1/78
Looks like no tags are added yet.
Which of the following positions does not act as a liaison between Radar, Airfield & Weather Systems (RAWS) management levels?
Unit deployment manager (UDM)
Which position is typically a chief master sergeant (CMSgt) position, assigned to Headquarters Air Force (HAF), and is responsible for organizing and managing one or more enlisted career fields?
Air Force career field manager (AFCFM)
Which position serves as the liaison between organizations on their installation and the respective major command functional manager (MFM)?
Base functional manager (BFM)
What is used to assign personnel to units in order to accomplish their mission?
Manpower
A funded position on the unit manpower document (UMD) is called
a manpower authorization
The manpower document reflects what experience level needed to accomplish a required workload?
Minimum essential level
What does the Air Force (AF) consider as the primary indicator of experience and/or effectiveness required for assigning personnel?
Enlisted skill level
Which entity has a role to conduct studies, develop survey instruments, analyze collected data, and provide actionable Air Force specialty code (AFSC) information?
Occupational analysis division (OAD)
What kind of squadron is a component of the Air National Guard (ANG) and trains personnel to deploy and provide air traffic services for worldwide contingencies?
Air traffic control (ATC)
What is the name of the wing that maximizes America's power through the exploitation of timely, accurate, and relevant weather information anytime and everywhere?
557th Weather Wing
Which type of equipment provides the capability to identify, sequence, and separate aircraft, as well as provides final approach guidance and control instructions to aircraft at deployed locations in all types of weather?
Deployable Radar, Airfield & Weather Systems (RAWS)
Which type of equipment does not make up part of a complete deployable air traffic control and landing systems (DATCALS) airfield package?
AN/TPN-26 Airport Surveillance Central
Ground-based elements of which type of equipment provide the joint forces air component commander (JFACC) with means to plan, direct, control and coordinate air operations with ground, naval, and coalition forces?
Ground theater air control system
Which percentage of work center tasks must be reflected in the master training plan (MTP)?
100
What does the work center master task list (MTL) identify?
All day-to-day mission (duty position) requirements
Which Air Force instruction (AFI) governs the Air Force Inspection System (AFIS) self-assessment program?
AFI 90-201, The Air Force Inspection System
A contract index is a list
or spreadsheet that contains all your contracts and important information of each
What is the purpose of a change clause in a contract?
Authorizes the government to make modifications to the contract
Who has management authority and is assigned all system and equipment modification activities for equipment and systems maintained?
Program manager
Which Air Force (AF) form is used to initiate a system and equipment modification proposal?
AF Form 1067, Modification Proposal
System and equipment modification documents are maintained for which length of time?
Throughout the modified assets life cycle
What is the principal automated technical order (TO) management application?
Enhanced Technical Information Management System (ETIMS)
Commercial off-the-shelf (COTS) manuals are used instead of developing new Air Force (AF) technical orders (TO) when
no degradation in system operation, safety, support or reliability will result
Which technical order (TO) dictates Air Force (AF) technical order life cycle management procedures?
00-5-3, AF Technical Order Life Cycle Management
Your primary mission as a 7-skill level technician is to
ensure that your equipment is able to perform as expected
Which equipment status should you assign if your equipment has lost redundant capabilities but is fully capable of supporting all missions?
Amber
Which reporting system would you use to review the open incidents list (OIL) and ensure each job against the work center is current and correct?
Integrated Maintenance Data System (IMDS)
Which reporting system provides the work center with the ability to track equipment inventories, open and close jobs, schedule and document maintenance, and document ancillary training?
Integrated Maintenance Data System (IMDS)
Which organizational area is responsible for external reporting of equipment and personnel status within your unit?
Maintenance work center
In which Air Force instruction (AFI) would you find detailed information about how a work center reviews the open incident list (OIL) to ensure each job is current and correct?
AFI 21-103, Equipment Inventory, Status and Utilization Reporting
Air Force Occupational Safety & Health (AFOSH) guidance must be followed
at all times
Who has the authority to grant exemptions to Occupational Safety and Health Administration (OSHA) standards?
Department of Labor (DOL)
What is the key to preventing injuries at work?
Understanding what the hazards are and how to deal with them
Which of the following is not a factor that determines the severity of electrical shock?
Amount of voltage flowing through the body
Which type of radiation produces heat in body tissues with little or no sensation of skin heating?
Non-ionizing
In which Air Force instruction (AFI) would you find information on safety precautions?
AFI 91-203, Air Force Consolidated Occupational Safety Instruction
Who performs health risk assessments for all electromagnetic field (EMF) transmitters owned and operated by communications facilities?
