1/29
Comprehensive vocabulary flashcards covering introductory polymer concepts, thermoplastic and thermoset classifications, material properties, and industrial forming methods.
Polymer
A large molecule composed of smaller repeating units, literally meaning "many parts" (e.g., polystyrene).
Monomer
A molecule that combines with other molecules of the same or different type to form a polymer (such as acrylonitrile, CH2=CHCN).
Oligomer
A low-molecular weight polymer that usually contains two monomer units and lacks the mechanical strength required to make practically useful articles.
Hexatriacontane
An oligomer of polyethylene with the chemical formula n-CH3-(CH2)29-CH3, which forms weak, friable crystals.
Repeating unit
A portion of a linear macromolecule such that the complete polymer (excluding chain ends) can be produced by linking a sufficiently large number of these units through bonds between specified atoms.
Polymerization
A chemical reaction in which product molecules grow indefinitely in size as long as reactants are supplied, provided the reacting monomers possess the proper functionalities.
Functionality
The number of sites available on a molecule for bonding to other molecules under the specific conditions of a polymerization reaction.
Critical molecular weight for polyethylene
A minimum molecular weight of at least about 20,000 required for polyethylene to develop sufficient mechanical strength for products like strong films, pipe, cable jackets, and bottles.
Thermoplastic materials
Polymers whose molecules slide past one another under shear forces above a certain temperature once thermal energy overcomes intermolecular attractions, allowing the material to flow.
Polyethylene (PE)
The commonest thermoplastic; possesses low strength and poor weathering resistance, but exhibits good chemical resistance and electrical insulation; used for films, tubing, bottles, cups, and battery parts.
Polypropylene (PP)
A thermoplastic that is lighter and stiffer than polyethylene, commonly used for sterilizable bottles, TV cabinets, and luggage.
Polyamides (nylons)
Thermoplastics possessing good mechanical strength and toughness, commonly utilized for bearings, gears, bushings, textiles, and rope.
Polyacetals (POMs)
Highly crystalline, translucent thermoplastics displaying good stress relaxation resistance, rigid spring-like qualities, and outstanding fatigue resistance; used in pressure vessels, clock parts, plumbing, and shoe sole plates.
Thermoplastic polyester (PET)
A polymer that forms extremely tough plastic films with excellent tear and fatigue strength, commonly applied in food packaging, video tapes, clothing, and automotive tire cords.
Fluorocarbons (PTFEs / Teflon)
A chemically inert thermoplastic usable up to 260,oC with a low coefficient of friction; used for non-stick saucepan coatings, bearings, seals, and chemical valves.
Polystyrene (PS)
A highly transparent, brittle, inexpensive thermoplastic with good thermal and dimensional stability; used for cheap molded housings and toys, or foamed with CO2 to create Styrofoam.
Polymethylmethacrylate (PMMA / 'Perspex')
An acrylic thermoplastic with fair mechanical properties but outstanding light transmission and weather resistance; used for aircraft windows, laminated windscreens, lenses, and signs.
Polyvinylchloride (PVC)
A low-cost, normally rigid general-application polymer widely used for floor coverings that can be plasticized to produce flexible goods like artificial leather, garden hoses, and clothing.
Thermosetting plastics
Polymeric materials that deform to shape under the influence of heat or catalysts for cross-linking to occur (e.g., phenolics, aminoplastics, epoxy resins, and polyesters).
Epoxies
Thermosets offering an excellent combination of mechanical properties and corrosion resistance; used as adhesives ('Araldite'), fiberglass matrices, electrical mouldings, and protective coatings.
Phenolics (phenolformaldehyde)
Inexpensive, brittle thermosets with thermal stability exceeding 150,oC; known commercially as 'Bakelite' for electrical fixtures, or combined with fillers to make 'Tufnol' and 'Formica'.
Unsaturated polyester resins (UPRs)
Fiber-reinforced thermosets that are significantly cheaper than epoxy and commonly prepared using propylene glycol; cured by a peroxide catalyst for boat hulls and automobile body parts.
Compression moulding
A process typically used for thermosets where the material is heated, formed, and cured simultaneously, permitting relatively short cycle times as the part can be demoulded while hot.
Extruder-based process
A forming method where polymer granules are compacted, mixed, and melted by a single Archimedean screw in a heated barrel at 1.3 to 1.6 Tg before being forced through a die.
Post-die devices
Devices placed downstream of an extrusion die that draw down or expand the dimensions of emerging polymer shapes (e.g., injecting air into an extruded tube to expand its diameter).
Rheological properties
The deformation and flow behavior of polymer melts, which is critical for engineers when optimizing polymer forming and processing conditions.
Parison
A hollow tube of molten polymer extruded through an annular die during blow moulding prior to inflation inside a mould cavity.
Blow process
A forming process in which an extruded molten parison is clamped in a cold mould, inflated with air against the mould cavity, solidified, and ejected as a hollow article such as a bottle.
Injection mould process
A cyclic forming process where molten polymer from an extruder is forced under pressures up to 120 MPa into a cold split mould, yielding high-precision parts with a slow cooling cycle time.
Mechanical properties of polymers
The mechanical performance characteristics of polymer materials, broadly categorized into stiffness, strength, and toughness.