1/155
Comprehensive vocabulary flashcards covering enzyme properties, kinetics, catalytic mechanisms, metabolic pathways, thermodynamics, and glycolysis based on lecture slides for Chapters 5, 6, 10, and 11.
Enzyme
An organic catalyst, typically a protein or rarely an RNA molecule, that accelerates biochemical reactions under physiological conditions (37∙C, atmospheric pressure, and neutral pH) without being consumed or altering reaction equilibrium (Keq) or net free energy change (ΔG).
Activation Energy (Ea)
The minimum amount of energy required for colliding reactant molecules to reach the high-energy transition state and proceed to form products.
Induced-Fit Model
Explains how enzymes bind substrates through a flexible active site. Upon binding, both the enzyme and substrate undergo a conformational change that stabilizes the transition state and lowers activation energy. Afterward, products are released and the enzyme returns to its original shape.

Initial Velocity (v0)
The rate of an enzymatic reaction measured over a brief time period at the very beginning of the reaction before substrate concentration decreases.
Michaelis Constant (Km)
The substrate concentration at which the reaction velocity is 21Vmax, indicating the substrate level needed to occupy 50% of the enzyme active sites; Lower Km corresponds to higher affinity, while a higher Km corresponds to lower affinity. (Km=k1k−1+k2 ).
Maximum Velocity (Vmax)
The maximum reaction velocity when all enzyme active sites are effectively occupied by substrate.
At Vmax, adding more substrate does not significantly increase the rate, dependent directly on total enzyme concentration (Vmax=k3[E]).
Increasing the substrate concentration [S] will increase initial velocity only if the enzyme is not already saturated.
Catalytic Constant (kcat)
Also called the turnover number (kcat=[E]totalVmax), it is the number of substrate molecules converted into product per active site per second when the enzyme is saturated. (s^-1)
Catalytic Efficiency (kcat/Km)
Catalytic efficiency compares how effectively an enzyme binds and converts substrate.
Efficiency = kcat / Km
A larger kcat/Km generally indicates greater catalytic efficiency.
Units: M⁻¹s⁻¹.
Catalytic Proficiency
Measures how much an enzyme speeds up a reaction compared to the same reaction without an enzyme.
Without enzyme: (kn) = rate constant of the uncatalyzed reaction.
With enzyme: (kcat/Km) = catalytic efficiency of the enzyme.
Key idea: Higher (kcat/Km) = greater enzyme efficiency
Lineweaver-Burk Plot
A linear double-reciprocal plot of v01 versus [S]1 based on the equation v01=(VmaxKm)[S]1+Vmax1, where the y-intercept is Vmax1, the x-intercept is −Km1, and the slope is VmaxKm.
![<p>A linear double-reciprocal plot of $$\frac{1}{v_0}$$ versus $$\frac{1}{[S]}$$ based on the equation $$\frac{1}{v_0} = \left(\frac{K_m}{V_{\max}}\right)\frac{1}{[S]} + \frac{1}{V_{\max}}$$, where the y-intercept is $$\frac{1}{V_{\max}}$$, the x-intercept is $$-\frac{1}{K_m}$$, and the slope is $$\frac{K_m}{V_{\max}}$$.</p>](https://assets.knowt.com/pdf-flow-prod/4f322fc3-f9bd-4c3f-8aaa-da4299a8ba0f-figures/22.jpg)
Competitive Inhibition
A reversible inhibition mode where an inhibitor directly competes with the substrate for the active site, resulting in an increased Km (a higher substrate concentration is required to reach half of the unchanged Vmax), while leaving Vmax unchanged.
Increasing substrate concentration can overcome the inhibition.
Noncompetitive Inhibition
A reversible inhibition mode where an inhibitor binds to an allosteric site on both free enzyme (E) and enzyme-substrate complex (ES), changing the conformation, decreasing Vmax without changing Km.
Allosteric Enzymes
A regulatory molecule binds to a location other than the active site, called the allosteric site. This changes the enzyme's shape, affecting its activity.
Allosteric activator: Increases enzyme activity.
Allosteric inhibitor: Decreases enzyme activity.
Multi-subunit regulatory enzymes (quaternary structure) where binding at one site affects binding at other subunits (cooperativity). This produces a sigmoidal (S-shaped) curve. They switch between:
T (tense): Low substrate affinity.
R (relaxed): High substrate affinity.
