1/226
Looks like no tags are added yet.
Which of the following is NOT a step under the traditional network design approach?
a. An analyst develops cost estimates of the circuits needed to support the network.
b. An analyst takes the traffic on the current network and then multiplies that by a factor of 3.65 to come up with the estimate of the total traffic for the new network.
c. An analyst meets with users to identify user needs.
d. An analyst develops a precise estimate of the amount of data that users will send and receive to estimate the total amount of traffic on each part of the network.
e. An analyst designs the circuits to support the estimated traffic, allowing for modest growth.
b. An analyst takes the traffic on the current network and then multiplies that by a factor of 3.65 to come up with the estimate of the total traffic for the new network.
The traditional network design approach does not work well for _________ networks.
a. slowly evolving
b. rapidly growing
c. static
d. modestly growing
e. not growing
b. rapidly growing
Which of the following is not a current trend that is making the traditional design approach less appropriate for today's networks?
a. The underlying technology of networking devices is changing very rapidly
b. The underlying technology of client and server devices is changing very rapidly
c. The underlying technology of circuits is changing very rapidly
d. Growth in network traffic is very high
e. The most expensive part of any network is the hardware
e. The most expensive part of any network is the hardware
Which of the following is NOT directly contributing to the dramatic increase in network traffic today?
a. Video applications on networks are becoming common.
b. Electronic mail is now used by most people who work in organizations.
c. Web searches are now commonly performed by network users.
d. Much of the video processing on computers can be off-loaded from the CPU onto high-end video cards.
e. Multimedia applications on networks are becoming common.
d. Much of the video processing on computers can be off-loaded from the CPU onto high-end video cards
Which of the following is false about staff costs for a network?
a. The most expensive part of the network today is the staff who design, operate, and maintain it
b. The emphasis is on network designs that reduce staff time needed to operate them
c. Network staff are often required to learn to operate a variety of devices
d. Network staff are often required to maintain a variety of devices
e. When a variety of devices from different vendors are used in a network, it takes less time to perform network management activities.
e. When a variety of devices from different vendors are used in a network, it takes less time to perform network management activities.
The building block design approach is sometimes called:
a. wide and shallow
b. narrow and deep
c. wide and deep
d. narrow and shallow
e. narrow and flat
b. narrow and deep
Nowadays, most organizations use a simpler approach to network design called the ___________ approach.
a. building-block
b. frame definition
c. prototype
d. systems development life cycle
e. guided network
a. building-block
Which of the following is NOT one of the three major steps used in the building-block process to network design?
a. cost assessment
b. technology design
c. implementation and maintenance
d. needs analysis
e. none of the above is a correct answer
c. implementation and maintenance
In the __________ step of the building-block process to network design, the network designer attempts to understand the fundamental current and future network needs of the various users, departments, and applications.
a. technology design
b. needs analysis
c. narrow and deep analysis
d. cost assessment
e. distribution layering
b. needs analysis
In the __________ step of the building-block process to network design, the network designer examines the available technologies and assesses which options will meet the users' needs.
a. technology design
b. needs analysis
c. narrow and deep analysis
d. cost assessment
e. distribution layering
a. technology design
In the __________ step of the building-block process to network design, the network designer considers the relative cost of the technologies.
a. technology design
b. needs analysis
c. narrow and deep analysis
d. cost assessment
e. distribution layering
d. cost assessment
Which of the following is NOT true about network design?
a. In designing LAN networks, network designers tend to err on the side of providing for more capacity than what is currently necessary
b. In designing BN networks, network designers tend to err on the side of providing for more capacity than what is currently necessary
c. In designing WAN networks, network designers tend to err on the side of providing for more capacity than what is currently necessary
d. In designing LAN networks, network designers tend to err on the side of providing for less capacity than what is currently necessary
e. In designing MAN networks, network designers tend to err on the side of providing for less capacity than what is currently necessary
d. In designing LAN networks, network designers tend to err on the side of providing for less capacity than what is currently necessary
In needs analysis:
a. the costs of different physical network design alternatives are assessed
b. the goal is to understand what users and applications the network will support
c. the geographic scope is not an important consideration
d. a baseline of current operations is not important
e. the rate of growth of network traffic is not an issue
b. the goal is to understand what users and applications the network will support
Gaining an understanding of the current application system and messages provides a _________ against which future design requirements can be gauged.