Bioenvironmental engineering (BE)
Who establishes the electromagnetic field (EMF) safety program when required by Air Force Instruction (AFI) 48-109, Electromagnetic Field Radiation (EMFR) Occupational and Environmental Health Program?
Unit commander
Who is responsible for informing bioenvironmental engineering (BE) and requesting a hazard assessment survey for each new electromagnetic field (EMF) system prior to operations?
Supervisor
What are the most common mishaps resulting in injury and property damage?
Slips and falls
Who is responsible for maintaining good housekeeping in the work area?
Supervisor and workers
Who directs implementation and provides resources for the mishap prevention program within the framework of the Air Force Safety Management System (AFSMS)?
Work center supervisors
Which age group is the pre-departure safety briefing especially targeted?
Under 26
Which form is used to identify and report hazardous conditions?
Air Force (AF) Form 457, USAF Hazard Report
What are the three main functions of grounding?
Personnel safety, equipment protection, and noise reduction
Which system is not a subsystem of the facility ground system?
Fault distribution
Which resistance should an earth electrode subsystem bond not exceed?
1 milliohm (mΩ)
What is the only bond that can be made with soft solder?
Signal reference bond
Although power leaked by a cable may be a very small percentage of transmitted power, it could still cause
significant interference to sensitive circuits
Why is evaluating all conductive paths for the escape of compromising emanations difficult?
There are so many of them
As a result of which process are electrical charges developed?
Friction
Which item is not a source of static electricity?
Grounded work bench
What is the best method for controlling electrostatic discharges (ESD)?
Prevent them from building up
Which electrostatic discharge (ESD) preventive measure can be used without actually making contact with an item?
Ionizing blower
The type of terrain Radar, Airfield & Weather Systems (RAWS) should be sited on is flat
away from obstructions
What is the maximum surface roughness for area "A" of the localizer?
Must not exceed +/-.5 feet
The distance around the localizer that must be free of reflecting objects, such as buildings, power lines, wire-mesh fences, trees, or parked aircraft is a
500-foot radius from the center of the course array
How many feet must vehicular traffic be in front of glideslope equipment?
500
What is the maximum distance in feet between the AN/TPS-75 antenna pallet and the equipment shelter?
21
When siting for the AN/TPN-19, what is the maximum separation distance in miles between the operations and radar shelters?
10
As good practice, what general items should be inspected in Radar, Airfield & Weather Systems (RAWS) facilities and on remote equipment during normally scheduled preventive maintenance inspections (PMI)?
Corrosion, equipment racks, animals and insects, environmental considerations
The action aircrews perform when a navigation system's identification is not received or the identification code is set to "TEST" is
consider the signal unreliable
Where will facility records be kept for equipment maintained by the regional maintenance center (RMC)?
At the RMC
Which flight inspection determines the suitability of a proposed site for the permanent installation of an air navigation facility?
Site evaluation
Which flight inspection is designed to obtain complete information on a facility performance and establishes that the facility supports its operational requirements?
Commissioning
At which intervals before maintaining the established schedule are newly commissioned precision facilities initially inspected?
90, 180, and 270 days
The deployment method the Air Force (AF) has transitioned to is
AEF teaming
Which option is not a main principle that provides the foundation for how the air and space expeditionary force (AEF) is structured and executed?
Vulnerability
What air and space expeditionary force (AEF) principle provides a logically organized structure during periods of surge, supplying near seamless combatant commander support?
Predictability
Which air and space expeditionary force (AEF) principle is the "when, why, and how" visibility for every Airman?
Transparency
Which air and space expeditionary force (AEF) key element is considered low supply/high demand (LS/HD)?
Demand force teams
Which process ensures the systematic deployment, employment, sustainment and redeployment of US forces meet commander requirements across the range of military operations?
Deployment planning
Which type of planning is conducted in the absence of an active crisis in response to scenarios and threats identified by combatant commanders and in national guidance?
Deliberate
Combatant commanders in need of forces to support a requirement will initiate a request for forces or a request for capabilities during which deployment sourcing phase?
Development
What should a joint force provider request when a standard unit type code (UTC) requirement is unobtainable or determined insufficient?
Joint expeditionary tasking
The four areas resource readiness measures and reports across are
personnel, equipment and supplies on hand, equipment condition, and training
A summary of a unit's mission and resources for which it has been organized, designed, or equipped describes a
designed operational capability (DOC) statement
Which unit type code (UTC) management document provides the capability to create and maintain the standard supplies and equipment for each UTC in the Air Force (AF)?
Logistics detail (LOGDET)
The personnel unit type code (UTC) is built to accommodate how many days of sustained manning coverage, with members working six 12-hour shifts per week?
30