1/18
Comprehensive vocabulary flashcards covering electric motor and generator fundamentals, formulas, operational principles, maintenance rules, and industrial nameplate specifications.
Synchronous Motor RPM Formula
The formula used to determine the revolutions per minute of a synchronous motor: RPM=(f×120)÷P, where f is frequency and P is the number of poles.
Torque
The measure of the force that creates a rotation on the axis of a motor.
Induction Motor
An electric motor constructed with a rotor that spins inside a stationary stator.
Rotor and Stator Magnetic Fields
In an induction motor, the magnetic fields follow one another, with the rotor field always trailing behind the stator's magnetic field.
Commutator Cleaning
The maintenance procedure for a dirty commutator, which should be cleaned using very fine sandpaper of approximately 1200 grit.
Generator
A rotating machine that converts mechanical energy into electrical energy.
Motor Power Voltage Types
The four types of voltage utilized to power electric motors: AC single phase, AC three phase, DC single phase, and DC three phase.
Motor Over-lubrication
The practice of applying oil or grease too frequently to a motor, which is just as damaging as waiting too long between applications.
Motor Brushes
Components that conduct the electric current required to make a motor spin; the power cord must always be unplugged prior to servicing or changing them.
Motor Nameplate
An identification plate mounted on a motor containing essential operational data, including its rated voltage and operating frequency.
Squirrel Cage Rotor
A specific rotor design that serves as the core component for an induction motor.
DC Motor Repulsion Principle
The operating concept utilized by many DC motors that relies on unlike poles repelling one another to rotate the armature.
Slip
The difference between the rotating magnetic field of the stator and the speed of the trailing rotor in an induction motor.
Synchronous Speed (2 Pole, 50Hz Motor)
3000RPM, determined via RPM=(50×120)÷2.
Synchronous Speed (4 Pole, 60Hz Motor)
1800RPM, determined via RPM=(60×120)÷4.
Synchronous Speed (6 Pole, 42Hz Motor)
840RPM, determined via RPM=(42×120)÷6.
Baldor Reliance M3665T Bearings
The specific bearing set listed on the nameplate: one drive end bearing (DE 6206) and one opposite drive end bearing (ODE 6205).
Baldor Reliance M3665T Rated Voltage
208–230/460V 3-phase AC power, also usable at 208V drawing 14A.
Baldor Reliance M3665T Pole Count
4 poles, corresponding to a nominal operating speed of 1750RPM at a rated frequency of 60Hz.