a. backplane
b. baseline
c. turnpike document
d. wish list
e. RFP
b. baseline
The goal of the needs analysis step is to produce a ___________, or a statement of the network elements necessary to meet the needs of the organization.
a. building block
b. access layer
c. core layer
d. cost assessment
e. logical network design
e. logical network design
__________ is NOT an important consideration when network designers review old and new applications.
a. Reviewing the NFL scores
b. Reviewing the organization's possible changes in product mix
c. Understanding the organization's strategic plans
d. Understanding development plans for new uses of electronic commerce
e. Reviewing the organization's business processes
a. Reviewing the NFL scores
Which of the following is NOT an example of identifying protocols that are needed to support hardware and software requirements of applications that will use the network?
a. an application will use HTTP over TCP/IP
b. an application will run on an IBM mainframe and so the network will require SNA traffic
c. an application will need a gateway to translate SNA traffic into TCP/IP protocols
d. an application will use SPX/IPX with a Novell file server
e. an application will have drop down menu choices
e. an application will have drop down menu choices
Which of the following is NOT a way in which network requirements, identified in the needs analysis of the building-block network design process, are organized?
a. unnecessary requirements
b. wish list requirements
c. desirable requirements
d. mandatory requirements
e. none of the above is an appropriate answer
a. unnecessary requirements
Which of the following is NOT included in the key deliverable for the needs assessment stage of the building-block network design process, the set of logical network diagrams?
a. applications of the proposed network
b. servers in the proposed network
c. circuits in the proposed network
d. specific routers that have been chosen to implement the proposed network
e. clients in the proposed network
d. specific routers that have been chosen to implement the proposed network
Which of the following is NOT an example of a building block used in technology design?
a. typical application
b. typical user
c. high traffic application
d. standard network circuit
e. specifications for a particular lighting fixture in the network operating center
e. specifications for a particular lighting fixture in the network operating center
Once the needs have been defined in the logical network design, the next step is to develop a(n) __________.
a. application
b. baseline
c. technology design
d. turnpike design
e. backplane design
c. technology design
Estimating the size and type of the "standard" and "advanced" network circuits is called _________.
a. needs categorization
b. turnpike design
c. cost assessment
d. capacity planning
e. soliciting RFPs
d. capacity planning
Which of the following would NOT be a type of circuit that needs to be considered when planning for technology design CAPACITY?
a. 1000 Mbps
b. Ethernet
c. 10 Mbps
d. 100 Mbps
e. 1 Gbps
b. Ethernet
In the technology design stage of network design,
a. the fundamental technology/protocols to be chosen have no relationship with the circuit capacity
b. the decision for fundamental technology/protocols can be made without considering circuit capacity
c. the decision for circuit capacity can be made without considering fundamental technology/protocols
d. the decisions for fundamental technology/protocols and circuit capacity are interrelated
e. the decision for fundamental technology/protocols and/or circuit capacities is not made at this stage
d. the decisions for fundamental technology/protocols and circuit capacity are interrelated
___________ refers to the amount of data transmitted on a circuit.
a. Circuit loading
b. Leading edge deployment
c. Capacity planning
d. Calculating message volumes
e. Requirements documentation
a. Circuit loading
__________ is an estimate of the highest data volume on a link.
a. Data mode
b. Backplane load
c. Peak circuit traffic
d. Leading edge data flow
e. Circuit transfer
c. Peak circuit traffic
To establish circuit loading, the designer usually starts with the:
a. total characters transmitted per day on each circuit, or, if possible, the number of characters transmitted per two-second intervals if peaks must be met
b. individual user training
c. bus diameter, disk cache that is used at the server station
d. channel bandwidth and baud rate used at each client
e. local, trunk, IXC, DDD, and leased-line circuit bandwidth for each node
a. total characters transmitted per day on each circuit, or, if possible, the number of characters transmitted per two-second intervals if peaks must be met
According to one rule of thumb, ______ percent of circuit loading information is easy to gather.