Proteolytic activation- Zymogen
Some enzymes are produced as inactive precursors called zymogens.
They become active when a peptide bond is cleaved.
Example: Trypsinogen is converted into trypsin.
advantage is speed. allows rapid, irreversible enzyme activation.
Oxidoreductases
The major enzyme class that catalyzes oxidation-reduction reactions involving the transfer of electrons, hydrides, or hydrogen atoms between molecules.
Transferases
transfer of functional groups (such as acyl, methyl, or phosphoryl groups) from one molecule to another (A-X+B→A+B-X).
Hydrolases
catalyzes hydrolytic bond cleavage (C–C, C–N, C–O) via the nucleophilic addition of water (AB+H2O→AOH+BH).
Lyases
catalyzes non-hydrolytic bond cleavages that generate double bonds, or conversely add groups to double bonds without ATP consumption, synthase joins molecules together without using ATP directly.
Isomerases
catalyzes geometric, structural, or stereochemical rearrangements within a single molecule. one substrate and one product.
Ligases
(also called synthetases) that catalyzes the condensation and joining of two molecules with the formation of C–C, C–S, C–O, or C–N bonds, usually using energy from ATP hydrolysis
Nucleophilic substitution
nucleophile attacks electrophile replacing leaving group
Acid-Base Catalysis
involves the transfer of protons (H⁺) to help a chemical reaction occur.
An acid donates a proton.
A base accepts a proton.
Enzymes contain amino acid side chains that can function as acids or bases.
Factors affecting acid-base catalysis
pH: Changes the protonation state of amino acid side chains.
pKa: Determines how easily a group gains or loses a proton.
Active-site environment: Can alter the pKa of amino acids.
Amino acid positioning: Catalytic residues must be properly positioned.
Histidine commonly participates.
Covalent Catalysis
occurs when an enzyme temporarily forms a covalent bond with its substrate.
The enzyme becomes part of a temporary reaction intermediate.
Example: Serine proteases
The serine residue attacks a peptide bond, forming a temporary covalent acyl-enzyme intermediate.
Proximity Effect
A physical catalytic mechanism whereby an enzyme specifically binds and orients substrate molecules within the active site, drastically increasing their effective local concentration and promoting transition-state formation.
Transition State Stabilization
The primary physical mechanism of enzymatic rate acceleration wherein the enzyme active site establishes maximal complementary interactions specifically with the transition-state geometry, lowering the free energy barrier (Ea).
Transition State Analog
A stable chemical compound designed to mimic the geometry and charge distribution of a reaction's transition state, thereby binding to the enzyme active site with extremely high affinity as a competitive inhibitor.
Diffusion-Controlled Reaction
A reaction that occurs upon virtually every encounter between enzyme and substrate molecules, operating near the physical collision limit in solution (108 to 109M−1s−1).

Catalytic Triad
A conserved arrangement of three amino acid residues—Asp-102, His-57, and Ser-195—at the active site of serine proteases that functions collaboratively to generate a powerful nucleophile for peptide bond cleavage.
Oxyanion Hole
A pocket in serine proteases containing backbone amide hydrogens (Gly-193 and Ser-195) that specifically stabilizes the negatively charged oxygen of the tetrahedral intermediate via hydrogen bonding.
Substrate Specificity Pockets of Serine Proteases
Structural crevices adjacent to the catalytic triad that dictate peptide cleavage preference: chymotrypsin possesses a deep hydrophobic pocket for aromatic residues; trypsin features an anionic Asp residue at the base for cationic residues; elastase contains bulky Val and Thr residues creating a shallow pocket for small aliphatic side chains.

Metabolism
Metabolism = entire network of chemical reactions carried out by living cells; hundreds of enzyme reactions organized into discrete pathways
Metabolites
Metabolites = small molecules that are intermediates in the degradation or biosynthesis of biopolymers ( examples are glucose, pyruvate, ATP)
Catabolism
oxidative, exergonic pathways that break down larger molecules into simpler products, capturing released energy in the form of ATP and reduced coenzymes (NADH, FADH2).
Anabolism
reductive, endergonic biosynthetic pathways that consume ATP (and NADPH) and reducing power to make larger molecules from smaller molecules.
Steady State
A condition in an open system where the concentrations of reactants and products remain relatively constant over time because the rate of input equals the rate of output. It requires a continuous input of energy and matter to keep reactions flowing in one direction and allow the cell to do work.
