1/39
Vocabulary practice cards covering measurement systems, static and dynamic instrument characteristics, sensor types, error propagation, and statistical analysis.
Measurand
The physical variable or input quantity that is being measured by a measuring system.
Primary Sensor
The first element in a measurement system that senses the measurand and produces an output that is a function of that input.
Variable Conversion Element
An element in a measurement system utilized when the output variable of a primary sensor is in an inconvenient form (such as varying resistance) and converts it to a more convenient form (such as voltage).
Transducer
A device formed by the collective combination of a primary sensor and a variable conversion element.
Signal Processing Element
An element, such as an electronic amplifier or a filter, designed to improve the quality of a measurement system output by amplifying weak signals or eliminating induced noise.
Static Characteristics
The set of criteria and parameters defined for measuring instruments when they are used to measure input quantities that remain constant over time.
Accuracy
The degree of closeness with which an instrument reading approaches the true value of the physical quantity being measured.
Point Accuracy
The accuracy of an instrument that is specified strictly at one single point on its scale, providing no information regarding accuracy at any other scale point.
Absolute Accuracy
The deviation of an instrument reading from the true value expressed directly as a numeric value rather than as a percentage.
Span
The numerical difference between an instrument's maximum and minimum measurable values, represented as upper range value minus lower range value (URV−LRV).
Tolerance
A parameter closely related to accuracy that specifies the maximum error to be expected in a manufactured component or value.
Precision
A measure of the degree to which successive measurements of the same quantity differ from one another, representing reproducibility or closeness among repeated readings.
Reproducibility
The ability of a measuring instrument to repeatedly read the exact same signal over time and yield the identical output under identical operating conditions.
Sensitivity
The ratio of change in instrument output to the corresponding change in the measured variable, also referred to as the transfer function.
Drift
The gradual change in an instrument's output reading over a period of time while the measured input variable remains completely unchanged.
Zero Drift (Bias)
A constant measurement error occurring across the entire scale caused when ambient environmental conditions modify the zero reading of an instrument.
Sensitivity Drift (Scale Factor Drift)
The amount by which an instrument's sensitivity of measurement varies as standard ambient conditions change.
Hysteresis
The difference in instrument readings obtained when approaching a particular input value from opposite directions (increasing from zero versus decreasing from full-scale deflection), caused by internal material stresses.
Dead Space (Dead Band / Dead Zone)
The range of different input values over which there is no detectable change in the output reading, commonly caused by mechanical issues like gear backlash.
Threshold
The minimum level of input required when increasing from zero before a detectable change in the instrument's output reading occurs.
Resolution
The smallest amount or change in an input variable that an instrument can discriminate and respond to.
Dynamic Characteristics
The operational criteria and response behaviors of a measuring instrument when the measured variable changes rapidly with time.
Speed of Response
The rapidity with which a measurement system or instrument responds to changes in the measured quantity.
Response Time
The time required by an instrument or measuring system to settle into its final steady-state position after an input change is applied.
Measuring Lag
The delay in the response of an instrument following a change in the measured quantity, categorized into retardation type and time delay type.
Fidelity
The ability of a system to reproduce its output in the identical waveform and shape as the input signal without introducing dynamic error.
Dynamic Error
The difference between the true value of a time-varying quantity and the value indicated by the measuring instrument, assuming zero static error.
Passive Instrument
An instrument in which the output reading is produced entirely by the energy of the quantity being measured, without any external power source.
Active Instrument
An instrument where the quantity being measured modulates the magnitude of an external power source to produce the output signal.
Null-Type Instrument
An instrument in which the effect of the measured variable is opposed by a known calibrated quantity until a zero deflection or null balance datum is reached.
Gross Errors
Human mistakes arising from carelessness, improper reading of instrument scales, or incorrect recording of data.
Systematic Errors
Consistent, repeatable errors resulting from uncalibrated instruments, unzeroed devices, or the loading effect of the instrument on the measured circuit.
Random Errors
Errors of unknown origin that cause variations among repeated measurements, which can be minimized by averaging a large number of readings.
Relative Error
The measurement error stated as a percentage of the total measured or nominal value.
Arithmetic Mean
The mathematical average of n measured values, representing the best approximation of the actual value when readings differ: xˉ=nx1+x2+⋯+xn.
Deviation
The difference between any individual measured reading and the arithmetic mean of a data series (di=xi−xˉ), whose algebraic sum across all readings is always zero.
Average Deviation
The average of the absolute values of deviations from the mean: D=n∣d1∣+∣d2∣+⋯+∣dn∣, serving as an indicator of measurement precision.
Standard Deviation (σ)
The root-mean-square value of the deviations: σ=nd12+d22+⋯+dn2, obtained by taking the square root of the variance.
Probable Error
A statistical quantity in a large sample of measurements containing only random errors, defined as probable error=0.6745σ.
Metrology
The comprehensive science of measurement, encompassing all theoretical and practical aspects across all fields of science and technology.