a. 50
b. 25
c. 80
d. 19
e. 20
c. 80
A _________ results when a network is used to a greater extent than was originally anticipated by the network designer.
a. leading edge data flow
b. circuit load
c. turnpike effect
d. protocol volume
e. capacity plan
c. turnpike effect
There are some network modeling tools that can ________ the existing network.
a. discover
b. disassemble
c. sensitize
d. maintain
e. implement
a. discover
________ is used to model the behavior of the planned communication network once the proposed network map is complete.
a. Implementation
b. Post-implementation review
c. Documentation
d. Simulation
e. Training users
d. Simulation
Which of the following are NOT costs that are generally considered during the cost assessment stage of the building-block network design process?
a. cost of advertising brochures for new products to be offered by an organization
b. internetworking devices cost
c. network management costs
d. circuit costs
e. software costs for network operating system
a. cost of advertising brochures for new products to be offered by an organization
Which of the following is NOT a main item for which network designers estimate costs for the proposed network?
a. software
b. hardware
c. purchasing and installing circuits
d. ergonomic chairs for users
e. circuits provided by common carriers
d. ergonomic chairs for users
To estimate costs for large network purchases, organizations often:
a. purchase all network purchases 'off the shelf'
b. obtain 'book value' information for the existing network from the accounting department
c. ask other companies for an itemized list of their previous year's IT equipment purchases
d. multiply old network costs by a factor of 3
e. issue an RFP to vendors
e. issue an RFP to vendors
RFP stands for:
a. Request for Proposal
b. Ring Fault Path
c. Routing File Protocol
d. Record Facsimile Program
e. Redundant File Protocol
a. Request for Proposal
Estimating the cost of a network is ______ complex than estimating the cost of one new piece of data processing hardware.
a. much more
b. much less
c. about the same
d. exactly the same
e. a little more
a. much more
Which of the following is a way to sell the network proposal to management?
a. talk about upgrades from 10Mbps to 100Mbps
b. give many details about using routers vs. gateways for a particular connection
c. concentrate on a discussion about token ring vs. Ethernet protocol
d. focus on the growth in network use
e. discuss SNA architecture
d. focus on the growth in network use
Which of the following is NOT a key deliverable for the cost assessment step of the building-block network design process?
a. RFP
b. list of wish list requirements
c. revised physical network diagram
d. business case, defined in business objectives and business language, that supports the network design
e. none of the above is an appropriate choice
b. list of wish list requirements
The large network purchases are done:
a. before the vendor(s) are selected
b. before the RFP is sent out
c. after the RFP is sent out, but before the vendor(s) are selected
d. after the vendor(s) are selected
e. after the network has been implemented
d. after the vendor(s) are selected
The network architecture component which enables users to access the network is the
a. LAN
b. building backbone
c. campus backbone
d. enterprise edge
e. WAN
a. LAN
The network architecture component that is sometimes referred to as the distribution layer is the
a. LAN
b. building backbone
c. campus backbone
d. enterprise edge
e. WAN
b. building backbone
The network architecture component which contains the organization's servers is called the
a. LAN
b. building backbone
c. data center
d. enterprise edge
e. WAN
c. data center
The network architecture component that is a special LAN with a group of servers that enables electronic data exchange of between the organization and the external entities it does business with is called the
a. LAN
b. building backbone
c. data center
d. enterprise edge
e. e-commerce edge
e. e-commerce edge
A circuit that is filled almost to its capacity and thus is the critical point that determines whether users get good or bad response times is referred to as a(n)
a. bottleneck
b. building backbone
c. breakneck
d. congested network
e. e-commerce edge
a. bottleneck
A(n) _____________ is NOT a common type of dedicated server.
a. file server
b. print server
c. database serve
d. collision server
e. web server
d. collision server
A(n) ____________ allows many users to share the same set of files on a common, shared disk drive.
a. print server
b. database server
c. file server
d. piconet server
e. remote access server
c. file server
Which of the following is NOT a basic LAN component?
a. Client
b. PAD
c. Server
d. Network interface card
e. Network operating system
b. PAD
Which of the following is NOT an advantage of using Cat5 unshielded twisted pair for cabling LANs?