Metabolic Flux
The rate at which molecules flow through a metabolic pathway (how fast substrates are converted into products). Regulated by substrate availability, removal of products, and the activity of key rate-determining enzymes.
Feedback Inhibition (negative feedback)
A regulatory mechanism where the end product of a metabolic pathway allosterically inhibits an enzyme catalyzing an early, usually committed step, preventing unnecessary intermediate accumulation.
Feed-Forward Activation (positive feedback)
A regulatory mechanism in which an early intermediate in a pathway allosterically stimulates the activity of an enzyme situated further downstream, coordinating pathway throughout.
Compartmentation
The segregation of distinct metabolic pathways into specialized organelles or intracellular compartments, enabling the simultaneous operation and independent regulation of opposing pathways.
Phosphoryl-Group-Transfer Potential
A quantitative thermodynamic measure (ΔGhydrolysis∘′) of the affinity of a phosphorylated molecule to transfer its phosphate group; compounds with potentials more negative than ATP can drive the substrate-level phosphorylation of ADP to ATP.
Substrate-Level Phosphorylation
The direct synthesis of ATP (or GTP) via transfer of a phosphoryl group from a high-energy metabolic intermediate (such as 1,3-bisphosphoglycerate or phosphoenolpyruvate) to ADP, independent of membrane proton gradients.
Glycolysis
A ten-step anaerobic cytosolic pathway that degrades one molecule of glucose into two molecules of pyruvate, yielding a net gain of 2ATP and 2NADH.
Hexokinase
The transferase that catalyzes step 1 of glycolysis, using ATP to phosphorylate glucose to glucose 6-phosphate (G6P), trapping it intracellularly in a metabolically irreversible reaction.
Phosphofructokinase-1 (PFK-1)
The primary regulatory allosteric transferase of glycolysis (step 3), which transfers a phosphoryl group from ATP to fructose 6-phosphate to yield fructose 1,6-bisphosphate; it is inhibited by high [ATP] and citrate, and activated by AMP and fructose 2,6-bisphosphate.
Fructose 2,6-Bisphosphate (F-2,6-BP)
A potent allosteric activator of PFK-1 synthesized by PFK-2 when glucose is abundant, which overrides ATP-mediated inhibition to stimulate glycolytic flux.
Aldolase
The lyase that catalyzes step 4 of glycolysis, cleaving fructose 1,6-bisphosphate into two triose phosphates: dihydroxyacetone phosphate (DHAP) and glyceraldehyde 3-phosphate (GAP).
Triose Phosphate Isomerase
The diffusion-controlled isomerase that catalyzes the rapid, reversible interconversion of dihydroxyacetone phosphate (DHAP) into glyceraldehyde 3-phosphate (GAP) in step 5 of glycolysis.
Glyceraldehyde 3-Phosphate Dehydrogenase (GAPDH)
The oxidoreductase catalyzing step 6 of glycolysis, which oxidizes glyceraldehyde 3-phosphate and incorporates inorganic phosphate (Pi) to yield the high-energy intermediate 1,3-bisphosphoglycerate and NADH.
Phosphoglycerate Kinase
The transferase in step 7 of glycolysis that carries out the first substrate-level phosphorylation, transferring a phosphoryl group from 1,3-bisphosphoglycerate to ADP to generate ATP and 3-phosphoglycerate.
Pyruvate Kinase
The regulated transferase in step 10 of glycolysis that catalyzes the substrate-level phosphorylation transferring a phosphate from phosphoenolpyruvate (PEP) to ADP, yielding ATP and pyruvate.
Lactate Fermentation
An anaerobic pathway in which pyruvate is reduced to L-lactate by lactate dehydrogenase, oxidizing NADH to NAD+ to sustain glycolytic ATP generation when oxygen is depleted.
Ethanol Fermentation
A two-step anaerobic pathway in yeast wherein pyruvate is decarboxylated by pyruvate decarboxylase to acetaldehyde, followed by reduction to ethanol by alcohol dehydrogenase to regenerate NAD+.
The Cori Cycle
The physiological inter-organ cycle in which lactate generated by anaerobic glycolysis in active muscle enters the bloodstream, travels to the liver for conversion to glucose via gluconeogenesis, and returns to the muscle.
why does the flat plateau at the end of a progress curve ([P] vs time) represent?
