1/22
Vocabulary flashcards covering the body as an engineering system, biological tissue mechanics, biomaterials classification, hydrogel tuning, and tissue engineering design principles.
Skeleton (Engineering Analogue)
The structural frame of the human body that provides load support and shape.
Joints (Engineering Analogue)
The mechanical bearings or interfaces of the body that facilitate articulation and movement between structural members.
Muscles (Engineering Analogue)
The actuators of the body that contract to generate force and produce motion.
Tendons (Engineering Analogue)
The tensile structural components responsible for force transmission between muscles and bones.
Heart (Engineering Analogue)
The mechanical pump that pressurizes and circulates fluid through the cardiovascular network.
Blood Vessels (Engineering Analogue)
The fluid network of conduits that distributes blood throughout the biological system.
Lungs (Engineering Analogue)
The gas-exchange system that transfers oxygen and carbon dioxide across biological membranes.
Nervous System (Engineering Analogue)
The electrical and chemical control system that processes information and coordinates bodily functions.
Biomedical Engineering Design Loop
The translational pathway converting clinical needs into engineering solutions: Clinical problem → Functional requirement → Engineering specification → Design + material → Manufacture → Test → Clinical outcome.
Articular Cartilage
A fluid-rich, viscoelastic, poro-elastic, and anisotropic tissue with a representative compressive aggregate modulus of ∼0.1–2MPa that functions to carry load, distribute contact stress, reduce friction, and dissipate energy.
Tendon and Ligament Mechanics
Fibre-dominated, collagen-rich connective tissues with a representative Young's modulus of ∼20–1200MPa, exhibiting high tensile stiffness, nonlinear stress-strain behaviour, and directional dependence.
Subchondral Bone Mechanics
A stiff mineral-collagen composite load-bearing tissue with a representative indentation modulus of ∼6–13GPa, displaying anisotropic behaviour that differs between cortical and trabecular architectures.
Stress (σ)
The internal mechanical force distributed over a cross-sectional area, calculated as σ=AF and expressed in Pascals (Pa).
Strain (ε)
The measure of geometric deformation defined as the fractional change in length relative to initial length, given by ε=L0ΔL.
Hooke's Law (Elastic Modulus E)
The constitutive relation describing linear-elastic deformation, expressed as σ=E⋅ε, where E=εσ is the modulus of elasticity in Pascals (Pa).
Biomaterial
A synthetic or natural material designed to interact with a biological system for a specific medical purpose.
Hydrogel
A crosslinked polymer network swollen with water that provides compliance, solute permeability, water transport, and a cell-friendly environment.
Swelling Ratio (Q)
The equilibrium swelling property of a hydrogel defined by the ratio of swollen mass to dry mass (Q=mdrymswollen).
Crosslink Density
An engineering parameter that dictates polymer network tightness; lower crosslinking yields softer hydrogels with higher swelling, whereas higher crosslinking yields stiffer materials with reduced swelling.
Tissue Engineering Triad
The integrated framework combining cells (chondrocytes or stem cells), scaffolds (engineered environments providing mechanical and biochemical support), and signals (biochemical and mechanical cues) to facilitate new tissue formation.
Fick's Law of Diffusion (Scaffold Transport)
The transport law governing solute flux (J=−DdxdC), under which diffusion time scales quadratically with length (t∼DL2); a 10× increase in scaffold thickness results in an approximately 100× longer diffusion time.
Fluid Film Lubrication
A tribological mechanism occurring between articulating cartilage surfaces where interstitial and synovial fluid reduce contact friction, yielding a shear stress approximated by σ≈Dηv (where η is viscosity, v is velocity, and D is fluid film thickness).
Anisotropy
The directional dependence of a material's physical and mechanical properties, as seen in collagen fiber orientations of bone, cartilage, and tendons.