1/235
Looks like no tags are added yet.
The process of trimming and cutting processed tissue into uniformly thin slices for microscopic examination
Microtomy
The basic instrument used to cut tissue sections at predetermined thicknesses
Microtome
The component where the tissue block is held in position
Block holder
The component responsible for actual cutting of tissue sections
Knife carrier and knife
Parts used to align the tissue block with the knife and adjust thickness
Pawl, ratchet feed wheel, and adjustment screws
The mechanism that moves the tissue block toward the knife at a predetermined distance
Micrometer screw
The spring-balanced tooth that contacts and turns the ratchet feed wheel
Pawl
The wheel connected to the micrometer screw that controls tissue advancement
Ratchet feed wheel
The principle in which tissue advances toward the knife by a predetermined distance for uniform sections
Microtome feed mechanism
The usual cutting tool attached to the microtome
Steel knife, glass blade, or diamond blade
Microtome invented by Paldwell Trefall in 1881
Rocking (Cambridge) microtome
Microtome considered the simplest among the different types
Rocking (Cambridge) microtome
Microtome commonly used for serial sections of large paraffin-embedded tissues
Rocking (Cambridge) microtome
Microtome consisting of a heavy base, two arms, pivots, supporting column, and ratchet mechanism
Rocking (Cambridge) microtome
Microtome in which the tissue passes toward the knife in a slightly curved plane
Rocking (Cambridge) microtome
Typical section thickness of the rocking microtome
10–12 µm
Microtome invented by Minot in 1885–1886
Rotary (Minot) microtome
The most commonly used microtome in routine and research laboratories for paraffin sections
Rotary (Minot) microtome
Microtome that operates through a staged rotary action where cutting occurs during part of the rotation
Rotary (Minot) microtome
Microtome with a fixed horizontal knife
Rotary (Minot) microtome
Microtome used ideally for producing ribbons for serial sections
Rotary (Minot) microtome
Usual thickness of diagnostic paraffin sections cut using a rotary microtome
3–5 µm
Microtome heavier and more stable than the rocking microtome
Rotary (Minot) microtome
Microtome used for cutting celloidin-embedded sections and extremely hard or rough tissue blocks
Sliding microtome
Microtome developed by Adams in 1789
Sliding microtome
Microtome considered the most dangerous because of its movable exposed knife
Sliding microtome
Microtome characterized by a slow but steady cutting motion
Sliding microtome
Type of sliding microtome with movable pillars holding adjustable knife clamps
Base-sledge microtome
Sliding microtome favored for hard tissues and large blocks
Base-sledge microtome
Sliding microtome designed originally for cutting very large blocks such as the whole brain
Base-sledge microtome
Microtome type in which the block remains stationary while the knife moves backward and forward
Standard sliding microtome
Microtome used for cutting unembedded frozen sections
Freezing microtome
Microtome invented by Queckett in 1848
Freezing microtome
Microtome with a hollow and perforated block-holder stage through which carbon dioxide passes
Freezing microtome
Microtome used to cut fresh, frozen, undehydrated tissues
Freezing microtome
Microtome useful when rapid diagnosis or histological demonstration of fat is needed
Freezing microtome
Microtome used for studying certain neurological structures and heat-sensitive tissue constituents
Freezing microtome
Refrigerated apparatus containing a microtome for cutting frozen sections
Cryostat
Microtome usually housed inside the cold chamber of a cryostat
Rotary microtome
Cryostat temperature range
−5°C to −30°C
Average cryostat temperature
−20°C
Approximate time for a cryostat to freeze fresh tissue
2–3 minutes
Typical cryostat section thickness
4 µm
Microtome used for cutting very thin sections for electron microscopy
Ultrathin microtome
Sections commonly cut for electron microscopy using an ultrathin microtome
60–100 nm
Embedding medium for tissue sections cut for electron microscopy
Epoxy resin
