1/66
Looks like no tags are added yet.
What is a hazard?
A potential source of harm or adverse health effects on a person or persons
What is risk?
The likelihood that a person may be harmed or suffer adverse health effects when exposed to a hazard.
What two factors must be considered when assessing risk?
The probability of an event occurring.
The potential consequences of that event.
What were the three main accident triggers reported in the healthcare sector in 2021?
Manual handling (patient handling and handling loads).
Slips, trips and falls.
Work-related aggression, shock and violence.
How many injuries did the Healthcare and Social Work sector report to the HSA in 2021?
1,860 injuries, accounting for over 20% of all reported workplace injuries.
What is risk management?
The process of recognising risks, developing strategies to manage them and mitigating against their occurrence.
Why is risk management important?
Most accidents result from a failure to assess risks or take action to control them.
Which legislation makes workplace risk management a legal requirement?
The Safety, Health and Welfare at Work Act.
What are the five governing principles of risk management?
Accept risk only when the benefit outweighs the cost.
Accept no unnecessary risk.
Anticipate and manage risk through planning.
Make risk decisions at the appropriate level.
Document all risk decisions.
What are the three main steps in risk management?
Risk identification.
Risk assessment/analysis.
Risk treatment.
What are the four risk treatment strategies?
Avoidance – eliminating the risk.
Reduction – mitigating the risk.
Retention – accepting the risk.
Transfer – transferring the risk to another party.
What is the purpose of the Safety, Health and Welfare at Work Act?
To prevent workplace injuries, accidents and illnesses by establishing occupational health and safety responsibilities.
What does the Safety, Health and Welfare at Work Act encourage?
Responsible attitudes towards workplace health and safety.
What are employees' responsibilities under the Act?
Comply with health and safety laws.
Not work under the influence of intoxicants.
Avoid improper conduct.
Wear PPE when necessary.
Cooperate with employers and colleagues.
Avoid placing themselves or others at risk.
What are employers' responsibilities under the Act?
Comply with health and safety laws.
Ensure the safety and health of employees, as far as reasonably practicable.
Provide adequate instruction and training.
Protect patients and visitors from risks.
Provide a safe workplace.
Provide safe equipment and proper facilities.
Appoint a competent person to oversee health and safety.
What is a Safety Statement?
A written action programme explaining how health and safety is managed in the workplace.
What is a Safety Statement based on?
The local risk assessment.
What is the purpose of a Safety Statement?
To plan and control workplace activities to prevent accidents and ill-health by identifying foreseeable risks and explaining how they will be managed.
What are safety representatives?
Representatives appointed by staff who have the power to inspect, investigate and make submissions regarding workplace health and safety.
What is the purpose of a risk assessment?
Recognise and control hazards.
Create awareness among employees and patients.
Establish safe working standards.
Reduce workplace incidents.
Save costs by preventing incidents rather than reacting to them.
What are the four key components of risk assessment?
Identify the hazard.
Describe the risk using the ICC approach.
Assess the risk as high, medium or low.
Identify and implement control measures.
What does ICC stand for in risk description?
Impact.
Cause.
Context.
What does a risk matrix assess?
The relationship between the probability of an event occurring and the severity of its consequences.
Why is a risk matrix used?
To determine the level of risk and help decide what action is required, whether the risk is acceptable and who is responsible for addressing it.
How is a risk rating calculated in the lecture?
Likelihood score × Impact score.
What are the five levels of impact in the risk matrix?
Negligible.
Minor.
Moderate.
Major.
Extreme.
What are the five likelihood categories in the risk matrix?
Rare/remote.
Unlikely.
Possible.
Likely.
Almost certain.
What is the risk score if likelihood is 3 (possible) and impact is 2 (minor)?
3 × 2 = 6, which is amber on the lecture's risk matrix.
What is the risk score if likelihood is 2 (unlikely) and impact is 3 (moderate)?
2 × 3 = 6, which is also amber.
What is a risk register?
A database of assessed risks facing an organisation.
Why is a risk register continually updated?
To reflect changing risks and how the organisation is managing them.
What is the purpose of a risk register?
To help managers prioritise resources, minimise risks and target improvements.
What are the five levels in the hierarchy of controls, from most effective to least effective?
Elimination.
Substitution.
Engineering controls.
Administrative controls.
Personal Protective Equipment (PPE).
Which legislation governs radiation risk assessments in the lecture?
