1/99
A collection of 100 vocabulary flashcards for GCSE Separate Physics (Higher Tier, Top Set) focusing on electricity concepts, equations, safety, practical skills, and exam techniques.
Potential Difference Equation
The equation relating potential difference (V), current (I), and resistance (R), expressed as V=I×R.
Current Rearrangement (V=IR)
The rearrangement of Ohm's law to solve for electric current: I=RV (or I=V\divR).
Resistance Rearrangement (V=IR)
The rearrangement of Ohm's law to solve for electrical resistance: R=IV (or R=V\divI).
Charge Flow Equation
The equation defining electrical charge as the product of current and time: Q=I×t (Charge = current × time).
Electrical Power Equation
The equation calculating electrical power from potential difference and current: P=V×I.
Current Rearrangement (P=VI)
The power formula solved for current: I=VP (or I=P\divV).
Potential Difference Rearrangement (P=VI)
The power formula solved for potential difference: V=IP (or V=P\divI).
Potential Difference (V)
The energy transferred per unit charge across a component, represented by the symbol V and measured in volts (V).
Volt (V)
The unit of measurement for potential difference (V).
Electric Current (I)
The rate of flow of electrical charge, represented by the symbol I and measured in amperes (A).
Ampere (A)
The unit of measurement for electric current (I).
Resistance (R)
The opposition to the flow of electric current, represented by the symbol R and measured in ohms (Ω).
Ohm (Ω)
The unit of measurement for electrical resistance (R).
Charge (Q)
The quantity of electricity flowing in a circuit, represented by the symbol Q and measured in coulombs (C).
Coulomb (C)
The unit of measurement for electrical charge (Q).
Time (t)
The duration of current flow, represented by the symbol t and measured in seconds (s).
Second (s)
The standard unit of time (t) required when calculating charge flow using Q=I×t.
Power (P)
The rate of energy transfer, represented by the symbol P and measured in watts (W).
Watt (W)
The unit of measurement for power (P).
Kilowatt to Watt Conversion
The mathematical step of multiplying by 1000 (×1000) to convert kilowatts (kW) to watts (W) before calculating.
Milliampere to Ampere Conversion
The mathematical step of dividing by 1000 (÷1000) to convert milliamperes (mA) to amperes (A) before calculating.
Conversion of 50mA
Dividing 50mA by 1000 yields 0.050A before substituting into Q=I×t.
Conversion of 6.9kW
Multiplying 6.9kW by 1000 yields 6900W before calculating current with P=V×I.
Live Wire
The wire in a plug that operates at a dangerous electrical potential.
Metal Appliance Casing Hazard
A dangerous situation where the live wire touches a metal casing, causing the casing itself to become live.
Earth Connection
A safety feature that prevents a person touching a live metal casing from providing a path for current through their body.
Body Current Path Hazard
The risk that occurs without an earth connection, where a person touching a live metal case provides a path for current through their body.
Filament Lamp I–V Graph Shape
A curved graph that reflects how the resistance of the lamp changes with potential difference and current.
Filament Heating Effect
The process by which the filament gets hotter as potential difference and current increase.
Filament Lamp Resistance Behavior
The increase in resistance that occurs as the filament gets hotter with rising current and potential difference.
Non-Proportionality in Filament Lamps
The condition where current is not directly proportional to potential difference because the resistance increases.
Light Emitting Diode (LED)
A type of diode that conducts current in one direction only and emits light when connected with correct polarity.
Diode Conduction Direction
The directional characteristic of a diode or LED that allows it to conduct electrical current in one direction only.
LED Polarity
The specific orientation of electrical connections required for an LED to conduct current in a circuit.
Rate of Energy Transfer
The fundamental physics definition of power (P).
Wire Length vs. Resistance
The relationship stating that a longer wire has a greater electrical resistance.
Variable Resistor in Wire Length Experiments
A component adjusted to control the circuit current (and therefore heating and temperature) when changing wire length.
Temperature Control in Wire Testing
Controlling the current using a variable resistor so heating and temperature remain constant, ensuring a fair test.
Fair Test in Wire Resistance
Keeping heating and temperature controlled by adjusting a variable resistor while altering wire length.
Static Electricity Charging
The process where rubbing materials together transfers electrons between them.
Electron Transfer by Friction
The movement of electrons between materials during rubbing, causing the objects to become oppositely charged.
Opposite Charges Interaction
The electrostatic principle stating that opposite charges attract each other.
Like Charges Interaction
The electrostatic principle stating that like charges repel each other.
Balloon and Hair Electrostatic Interaction
The attraction observed between a charged balloon and hair due to them acquiring opposite charges.
Mains Frequency vs. Let-Go Current Graph
A graph illustrating the maximum current a person can let go of at different electrical supply frequencies.
UK Mains Frequency Assessment Reference
The specific frequency of 50Hz on the graph that must be read and compared to other frequencies.
Let-Go Current
The threshold of maximum electric current at which an individual can voluntarily release a live conductor.
Graph Interpretation Technique
Reading data directly from the axes, quoting the overall trend, and supporting conclusions with numerical evidence rather than guessing.
Improving Reliability
The practical technique of repeating measurements and calculating a mean.
Calculating a Mean
A data analysis step performed on repeated measurements to enhance reliability.
Calculation Step 1: Write the Equation
The initial step in solving numerical exam problems by stating the relevant physics formula.
Calculation Step 2: Rearrange
The second step in calculation technique where the formula is rearranged to isolate the target variable if required.
Calculation Step 3: Substitute Values
The third step in solving calculations where numerical values with standard units are placed into the formula.