a. cost (relative to fiber)
b. thickness (relative to coax)
c. weight (relative to coax)
d. flexibility (relative to coax)
e. security (relative to fiber)
e. security (relative to fiber)
Of the following, which is NOT true about fiber optic cable?
a. it is thinner than unshielded twisted pair cable
b. it is lighter than unshielded twisted pair cable
c. it has a very low capacity
d. it is more expensive than CAT5 unshielded twisted pair cable
e. it is a type of guided media
c. it has a very low capacity
Which of the following is NOT a purpose for using hubs in a network?
a. to act as a communications server
b. to connect network cables
c. to prevent attenuation
d. to act as a junction box
e. none of the above
a. to act as a communications server
Which of the following type of media is most commonly used in backbone networks because of its high capacity?
a. fiber
b. infrared frequencies
c. coax cable
d. unshielded twisted pair
e. shielded twisted pair
a. fiber
Hubs:
a. usually incorporate repeaters or amplifiers
b. have connection points called handles
c. limit the distance of a network to a few meters in length
d. are a difficult method to connect network cables
e. operate at the application layer
a. usually incorporate repeaters or amplifiers
_____________ is the software that controls the network.
a. Network Operating System
b. Client Operating System
c. Embedded Operating System
d. Network Control System
e. Network Software System
a. Network Operating System
The server version of the Network Operating System does NOT:
a. provide the software that performs the functions associated with the physical layer
b. provide the software that performs the functions associated with the data link layer
c. provide the software that performs the functions associated with the application layer
d. provide the software that performs the functions associated with the network layer
e. usually provide the software that performs the functions associated with the computer's own operating system
a. provide the software that performs the functions with the physical layer
_____________ provide information about resources on the network that are available to the users, such as shared printers, file servers and application software.
a. Network Services
b. Directory Services
c. Client Services
d. Computing Services
e. Remote Access Services
b. Directory Services
A _________ is a group of centrally organized, related resources.
a. workgroup
b. domain
c. server
d. client
e. sharepoint
b. domain
A hierarchical tree of active directory domains within one organization that is linked to other trees in the organization is called a ___________.
a. ADS
b. Domain
c. Forest
d. Tree
e. NDS
c. Forest
A __________ indicates what resources on each server are available on the network for use by other computers and what people are allowed what access to the network.
a. user profile
b. user access log
c. network profile
d. network operating system
e. server allocation list
c. network profile
The cheapest time to install network cabling is:
a. during the construction of the building
b. as soon as the building is completed
c. as soon as the building is occupied
d. about five years after the building is occupied so that the exact office locations for each network computer is known
e. any time that a network needs to be installed
a. during the construction of the building
Ethernet LAN was developed by:
a. IBM
b. ARPANET
c. DEC, Xerox, and Intel
d. University of Minnesota
e. CERN laboratory in Geneva
c. DEC, Xerox, and Intel
___________ is how the network works conceptually.
a. Physical topology
b. Logical topology
c. Network topology
d. Ethernet
e. Media access control
b. Logical topology
The type of logical topology that hub-based Ethernet uses is a:
a. ring
b. bus
c. star
d. mesh
e. interconnected
b. bus
A logical bus topology:
a. is always used by token ring protocol LANs
b. has all computers connected to each other in point-to-point connections
c. is limited to short distances since devices like a hub or repeater cannot be used with this type of topology
d. permits every message to be received by every computer on the bus, even when those messages are intended for other computers
e. has a central control device, such as a mainframe
d. permits every message to be received by every computer on the bus, even when those messages are intended for other computers
Media access control refers to:
a. the price of fiber optic cable
b. security over floppy disks in a user environment
c. the ability for a user to use multimedia equipment in a LAN
d. controlling access to a media by more than one computer in a LAN
e. the control over coax cable installed by a cable service provider
d. controlling access to a media by more than one computer in a LAN
Which of the following is NOT true about CSMA/CD?