SI 30 of 2019.
When must a radiation risk assessment be performed?
Before commencing any new work practice involving a source of ionising radiation.
What does a radiation risk assessment evaluate?
The possibility of radiation exposure to workers and members of the public from foreseeable accidents.
What is the purpose of a radiation risk assessment?
To identify areas where radiation protection measures should be implemented to reduce the risk of exposure.
Which organisation is responsible for enforcement and licensing of X-ray machinery in Ireland, according to the lecture?
The Environmental Protection Agency (EPA), through its Radiation Protection regulation unit.
What are some common workplace hazards in radiography?
Lifting loads and manual handling.
Slips, trips and falls.
Violence and aggression.
Machines and equipment.
Repetitive fast work and awkward positions.
Noise.
Stress.
Chemicals.
The work environment.
What are the main risks associated with manual handling?
Musculoskeletal injuries and physical strain from lifting or moving patients and loads incorrectly.
What is the second most common cause of workplace injuries highlighted in the lecture?
Slips, trips and falls.
What proportion of slips, trips and falls result in work absence of more than one month, according to the lecture?
Approximately one fifth.
What precaution should be taken when using surface disinfectants?
Wear appropriate PPE.
Which organisation governs notifiable radiation incidents under SI 256 of 2018?
HIQA (Health Information and Quality Authority).
Who should be contacted following a radiation-related incident?
The Radiation Protection Officer (RPO), or a medical physicist if the RPO is unavailable.
Within how many working days must a reportable radiation incident be reported to HIQA?
Within 3 working days.
What adult overexposure threshold is listed in the lecture for a potentially reportable incident?
An exposure more than twice the intended exposure that results in a dose greater than 10 mSv or 20 times the intended dose.
What child overexposure threshold is listed in the lecture for a potentially reportable incident?
An exposure more than twice the intended exposure that results in a dose greater than 3 mSv or 15 times the intended dose.
What dose threshold is listed for an incorrect procedure or incorrect anatomy?
Greater than 1 mSv.
What dose threshold is listed when an incorrect patient is exposed or a patient receives an unintended exposure?
Greater than 1 mSv, including exposure of a foetus.
What are the three main steps following an accident or incident?
Care of the victim.
Reporting of the accident.
Recording of the accident.
What is an incident?
An event or circumstance that could have, or did, lead to unintended and/or unnecessary harm.
What is a near miss?
An event that could have resulted in harm but did not, either by chance or timely intervention.
What is incident reporting?
The process of capturing and documenting information about a specific incident or event.
What information should be included in an incident report?
Who was involved.
What happened.
When it happened.
Where it happened.
Why it happened.
Any other relevant details.
What is root cause analysis?
Examining the underlying reasons why an incident occurred to identify risks and prevent similar incidents in the future.
What is the purpose of incident reporting and root cause analysis?
To identify risks, learn from incidents and introduce measures to prevent similar events from happening again.
What is Heinrich's triangle, also known as Bird's triangle?
A model showing the relationship between serious accidents, minor accidents and near misses.
What does Heinrich's/Bird's triangle propose?
Reducing minor accidents and near misses can help reduce the number of serious accidents.
What should be done when a workplace incident occurs?
It must be reported honestly to a senior person in the department, who investigates and completes an incident form.
Who should an incident be reported to in a radiography department?
Senior Radiographer.
Clinical Specialist Radiographer (CSR).
Radiographic Services Manager (RSM).
Who must be informed if an incident is radiation-related?
The Radiation Protection Officer (RPO), or medical physicist if the RPO is unavailable. They determine whether it may need to be reported to HIQA and/or the EPA.
What are the key tips for safe working in a radiography department?
Never perform a task unless trained.
Wear appropriate PPE.
Keep the room organised.
Use equipment to reduce manual handling.
Ask for additional training when needed.
Know departmental safe words and emergency/panic buttons.
Report incidents and near misses immediately.
Why should radiographers never perform tasks unless they are trained?
To prevent avoidable accidents, injuries and risks to patients and staff.
Why is room preparation important for health and safety?
It helps maintain an organised environment and reduces hazards such as trips, falls and equipment-related accidents.
Why should radiographers use equipment to assist with manual handling?
To reduce physical strain and the risk of musculoskeletal injury when moving patients.
Why is it important to report near misses even when nobody is injured?
Because they highlight potential hazards and allow corrective action to be taken before a more serious incident occurs.