell electron, transferring all of its energy, ejecting the electron, and disappearing completely.
Photoelectron
An electron ejected from an atomic shell via the photoelectric effect, possessing kinetic energy equal to the incident photon energy minus the binding energy of that shell.
Auger electron
A low-energy electron ejected from an atom due to the immediate reabsorption of a characteristic X-ray photon within the same low-Z atom.
Effective atomic number
The weighted average atomic number of a compound or mixture relevant to photoelectric absorption, defined as the cube root of the weighted sum of the cubes of the constituent atomic numbers.
K-absorption edge
A sharp, abrupt increase in the photoelectric attenuation coefficient occurring when the incident photon energy reaches and exceeds the binding energy of the K-shell (EK).
Elastic scatter
An interaction occurring at low photon energies where a photon bounces off a firmly bound electron without any energy loss, ionization, or secondary electron production; also called coherent, classical, unmodified, or Rayleigh scatter.
Secondary electrons
Recoil electrons and photoelectrons liberated in absorbing material by Compton or photoelectric interactions that produce multiple excitations and ionizations along their tracks.
Inherent filtration
The built-in attenuation of the X-ray beam provided by the target, glass tube wall, insulating oil, and housing window, typically equivalent to approximately 1mmAl.
Added filtration
Uniform metal sheets (usually aluminium) interposed between the tube and patient to absorb low-energy photons that contribute to patient dose without improving the radiological image.
Total filtration
The sum of inherent filtration and added filtration, required to be at least 2.5mmAl equivalent for general diagnostic radiology.
K-edge filter
A filter composed of a material with its K-absorption edge positioned within the higher-energy region of the beam spectrum, effectively removing both high- and low-energy photons while transmitting energies just below the edge.
Absorbed dose
The concentration of energy deposited per unit mass of a stated material by ionizing radiation as ionization and excitation, expressed in grays (Gy).
Gray (Gy)
The SI unit of absorbed dose and kerma, defined as one joule of energy deposited or transferred per kilogram of material (1Gy=1J kg−1).
Kerma
An acronym for kinetic energy released to matter, defined as the kinetic energy transferred from uncharged photons to secondary electrons per unit mass of irradiated material at a specified position.
Exposure
An obsolete dosimetric quantity measuring the amount of electrical charge produced by photon ionization per unit mass of air, having SI units of C kg−1 and a historical unit of roentgen (R).
Air-equivalent material
A material matching air in terms of effective atomic number (7.6) so that it absorbs energy from an X-ray beam to the same extent as an identical mass of air regardless of beam energy.
Dose area product (DAP)
The product of radiation dose and beam area measured by a collimator-mounted parallel plate ionization chamber to assess total patient radiation exposure (measured in units such as Gy⋅cm2).
Radiation quality
The penetrating ability of an X-ray beam, determined principally by tube kilovoltage and filtration, and quantified in practice by its half-value layer (HVL) or effective energy.
Luminescence
The process whereby a material absorbs energy from an external radiation source and re-emits that energy in the form of visible light.
Fluorescence
The instantaneous emission of visible light following radiation energy absorption, occurring within a delay time of approximately 10−6s.
Phosphorescence
The delayed emission of light following radiation absorption, commonly referred to as afterglow, with a delay time greater than 10−6s.
Electron trap
An unoccupied energy level created within the forbidden zone of a crystal by impurity atoms that temporarily captures excited electrons until holes become available in the valence band.
Photostimulable luminescence
A luminescent process wherein energy stored in trapped electrons from absorbed ionizing radiation is released as visible light upon exposure to an external light source.