1/43
Comprehensive practice flashcards covering muscle tissue types, gross and microscopic skeletal muscle anatomy, excitation-contraction coupling, sliding filament mechanism, energy systems, motor units, and fiber types from Marieb Human Anatomy & Physiology Chapter 9.
Which three prefixes specifically refer to muscle in anatomical terminology?
The prefixes are myo, mys, and sarco (e.g., sarcoplasm refers to muscle cell cytoplasm).
Which two types of muscle cells are elongated and specifically designated as muscle fibers?
Only skeletal and smooth muscle cells are elongated and referred to as muscle fibers.
What are the three key descriptive words and defining characteristics of skeletal muscle tissue?
Skeletal, striated, and voluntary. Skeletal muscle fibers are the longest of all muscle cells, have obvious stripes (striations), can be consciously controlled, contract rapidly, tire easily, and are powerful.
What are the key descriptive words and features of cardiac muscle tissue?
Cardiac, striated, and involuntary. It is found only in the heart walls, contracting at a steady rate set by the heart's pacemaker, though the nervous system can increase this rate.
What are the key descriptive words and locations of smooth muscle tissue?
Visceral, nonstriated, and involuntary. It is found in the walls of hollow visceral organs (such as the stomach, urinary bladder, and respiratory airways).
What are the four general functional characteristics shared by all muscle tissues?
Excitability (responsiveness): ability to receive and respond to stimuli.
Contractility: ability to shorten forcibly when stimulated.
Extensibility: ability to be stretched.
Elasticity: ability to recoil to resting length.
What are the four vital functions of muscles in the human body?
Producing movement (locomotion, manipulation, digestion, pumping blood)
Maintaining posture and body position
Stabilizing joints
Generating heat as they contract
What are the three connective tissue sheaths of skeletal muscle from external to internal?
Epimysium: dense irregular connective tissue surrounding the entire muscle; may blend with fascia.
Perimysium: fibrous connective tissue surrounding fascicles (bundles of muscle fibers).
Endomysium: fine areolar connective tissue surrounding each individual muscle fiber.
What is the difference between a muscle's insertion and its origin?
The insertion is the muscle attachment to the movable bone, whereas the origin is the attachment to the immovable or less movable bone.
How do direct (fleshy) and indirect muscle attachments differ?
In direct attachments, the epimysium is fused directly to the periosteum of bone or perichondrium of cartilage. In indirect attachments, connective tissue wrappings extend beyond the muscle as a ropelike tendon or a sheetlike aponeurosis.
What are the sarcolemma, sarcoplasm, glycosomes, and myoglobin in a skeletal muscle fiber?
What proportion of skeletal muscle cell volume is occupied by myofibrils?
Myofibrils account for approximately 80% of the muscle cell volume.
what is MYOFIBRILS
are densely packed, rodlike organelles inside the muscle fiber
What is a sarcomere and how is it anatomically delimited?
A sarcomere is the smallest contractile (functional) unit of a muscle fiber. It consists of the area between two successive Z discs, containing an entire A band and half of an I band at each end. (shortens)
How are thick and thin myofilaments arranged within a sarcomere?
Thick (myosin) filaments extend the entire length of the A band and connect at the M line.
Thin (actin) filaments extend across the I band, partway into the A band, and anchor to the Z discs.
In cross section, each thick filament is surrounded by a hexagonal arrangement of six thin filaments.
What is the molecular structure of a thick filament?
It is composed of the protein myosin, which has two heavy and four light polypeptide chains. The heavy chains intertwine to form the tail, while the light chains form the globular heads that bear actin-binding sites, ATP-binding sites, and flexible hinge regions.
What are the molecular components of thin filaments?
Thin filaments consist of two strands of fibrous actin coiled into a helix, composed of kidney-shaped G actin subunits carrying active sites for myosin heads, along with the regulatory proteins troponin and tropomyosin.
What is the primary function of the sarcoplasmic reticulum (SR) in skeletal muscle fibers?
