1/41
Looks like no tags are added yet.
Name the NSRs
BACT and LAER
NSPS does what
creates baseline for BSER for new and existing facilities. can never go below this baseline. statutory rule used in Clean Power Plan and goes to court for West Virginia vs EPA
Section 112 lists what
109 HAPs
If you’re a facility that emits HAPs, you need a what?
MACT (highest standard for technology control)
If you are an existing facility that emits HAPs, you must follow the MACT, which is set at what?
set at the 12% best performing facilities
Is RACT part of NSR?
NO
Is LAER part of NSR
Yes
Is BACT part of NS
Yes
BSER is the what
the baseline for all technology-based controls
is MACT or BSER more stringent?
MACT is more stringent than BSER
BSER applies to which pollutants
criteria pollutants and HAP
MACT does what
creates technology standards for the list of 189 HAP
what was the conclusion of West Virginia vs EPA
EPA is overstepping. Congress would have specified if they wanted to shut down a whole industry (coal).
the CWA was built around what
the CWA was built around point sources
CWA regulates what
3 pollutants, 4 sources
examples of conventional pollutants
sewage, organic waste
another name for toxic pollutants
priority pollutants
what 3 pollutants does CWA regulate
conventional, toxic, non-conventional
what 4 sources does CWA regulate
industrial point sources, POTWs, indirect sources, non-point sources
example of industrial point sources
pipe into a river
example of POTW
treatment plants
example of indirect source
company that sends waste into sewers and into POTW
example of non-point sources
agriculture runoff, urban runoff
a TMDL is kind of like what
FIP, backstop to the backstop
challenges of TMDL
needed per pollutant, per waterway. there are so many waterways, so it’s a lot to manage
what are the 6 criteria pollutants
carbon monoxide, lead, nitrogen dioxide, PM (2.5 and 10), sulfur dioxide, ozone
what is MCLG
goal, not binding standard. aspirational.
what is MCL
the binding standard after cost-benefit analysis. what is “feasible”.
difference between CEQA and NEPA
CEQA is for california and more substantive and more pro environment, NEPA is for federal and more procedural
EIS for
NEPA
EIR for
CEQA
difference between EIS and EIR?
EIS for NEPA, EIS for CEQA
categorical exclusion
difference between CAA and CWA
they’re reversed. technology standards used last in CAA and first in CWA (easiest to do with CWA)
when there’s an industrial point source or a POTW, you need what
NPDES permit
indirect sources need what
to meet pre-treatment criteria before releasing waste into the sewers (no NPDES needed)
what is the water quality standard
the backstop to the NPDES
what is the TMDL program
the backstop to the water quality standard
what 3 programs (in order of significance) does the CWA use to regulate
NPDES, clean water standards, TMDL
difference between indirect and non-point source
indirect is putting something in a sewer for the POTW to deal with, non-point is runoff
NPDES applies to what sources
point sources and POTW
SIPS is an example of what
cooperative federalism