Instrument used to examine ultrathin sections for electron microscopy
Transmission electron microscope (TEM)
Heavy metal staining used to prepare ultrathin sections for TEM
Heavy metal salt solution
Ultrathin microtome also used to prepare sections before thin sectioning
Semi-thin sectioning
Knife with less concave sides used for celloidin-embedded tissues cut on a sliding microtome
Plane-concave knife
Knife with more concave sides used for paraffin sections on base-sledge, rotary, and rocking microtomes
Biconcave knife
Knife used for frozen sections
Plane-wedge knife
Knife used for extremely hard and tough paraffin-embedded specimens with a base-sledge or sliding microtome
Plane-wedge knife
Thickness associated with plane-concave knife in the lecture table
25 nm
Thickness associated with biconcave knife in the lecture table
120 nm
Thickness associated with plane-wedge knife in the lecture table
100 nm
Angle formed between the cutting edges of a knife
Bevel angle
Typical bevel angle of microtome knives
27°–32°
Knife used for trimming and semi-thin sectioning of tissue blocks for electron microscopy
Glass knife
Knife used for cutting any type of resin block
Diamond knife
Knife characterized as brittle, expensive, but very durable
Diamond knife
Knife that is cheaper to use than conventional steel knives and can cut 2–4 µm sections easily
Disposable blade
Process of removing gross nicks and blemishes by grinding the cutting edge on a stone
Honing
Abrasive stone used in honing
Carborundum
Direction of honing
Heel to toe
Process of polishing the cutting edge and removing the burr formed during honing
Stropping
Stropping direction
Toe to heel
Process performed in the reverse direction of honing
Stropping
Tool used to polish the knife edge during stropping
Strop
Hone producing the best results for manual sharpening
Belgium yellow hone
Hone that gives a more polishing effect
Arkansas hone
Coarse hone used only for badly nicked knives
Fine carborundum hone
For Minot or plane-wedge knives, the knife is turned over to sharpen the opposite surface after every how many strokes?
10–20 strokes
During stropping, the cutting edge is positioned behind the knife movement
Edge last
Knife with less concave sides used for celloidin-embedded tissues cut on a sliding microtome
Plane-concave knife
Knife with more concave sides used for paraffin sections on base-sledge, rotary, and rocking microtomes
Biconcave knife
Knife used for frozen sections
Plane-wedge knife
Knife used for extremely hard and tough paraffin-embedded specimens with a base-sledge or sliding microtome
Plane-wedge knife
Thickness associated with plane-concave knife in the lecture table
25 nm
Thickness associated with biconcave knife in the lecture table
120 nm
Thickness associated with plane-wedge knife in the lecture table
100 nm
Angle formed between the cutting edges of a knife
Bevel angle
Typical bevel angle of microtome knives
27°–32°
Knife used for trimming and semi-thin sectioning of tissue blocks for electron microscopy
Glass knife
Knife used for cutting any type of resin block
Diamond knife
Knife characterized as brittle, expensive, but very durable
Diamond knife
Knife that is cheaper to use than conventional steel knives and can cut 2–4 µm sections easily
Disposable blade
Process of removing gross nicks and blemishes by grinding the cutting edge on a stone
Honing
Abrasive stone used in honing
Carborundum
Direction of honing
Heel to toe
Process of polishing the cutting edge and removing the burr formed during honing
Stropping
Stropping direction
Toe to heel
Process performed in the reverse direction of honing
Stropping
Tool used to polish the knife edge during stropping
Strop
Hone producing the best results for manual sharpening
Belgium yellow hone
Hone that gives a more polishing effect
Arkansas hone
Coarse hone used only for badly nicked knives
Fine carborundum hone
For Minot or plane-wedge knives, the knife is turned over to sharpen the opposite surface after every how many strokes?
10–20 strokes
During stropping, the cutting edge is positioned behind the knife movement
Edge last
The process of cutting tissue into uniformly thin sections using a microtome
Sectioning