1/31
Looks like no tags are added yet.
soil quality
ability to carry out intended functions
geological erosion
takes place without human influence
human-accelerated erosion
much more prevalent
erosion in semi-arid regions
high rates due to sparse vegetation, few but intense rain events
erosion in humid regions
low rates due to protective effects of vegetation
major sources of erosion in NC
construction, agriculture, streambank/shoreline erosion
3 steps of erosion
detachment, transport, deposition
sand erosion potential
largest particles, requires more energy to move. promotes infiltration, reduces runoff, settles quickly.
clay erosion potential
sticky, creates clumps that act like large particles and require more energy to move. very difficult to settle once in runoff, causes turbidity.
silt erosion potential
not sticky and small enough to be easily moved, most eroded soil particle
sheet erosion
uniform erosion from entire soil surface, particles transported by shallow sheet flow and delivered to rill channels
rill erosion
concentrated water running through little streamlets removes soil, can be repaired by tillage or leveling
gully erosion
deeper channels that can’t be erased by cultivation or leveling, locally destructive
wind erosion
very significant source of erosion
soil-loss tolerance
some erosion can be tolerated without degrading soil quality
T-values
soil loss tolerance limits for different soils where productive capacity can be maintained
factors that affect soil loss from water
rainfall, soil erodibility, topography, surface condition, erosion control practices
quantifying water-transported erosion: RUSLE
annual soil loss per acre = R*K*LS*C*P. rainfall and runoff, soil erodibility, length and slope, cover and vegetation, practices to prevent erosion. sheet and rill erosion only!
factors that affect soil loss from wind
wind velocity and turbulence, surface roughness, soil properties, vegetation
quantifying wind-transported erosion: RWEQ
annual soil loss per acre = f(I*C*K*L*V). function of soil erodibility, climate, soil ridge roughness, field width, vegetative cover.
conservation tillage
no-till, chisel plow, moldboard plow
cover crops
maintain crop residue cover above 30%, use cover crops when residue would be insufficient
contour planting
plant crops along contours of hills, alternate high and low residue strips
terrace farming
controls slope steepness and length
filter strips
permanent vegetation buffer strips that reduce runoff
riparian buffers
trees/shrubs alongside bodies of water to reduce runoff and erosion
swales
grassy ditch used to conduct surface water from high to low elevation, increase infiltration
soil stabilization
vegetation is the most effective erosion control, other methods like hydro-mulching, mats/blankets, mulching used in the interim
turbidity
amount of sediment suspended in water, cloudiness
controlling turbidity - filtration
often impractical and expensive
controlling turbidity - infiltration
ideal but most soils are inadequate
controlling turbidity - chemical treatment
use flocculants (polyacrylamide/PAM) to bind suspended solids into flocs, improving runoff water quality