a. The acronym refers to Carrier Sense Multiple Access with Collision Detection
b. It is used in token ring protocol LANs
c. It is a contention-based media access control technique
d. When a collision has occurred, the computers that wish to transmit wait a random amount of time after a colliding message before attempting to retransmit
e. Computers on the circuit 'listen' before transmitting
b. It is used in token ring protocol LANs
_________ is NOT a type of Ethernet specification.
a. 100Base-T
b. 10GbE
c. 1000Base-T (1GbE)
d. 10Base-T
e. Securenet
e. Securenet
100Base-T
a. supports 100 Mbps data rate
b. is inexpensive
c. runs on twisted pair
d. is more dominant than token ring
e. all of the answers are correct
e. all of the answers are correct
100 Base-T:
a. can run at either full- or half-duplex
b. is one of the oldest forms of Ethernet
c. is one of the slowest forms of Ethernet
d. can only be used over coaxial cables
e. has only one version, 100Base-SLCX
a. can run at either full- or half-duplex
________ is a hybrid version of Ethernet that uses either 10Base-T, 100Base-T, or 1000Base-T.
a. Mullion Ethernet
b. Base-T Ethernet
c. 10/100/1000 Ethernet
d. Token ring Ethernet
e. FDDI Ethernet
c. 10/100/1000 Ethernet
Switch based Ethernet:
a. uses a hub to connect computers
b. has a physical topology of a ring
c. has a logical topology of a ring
d. has a logical topology of a bus
e. usually enables all attached circuits to send or receive packets simultaneously
e. usually enables all attached circuits to send or receive packets simultaneously
A switch uses a _____________ that is very similar to a routing table used in a router.
a. cable plan
b. forwarding table
c. network server
d. reversing table
e. switching mullion
b. forwarding table
Which of the following is NOT true about layer-2 switched Ethernet?
a. A switch replaces the hub.
b. The physical topology is the same as the physical topology of shared Ethernet: a ring.
c. The logical topology is a star.
d. The switch uses a forwarding table to switch the frame to the correct circuit/computer.
e. The switch chooses which frame to transmit first if it receives more than one frame destined for the same computer at the same time, and stores the other frame(s) temporarily.
b. The physical topology is the same as the physical topology of shared Ethernet: a ring
Which of the following is NOT true about switched Ethernet?
a. The switch has a physical bus topology
b. It uses a switch instead of a hub.
c. Most switches support full duplex circuits.
d. It essentially provides a point-to-point connection between computers.
e. It has forwarding tables in which entries are learned over time.
a. The switch has a physical bus topology.
Which of the following is a mode in which a switch reads in the first 64 bytes of the Ethernet frame and then begins forwarding out the frame on an outgoing port?
a. fast learning switching
b. routing switching
c. fragment-free switching
d. store switching
e. cut switching
c. fragment-free switching
Each of the full duplex circuits connected to a switch is a separate _______________ circuit connecting the switch to a device on the network.
a. multipoint
b. point-to-point
c. shared
d. ring
e. star
b. point-to-point
Wired Ethernet is becoming a _______________ technology for small SOHO devices, meaning that manufacturers are no longer creating new products.
a. host
b. legacy
c. caching
d. hub
e. peak
b. legacy
Which of the following can provide fault tolerance for the storage space on a server?
a. RAID
b. SCSI
c. IDE
d. USB
e. EIDE
a. RAID
Which of the following is NOT a potential bottleneck for LAN performance?
a. number and speed of hard disks in the server
b. amount of memory in the server
c. speed of server's CPU
d. network interface card
e. all of the answers are potential bottlenecks for LAN performance
e. all of the answers are potential bottlenecks for LAN performance
If your LAN server is overloaded, which of the following should you not consider (to solve the server problem)?
a. adding one or more additional servers
b. upgrading the server's CPU with a faster CPU
c. increasing the amount of memory of the server
d. increasing the number and speed of hard disks in the server
e. replacing the cable with fiber optic cable
e. replacing the cable with fiber optic cable.