Calculation Step 4: Calculate
The fourth step in solving numerical problems where the mathematical computation is executed.
Calculation Step 5: State the Unit
The final step in a physics calculation where the numerical answer is given with its correct standard unit.
Technique for 'Explain' Questions
Formulating a clear physics point and linking it directly to the specific effect asked about in the prompt.
Question 06 Component Caution
An exam warning advising students to revise the specific component in their circuit diagram rather than assuming it is an LDR or thermistor.
Environmental Changes Circuit Context
The context in Question 06 where a circuit responds to environmental variations.
Light Dependent Resistor (LDR) Assumption Caution
A reminder not to assume the unknown component in Question 06 is an LDR without checking the original paper.
Thermistor Assumption Caution
A reminder not to assume the unknown component in Question 06 is a thermistor without checking the original paper.
Cognito
An open online revision resource that provides clear lessons, notes, and quizzes for GCSE Physics.
Physics & Maths Tutor
An open revision resource offering Separate Physics topic notes and exam questions organized by exam board.
BBC Bitesize
An open revision resource providing accessible explanations and practice questions for physics.
FreeScienceLessons
An open revision resource featuring short GCSE Physics video explanations.
Video: Current, Potential Difference and Resistance
A recommended GCSE electricity video covering the foundational relationships between V, I, and R.
Video: Filament Lamp I–V Characteristics
A recommended video explaining the non-linear relationship and curved graph of a filament lamp.
Video: Charge Flow and Power Calculations
A recommended revision video focusing on calculations involving Q=It and P=VI.
Video: Static Electricity: Charging by Friction
A recommended video detailing electron transfer and charging via frictional rubbing.
Video: Mains Electricity Frequency and Electric Shock
A recommended video covering let-go current thresholds and mains supply frequencies.
Top-Set Check: Resistance from Graph Data
The self-check competency of rearranging V=IR and calculating resistance using data read from a graph.
Top-Set Check: Charge Flow with Unit Conversion
The self-check competency of applying Q=It while converting milliamperes (mA) to amperes (A).
Top-Set Check: Power with Unit Conversion
The self-check competency of applying P=VI while converting kilowatts (kW) to watts (W).
Top-Set Check: Unearthed Metal Case Explanation
The self-check competency of explaining why an unearthed metal casing becomes hazardous if touched by a live wire.
Top-Set Check: Curved I–V Graph Explanation
The self-check competency of explaining how heating increases resistance, producing a curved I–V graph in a filament lamp.
Top-Set Check: LED Circuit Behavior
The self-check competency of describing how an LED functions in a circuit and its polarity requirements.
Top-Set Check: Wire Resistance and Fair Testing
The self-check competency of explaining why resistance increases with wire length and designing a fair test with temperature control.
Top-Set Check: Electrostatic Attraction and Repulsion
The self-check competency of explaining how oppositely charged objects attract and like-charged objects repel.
Top-Set Check: Mains-Frequency Graph Evidence
The self-check competency of interpreting supply frequency vs. shock severity using data points from the let-go current graph.
Revision Schedule: Equations
A 10minute session dedicated to mastering and rearranging key physics equations.
Revision Schedule: Videos
A 15minute revision block allocated to watching recommended physics video explanations.
Revision Schedule: Key Concepts
A 15minute study segment focused on reviewing fundamental electricity concepts.
Revision Schedule: Exam Questions
A 15minute practice segment dedicated to attempting exam-style assessment questions.
Revision Schedule: Correct Mistakes
A final 5minute revision period designated for reviewing and correcting practice errors.
60-Minute Suggested Revision Session
A structured revision plan consisting of: 10min equations, 15min videos, 15min key concepts, 15min exam questions, and 5min correct mistakes.
Exam Focus: Calculations
A major exam priority focused on applying equations, converting units, rearranging formulas, and stating correct units.
Exam Focus: Graph Interpretation
A core testing area focused on analyzing trends and extracting data values from physics graphs.
Exam Focus: Practical-Method Explanations
An exam priority area focused on describing control variables, fair tests, and reliability measures.
Exam Focus: Electrical Safety
An assessment focus covering live wires, earthing mechanisms, metal casings, and electric shock paths.
Exam Focus: Filament Lamps
An assessment focus covering heating effects, rising resistance, and non-ohmic I–V curves.
Exam Focus: Static Charge
An assessment focus covering electron transfer via friction and electrostatic forces between charges.
Exam Focus: Mains Frequency
An assessment focus covering supply frequency effects on electric shock thresholds and let-go current.
Assessment Tier and Level
The academic level of the assessment specified as Separate Physics, Higher Tier, Top Set.
Assessment Total Marks
The total marks available on the electricity assessment upon which the revision notes are based (40 marks).
Direct Proportionality in Circuits
A linear relationship where current increases proportionally with potential difference, which fails to occur in filament lamps due to temperature changes.
Variable Resistor
A component used in circuits to adjust and control current levels, preventing unwanted heating in test wires.
Wire Temperature Control
Maintaining a constant wire temperature via current regulation to ensure resistance measurements depend solely on length.
Charged Balloon Attraction
The electrostatic attraction exerted by a charged balloon on hair due to induced opposite charges.
Mains Supply Frequency Value
The standard 50Hz frequency point evaluated on the mains electric shock risk graph.
Question 06 Diagram Revision
The instruction to verify the actual component in Question 06 from the original assessment paper before revising.
Substitution and Unit Verification
The exam practice requirement to explicitly show numerical substitutions and conclude with the appropriate standard unit.