The sarcoplasmic reticulum is a network of smooth endoplasmic reticulum tubules that regulates intracellular Ca2+ levels by storing and releasing Ca2+.
What is T TUBULES main job?
– Tube formed by protrusion of sarcolemma deep into cell interior
Increase muscle fiber’s surface area greatly
Lumen continuous with extracellular space
Allow electrical nerve transmissions to reach deep into interior of each
muscle fibe
How does intracellular Ca2+ trigger cross bridge formation?
High cytosolic Ca2+ binds to troponin, causing troponin to change shape and pull tropomyosin away from the myosin-binding sites on actin, allowing myosin heads to bind actin.

What are the four sequential steps of the cross bridge cycle shown in this diagram?
Cross bridge formation: energized myosin head attaches to actin thin filament.
Power (working) stroke: ADP and Pi are released; the myosin head pivots and pulls the actin filament toward the M line.
Cross bridge detachment: ATP binds to the myosin head, weakening the actin-myosin link and causing the head to detach.
Cocking of the myosin head: ATP hydrolysis into ADP and Pi returns the myosin head to its high-energy, cocked prestroke position.
What is the physiological cause of rigor mortis after death?
ATP synthesis ceases, so Ca2+ cannot be pumped back into the sarcoplasmic reticulum, elevating intracellular Ca2+ and promoting continuous cross bridge formation. Without ATP to bind myosin heads, cross bridges cannot detach, locking muscles in contraction until muscle proteins degrade.
What is the postmortem timeline for the onset and peak of rigor mortis?
Rigor mortis begins 3–4 hours after death and reaches peak rigidity at approximately 12 hours postmortem.
What events occur at the neuromuscular junction (NMJ) upon arrival of an action potential?
Action potential (nerve impulse) reaches axon terminal.
Voltage-gated Ca2+ channels open; Ca2+ enters the axon terminal.
Ca2+ entry stimulates exocytosis of acetylcholine (ACh) into the synaptic cleft.
ACh diffuses across and binds to receptors on the sarcolemma junctional folds.
Chemically gated channels open, allowing simultaneous entry of Na+ and exit of K+ (more Na+ enters than K+ exits), producing an end plate potential (EPP).
Acetylcholinesterase terminates ACh activity by breaking it down.
What causes the homeostatic imbalance known as myasthenia gravis, and what are its symptoms?
It is an autoimmune disease characterized by a shortage of ACh receptors because a person's own antibodies attack them. Symptoms include drooping upper eyelids, difficulty swallowing and talking, and generalized muscle weakness.
What is the difference between an isometric and an isotonic muscle contraction?
Isometric contraction: muscle tension increases but does not exceed the load, resulting in no muscle shortening. (Head staying still)
Isotonic contraction: muscle tension exceeds the load, resulting in muscle shortening. (flexing the muscle)
What constitutes a motor unit, and how does its size affect fine motor control?
A motor unit consists of a single motor neuron and all the muscle fibers (four to several hundred) it innervates. The smaller the number of muscle fibers per motor unit, the greater the fine motor control.

What are the three distinct phases of an isometric muscle twitch shown in this myogram?
Latent period: the initial delay during excitation-contraction coupling where no tension is recorded.
Period of contraction: cross bridges are active and tension rises to a peak.
Period of relaxation: Ca2+ is pumped back into the SR, cross bridges decline, and muscle tension returns to zero.

Based on this myogram comparison, how do twitch duration and speed vary between the lateral rectus, gastrocnemius, and soleus muscles?
The lateral rectus (extraocular eye muscle) contracts and relaxes rapidly and briefly; the gastrocnemius exhibits an intermediate contraction speed and duration; the soleus calf muscle contracts most slowly and holds tension longer.
What is muscle tone, and what causes it?
Muscle tone is the constant, slightly contracted state of all muscles due to spinal reflexes; it keeps muscles firm, healthy, and ready to respond.
How long do stored ATP reserves support muscle contraction, and what three mechanisms regenerate ATP?
