1/63
Looks like no tags are added yet.
transportation
movement of passengers and or frieght
hard sciences
pavements, geometric design, vehicle design, and environmental effects
soft sciences
human behaviors, economics, urban planning, political sciences
modes of transportation
highways, rail roads, air transportation, water ways, pipelines
cause of congestion
too many vehicles, lack of management and control, demand>capacity
recurring congestion
caused by routine heavy traffic
nonrecurring congestion
unexpected or unusual congestion caused by unexpected events
energy consumption
gas price changes and use of a lot of energy
equity of access
equal rights to acess transportation (poor, elderly, handicap)
environmental protection
impacts on air quality, noise, wildlife, and water quality
new technology
new devices in electronics, communication, tech, computer
funding
fuel tax main sources of funding for high way
mircroscopic
flow in an aggregate sense, flow speed density relationship (k, q, v)
microscopic
behavior of an individual vehicle in a disaggregate manner (u,h,s)
speed
rate of motion, distance per unit time
spot speed
speed taken at fixed roadside point
space mean speed
average speed of all vehicles occupying a given section of highway over some specified time interval
time mean speed
average speed of all vehicles passing a point or short segment of highway over some specified time interval
volume
actual number of vehicles passing a point during a given time interval
flow rate
number of vehicles passing a point during a time interval less than one hour
ADT
average daily traffic
AADT
annual average daily traffic
DHV
design hourly volume (30th highest hourly volume in a year) also peak hour volume
PHF (Peak hour flow rate)
ratio between total hourly volume to the maximum 15 min flow rate
Density (K)
number of vehicles occupying a given length of lane or roadway averaged over time (vpm)
spacing
distance between two successive vehicles in a traffic stream (front bumper to front bumper)
headway
time difference between two successive vehicles as they pass a point on a roadway
clearance
distance between two successive vehicles in a traffic stream, from back bumper of the lead veh. to front bumper of the follower veh.
gap
time interval between the back bumper of the lead veh. to front bumber of the follower veh. as they pass a point on a roadway
traffic studies
volume study, speed study, travel time study, delay study, density study, other
volume study
directional distribution, lane distribution, vehicle type, turning movement, vehicle occupancy; use counters for counting vehicles
spot speed study
measure speed at specific locations, record speed of individual vehicles
travel time study
amount of time it takes to traverse a section of highway, time vehicle is actually in motion, and difference between actual travel times and travel time under ideal conditions
delay study
time lost by a vehicle due to causes beyond the control of the driver
crash studies
identify crash prone locations
traffic flow models
describe the relationship among traffic variables such as speed, flow, and density
percent occupancy/ lane occupancy
the percent of time a point of short section of freeway is occupied by vehicles
uninterrupted flow
occurs on facilities that do not have elements external to the traffic streams that cause interruptions to traffic flow
interrupted flow
external elements cause interruptions to traffic flow
greenshields model
linear relationship between speed and density
underwood model
corrects problem of infinite ffs in Greenbergs model
northwestern model
observation that speed density curves appear to be s shaped
deterministic queuing
both arrivals and servicing rates are uniform
stochastic queuing
arrival or servicing rate not uniform
M/D/1 Queuing
arrival times are exponentially distributed
M/M/1
arrivals and departures exponentially distributed
capacity
maximum hourly flow rate of vehicles, passengers, or the like, which can be reasonably expected to traverse a point or a section under prevailing roadway, traffic, and control conditions.
level of service
describes the quality of service achieved on a transportation system in terms of speed, freedom of maneuver, traffic interruptions, comfort, convenience, and safety
basic section
section beyond the influence of merging or diverging movements
shoulder slope
2-8%
intersections
2 or more roadways join
key intersection principles
minimize conflicts and provide convenience and ease of movement
alignment (hor. close to right angle; vertical: close to level)
turning radii (based on design vehicle, design speeds important)
sight distance
intersection design issues
lowest capacity, lowest land cost, and lowest structure cost
diamond
high capacity, high land cost, and moderate structure cost
cloverleaf
highest capacity, high land cost, and highest structure cost
directional