The reaction has reached equilibrium or steady state. All substrate has been converted to product and net reaction rate has dropped to zero (change in P over change in T = 0)
what determines the height of the plateau on a progress curve?
the starting substrate concentration [S] determines the final plateau height because it sets the maximum amount of product that can form
if you keep starting [S] constant and vary only [E], will the progress curves reach different plateaus?
No. Enzymes speed up the reaction rate without changing the final product yield, so every curve reaches the exact same plateau.
how do two progress curves compare when they have the same starting [S] but different [E]?
the reaction with higher [E] has a steeper initial slope (initial velocity) and reaches the plateau faster, while both curves finish at the same height
how does substrate concentration affect initial velocity at very low substrate concentration?
reaction velocity is directly proportional to substrate concentration, so double substrate concentration will double initial velocity
how does doubling the enzyme concentration affect Vmax and Km?
Vmax doubles because Vmax= kcat(E)total.
Km stays unchanged
Nonallosteric enzymes
– Hyperbolic curve.
– No cooperativity.
– Show Michaelis-Menten
kinetics.
compare hexokinase and glucokinase by tissue location, Km for glucose, and affinity during fasting (~5mM vs after a meal ~10mM)
hexokinase (all body cells): low Km (0.15 mM) = high affinity. already saturated at fasting (5mM) and rate doesnt increase after meal
Glucokinase (Liver only): High Km (20mM)= low affinity. mostly inactive during fasting, but activity surges after a meal (10mM).
How to find which enzyme is more efficient in terms of its substrate affinity?
Assuming we have same concentration of enzyme and active
sites.
find ½ Vmax, determine Km for both. Lower Km = more efficient
Catalase has a kcat of 10^7.What does it literally mean?
it converts 10^7 substrate molecules to product each second per mole of enzyme active site under saturated conditions.
Under which conditions is Km important?
when substrate concentration is low because most enzyme active sites are empty and available to bind substrate
when is kcat important?
when substrate concentration is high because all enzyme active sites are completely saturated with substrate. adding more substrate doesn’t increase the rate, so the equation simplifies to initial velocity = kcat [E] = Vmax
Covalent modification
Enzyme activity changes through the addition or removal of chemical groups.
A common example is phosphorylation.
Kinases add phosphate groups.
Phosphatases remove phosphate groups.
Phosphorylation may activate or inhibit an enzyme, depending on the enzyme.
irreversible inhibitors
the inhibitor molecule forms stable covalent bonds with the enzyme and binds permanently, abolishing enzymatic activity
uncompetitive inhibition
inhibitor binds to an allosteric site only to the enzyme-substrate complex, preventing product formation. Binds only after substrate attaches, decreases both Vmax and Km.
mixed inhibition
inhibitor binds to both free enzyme and enzyme-substrate complex but with different affinities. Vmax decreases , Km may increase or decrease
nucleophilic substitution rxn types
charged intermediate (stable and detectable)
Direct displacement, producing a transition state (very unstable, undetectable)
why is transition state less stable than intermediate?
cuz it contains partially formed and partially broken bonds rather than complete covalent bonds and transition states don’t always satisy octet rule. also transition states are at local energy maximum whereas intermediate is in local energy minimum
2 ways that covalent bonds can be cleaved
both electrons stay with one atom forming carbanion and proton or carbocation and hydride
one electron remains with each atom resulting in formation of two free radicals (very unstable and less common)
what is the rate determining step
the transiton state with higher energy
aside from direct catalysis, what are other key functions of amino acid residues in an enzyme’s active site?
substrate binding- help hold and position the substrate
transition state stabilization- stabilize the transition state to lower activation energy
help bind/ interact with cofactors
charged side chain attract oppositely charged substrate gorups
the active sites microenvironment can change amino acid pKa values compared to free amino acids
Not all pH profiles are bell-shaped. Some pH profiles are sigmoidal. What might this indicate?
sigmoidal mean there’s 1 ionizable group. it depends on a single protonation or deprotonation step leveling off into a plateau. bell shaped means 2 ionizable groups. requires one group to be deprotonated and other to be protonated.
proximity affect (physical mechanism of catalysis)
occurs when an enzyme brings two reactants close together.
In solution, molecules move randomly and may not encounter one another in the correct orientation.
An enzyme solves this problem by binding the reactants in close proximity.
How it works:
Two reactants bind to the enzyme.
The enzyme brings them close together.
Their effective local concentration increases.
The molecules are positioned correctly.