To increase the volume of simultaneous messages the LAN circuit can transmit from network clients to the server(s), you can:
a. increase the CPU of the server
b. upgrade to a bigger circuit
c. increase the number of hard disks on the server
d. increase the amount of disk capacity of the server
e. increase the amount of memory of the server
b. upgrade to a bigger circuit
Breaking a network into smaller parts is called network:
a. fragmentation
b. segmentation
c. localization
d. allocation
e. mitigation
b. segmentation
Which of the following is NOT an effective way to reduce LAN network demand:
a. move files to client computers
b. use disk caching on the client machines
c. find an application that places a large demand on the network and run it a time when the network is lightly loaded
d. add hidden nodes
e. shift the users' routines
d. add hidden nodes
Which of the following is NOT a WLAN standard?
a. 802.11ac
b. 802.11a
c. 802.3
d. 802.11b
e. 802.11g
c. 802.3
The IEEE designation for the type of wireless standard that uses both the 2.4 and 5 GHz range is __________.
a. 802.11n
b. 802.11a
c. 802.3
d. 802.11b
e. 802.11g
a. 802.11n
A(n) _____________ is used in a computer to connect it to a WLAN.
a. ethernet NIC
b. antennae
c. wireless NIC
d. access point
e. hub
c. wireless NIC
A(n) ___________ is a radio transceiver that plays the same role as a hub or switch in a wired network and connects the WLAN to the wired network.
a. ethernet NIC
b. antennae
c. wireless NIC
d. access point
e. hub
d. access point
How many channels does the 802.11ac standard provide for communication between the access point and clients?
a. 4
b. 6
c. 8
d. 11
e. 2
c. 8
How can a set of 802.11b access points be configured to operate without interference?
a. assigning each access point a different channel to communicate with clients
b. separate each access point by more than 10 meters
c. assign the same channel to no more than two access points
d. use omnidirectional antennas on some access points and directional on others.
e. none of the above
a. assigning each access point a different channel to communicate with clients
__________ antennas transmit the signal in all directions.
a. directional
b. microware
c. omnidirectional
d. radio
e. vertical
c. omnidirectional
__________ antennas project a signal in only one direction and are most often used on the inside of an exterior wall pointing to the inside of the building for security reasons.
a. directional
b. microware
c. omnidirectional
d. radio
e. vertical
a. directional
CSMA/CA is an acronym for:
a. Carrier Sense Multiple Access with Collision Acknowledgment
b. Carrier Sense Mode Access with Carrier Avoidance
c. Carrier Sense Multiple Access with Collision Avoidance
d. Carrier Sensory Multiple Access without Collision Acknowledgment
e. Carrier Sense Multiple Acknowledgment with Collision Avoidance
c. Carrier Sense Multiple Access with Collision Avoidance
Another name for distributed coordination function (DCF) is __________.
a. distributed carrier sense method
b. physical carrier sense method
c. physical carrier sense mode
d. distributed carrier sense mode
e. distributed coordination mode
b. physical carrier sense method
When a computer transmits at the same time because it cannot sense that another computer on the WLAN is currently transmitting is referred to as the:
a. out of range problem
b. collision problem
c. hidden node problem
d. controlled access problem
e. media access problem
c. hidden node problem
The maximum data rate of an 802.11ad WLAN is
a. 24 Mbps
b. 36 Mbps
c. 11 Mbps
d. 7 Gbps
e. 9 Mbps
d. 7 Gbps
How many channels does 802.11g provide for communication with clients?
a. 20
b. 12
c. 10
d. 3
e. 8
d. 3
The maximum data rate of an 802.11g WLAN is
a. 24 Mbps
b. 36 Mbps
c. 11 Mbps
d. 54 Mbps
e. 9 Mbps
c. 54 Mbps
Which of the following standards is backward compatible with IEEE802.11a, b, and g?
a. 802.11a
b. 802.11b
c. 802.11g
d. 802.11n
e. 802.15
d. 802.11n
Many organizations today are installing traditional wired Ethernet for desktop users and install Wi-Fi as ______________.
a. Overlay networks
b. Bluetooth
c. Cellular networks
d. Mobile networks
e. Ethernet networks
a. Overlay networks
Which of the following is NOT determined by a site survey?
a. feasibility of the desired coverage
b. potential sources of interference
c. the security of the WLAN
d. estimated number of access points needed to provide coverage
e. current locations of the wired network into which the WLAN will connect.
c. the security of the WLAN
_____________ refers to practice of writing symbols in chalk on sidewalks and walls to indicate the presence of an unsecured WLAN.
a. wardriving
b. chalking
c. warchalking
d. marking
e. identifying
c. warchalking