(AI Made) Chapter 5 & 6 Practice Test Quiz

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/53

encourage image

There's no tags or description

Looks like no tags are added yet.

54 Terms

1
New cards
What is the difference between accuracy and precision?
Accuracy is closeness to the true value, precision is closeness of repeated measurements to one another
2
New cards
In a zero-baseline test, what should the computed baseline length ideally be?
Zero
3
New cards
What does a zero-baseline test primarily evaluate?
Receiver noise, receiver bias, and processing software
4
New cards
Under the quadrant rule, control should be located in at least how many project quadrants?
3
5
New cards
The Chandler wobble has a period of approximately how many days?
430 days
6
New cards
Geodetic latitude is measured from the equatorial plane to what?
The ellipsoid normal
7
New cards
Geocentric latitude is measured from the equatorial plane to what?
A line from the point to the Earth's center
8
New cards
What is the best method for transferring orthometric heights?
Spirit leveling
9
New cards
Where is the origin of the ECEF coordinate system?
The geocenter
10
New cards
Geocentric and geodetic latitude are equal only where?
At the equator and poles
11
New cards
Why do trivial baselines provide no redundancy?
They are computed from the same session observations
12
New cards
Approximately how far is NAD83 offset from the true geocenter?
2 meters
13
New cards
In ECEF coordinates, the Z-axis points toward what?
The International Reference Pole
14
New cards
Do GNSS receivers directly measure orthometric heights?
No
15
New cards
What is the deflection of the vertical?
The angle between the plumb line and ellipsoid normal
16
New cards
What is the minimum number of satellites required for relative static GNSS positioning?
4
17
New cards
Why should GNSS antennas be oriented the same direction?
To reduce phase center variation
18
New cards
How wide is a UTM zone?
6 degrees
19
New cards
What is the UTM central meridian scale factor?
0.9996
20
New cards
What is the UTM false easting?
500,000 meters
21
New cards
Under FGDC standards, positional accuracy is reported at what confidence level?
95%
22
New cards
On a station visibility diagram, what does the center represent?
The zenith
23
New cards
What format is used for an NGS PID?
2 letters followed by 4 numbers
24
New cards
Which satellite geometry generally produces the lowest PDOP?
One satellite overhead and others spread around the horizon
25
New cards
A coordinate is fully defined by what three items?
Reference frame, frame reference epoch, and coordinate epoch
26
New cards
How many vertical control benchmarks are recommended at a minimum for a project?
4
27
New cards
Where should project benchmarks ideally be located?
Near the project corners
28
New cards
Why were HARN networks established?
To improve NAD83 to GPS-level accuracy
29
New cards
In WGS84(G2139), what does G2139 represent?
GPS Week 2139
30
New cards
What does HTDP do?
Moves coordinates between reference frames and epochs
31
New cards
Do static GNSS stations require intervisibility?
No
32
New cards
What did the Lapland and Peru expeditions prove about the Earth?
It is flattened at the poles
33
New cards
Which projection is typically used for wide east-west State Plane zones?
Lambert Conformal Conic
34
New cards
What is network accuracy measured relative to?
A datum such as the NSRS
35
New cards
If h = 110.25 m and N = -27.40 m, what is H?
137.65 m
36
New cards
How many independent baselines are produced by 5 receivers?
4
37
New cards
How many times more accurate is FGCC AA-order than First Order?
1000 times
38
New cards
What does the Laplace correction convert?
Astronomic azimuth to geodetic azimuth
39
New cards
Who adopted the GRS80 ellipsoid?
International Union of Geodesy and Geophysics (IUGG)
40
New cards
Is vertical uncertainty usually larger or smaller than horizontal uncertainty?
Larger
41
New cards
A session named 49-1 represents what?
Day 49, Session 1
42
New cards
What safety factor k is used for projects more than 100 km from home base?
0.2
43
New cards
Which is usually NOT a significant source of multipath?
Fast-moving traffic
44
New cards
NAVD88 is fixed to what tide gauge?
Father Point/Rimouski, Quebec
45
New cards
NAD27 used which ellipsoid?
Clarke 1866
46
New cards
What was the initial point of NAD27?
Meades Ranch, Kansas
47
New cards
If EF = 0.99995 and SF = 0.99992, what is the combined factor?
0.99987
48
New cards
In a secant projection, is scale factor less than or greater than 1 between the secant lines?
Less than 1
49
New cards
Meaningful loop closures require baselines from how many sessions?
More than one session
50
New cards
In the conterminous United States, is geoid height N generally positive or negative?
Negative
51
New cards
What is the most common GNSS field blunder?
Incorrect antenna height measurement
52
New cards
What is the flattening formula for an ellipsoid?
f = (a - b) / a
53
New cards
What is the typical mask angle used in static GNSS planning?
15 to 20 degrees
54
New cards
What does a conformal projection preserve?
Shape and angles over small areas