Stored ATP is depleted in 4–6 seconds. ATP is regenerated by:
Direct phosphorylation of ADP by creatine phosphate (CP)
Anaerobic pathway (glycolysis and lactic acid formation)
Aerobic pathway (cellular respiration)
How much ATP is yielded per glucose molecule in the aerobic pathway, and what percentage of ATP does it produce during rest and light-to-moderate exercise?
The aerobic pathway produces 32 ATP per glucose molecule (along with CO2 and H2O) and provides approximately 95% of the ATP required during rest and light-to-moderate exercise.
What fuels are consumed during prolonged exercise, and which becomes the predominant fuel after 30 minutes?
Fuels include muscle glycogen, bloodborne glucose, pyruvic acid, and free fatty acids from adipose tissue. Free fatty acids become the major fuel after 30 minutes of exercise.
What is the difference between aerobic endurance and the anaerobic threshold?
Aerobic endurance: the length of time a muscle can contract using aerobic pathways.
Anaerobic threshold: the point at which muscle metabolism converts to the anaerobic pathway.
What physiological factors contribute to muscle fatigue?
Ionic imbalances, elevated inorganic phosphate (Pi) from CP and ATP breakdown interfering with SR Ca2+ release, decreased ATP, increased magnesium, and depleted glycogen. Total lack of ATP is rarely the cause except in severely stressed muscles.
What four requirements must be met for a muscle to return to its pre-exercise resting state?
Oxygen reserves must be replenished.
Lactic acid must be reconverted to pyruvic acid.
Glycogen stores must be replaced.
ATP and creatine phosphate reserves must be resynthesized.
What four factors govern the force of skeletal muscle contraction?
Number of muscle fibers stimulated (recruitment; more motor units = greater force)
Relative size of fibers (hypertrophy increases force)
Frequency of stimulation (temporal summation and tetanus)
Degree of muscle stretch (sarcomeres at 80%–120% of resting length generate maximum force)
How does sarcomere length affect contractile force when stretched below 80% or above 120% of resting length?
If a sarcomere is below 80% resting length, myofilaments overlap too much and force decreases. If above 120% resting length, filaments do not overlap enough for cross bridges to bind, decreasing force.
How does load influence the velocity and duration of muscle contraction?
Muscles contract fastest with no added load. The greater the load, the slower the contraction velocity and the shorter the duration of the contraction.

According to Table 9.2, how do the three skeletal muscle fiber types differ in primary ATP pathway, rate of fatigue, and best-suited activities?
Slow Oxidative: Aerobic pathway; slow (fatigue-resistant) rate of fatigue; suited for endurance activities (e.g., marathons, maintaining posture).
Fast Oxidative: Aerobic with some anaerobic glycolysis; intermediate rate of fatigue; suited for sprinting and walking.
Fast Glycolytic: Anaerobic glycolysis; fast (fatigable) rate of fatigue; suited for short-term intense or powerful movements (e.g., hitting a baseball).
Why are slow oxidative fibers red while fast glycolytic fibers are white (pale)?
Slow oxidative fibers contain high myoglobin content, many mitochondria, and rich capillary beds, giving them a red appearance. Fast glycolytic fibers contain low myoglobin, few mitochondria, and few capillaries, giving them a white (pale) appearance.
How do muscle adaptations differ between aerobic exercise and resistance exercise?
Aerobic (endurance) exercise increases muscle capillaries, mitochondria count, and myoglobin synthesis, improving endurance, strength, and fatigue resistance (can convert fast glycolytic to fast oxidative fibers).
Resistance exercise induces muscle hypertrophy (increased fiber size), increases myofilaments, glycogen stores, and connective tissue, increasing muscle mass and strength.
What physiological changes occur during disuse atrophy, and how rapidly does strength decline?
Disuse atrophy begins almost immediately due to immobilization or loss of neural stimulation. Muscle strength declines at a rate of 5% per day. Paralyzed muscles may atrophy to one-fourth (41) their initial size, with lost muscle tissue permanently replaced by fibrous connective tissue.