The reaction occurs more rapidly.
Transition-state stabilization (physical mechanism of catalysis)
way for enzymes to lower activation energy.
Enzymes bind and stabilize the transition state through interactions like ,Hydrogen bonds, Ionic interactions, Electrostatic interactions, Van der Waals interactions.
How it works:
Substrate binds to the active site.
The reaction begins.
The substrate approaches the transition state.
The enzyme forms favourable interactions with the transition state.
The transition-state energy is lowered.
The reaction proceeds more easily toward products.
Important distinction:
Enzymes generally bind the transition state more favourably than the stable substrate.
If an enzyme bound the substrate too strongly without stabilizing the transition state, it could actually make the reaction harder.
Transition state analogs
molecules whose structures resemble presumed transition state.
– bind tightly to enzymes and are used as competitive inhibitors of substrates
What is induced fit in enzyme catalysis, and why is it important?
The conformational (shape) change that occurs in an enzyme when a substrate binds to its active site.
Key Functions / Importance:
Brings catalytic amino acids into the correct positions
Excludes water from the active site when necessary
Orients substrates correctly
Improves transition-state stabilization
Helps prevent unwanted side reactions
Role: A structural mechanism supporting both chemical and physical catalysis.
Diffusion-controlled reaction and triose phosphate isomerase importance
the enzyme is so efficient that substrate arrival becomes the limiting factor.
TIM catalyzes the reversible conversion of:
DHAP to G3P
TIM rapidly converts DHAP into G3P, allowing both three-carbon products to continue through glycolysis.
TIM is an extremely efficient enzyme, with its catalytic rate approaching diffusion-related limitations under appropriate conditions.
it has two ionizable active site residues.
Glutamate 165: acts as general acid-
base catalyst.
– Histidine 95: shuttles protons between oxygen atoms of enzyme- bound intermediate.
What would happen to the reaction if we started with protonated His-95 and have the side chain shifted between imidazolium cation and imidazole?
reaction would proceed faster cuz the cation is stronger acid than neutral
What makes triose phosphate isomerase quick?
quick proton shuttling via acid base catalysis
stable enediol intermediate (stabilized by active site interactions, lowering activation energy)
flexible lid loop closes upon binding, locking in the intermediate so it can’t diffuse out or break down into toxic byproducts
no rate limiting step
Superoxide dismutase (SOD) catalyzes reactions even faster than Triose
phosphate isomerase. How is this possible?
electrostatic guidance
positively charged amino acid residues (Arg, Lys) and Cu²+ ion surround the active site channel. these positive charges attract and funnel the negatively charged superoxide radical directly into the active site faster than random collision.
What are serine proteases?
enzymes that break peptide bonds in proteins using a serine residue in their active site.
Examples:
Trypsin.
Chymotrypsin.
Elastase.
They are called serine proteases because an important serine residue participates directly in catalysis.
Serine proteases contain three important amino acids:
Serine | Nucleophile that attacks peptide bond |
Histidine | Acts as a general acid/base |
Aspartate | Helps stabilize and orient histidine |
Why is the catalytic triad necessary?
Serine's hydroxyl group (-OH) is not normally reactive enough to attack a peptide bond efficiently.
Histidine helps remove the proton from serine.
Aspartate helps position and stabilize histidine, supporting its role as a base.
Together, these amino acids make serine a stronger nucleophile.
The reaction has two major phases:
Acylation.
Deacylation.
what kind of binding pocket would provide specificity towards these substrates (Chymotrypsin, trypsin, elastase)
chymotrypsin: cleaves aromatic residues like Phe, Tyr, Trp (has a deep wide hydrophobic pocket)
Trypsin: cleaves basic residues like Lys and Arg. Has a deep, narrow pocket containing a negatively charged aspartate residue at the bottom which forms a strong electrostatic interaction with the positively charged side chains of Lys and Arg
Elastase; cleaves small aliphatic residues like Ala, Gly, Val. Has a very shallow hydrophobic pocket. Two bulky amino acid side chains (Val and Thr) sit near the opening of the pocket, partially blocking it so only small uncharged side chains can fit inside.
Binding of substrate causes compress Asp102 and His57, i.e. they come closer to each other. Do you think this increase or decrease pKa of His57 in order to facilitate its indicated role?
increases pKa to make it more basic so it can act as base and abstract a proton from the hydroxyl group of Ser-195. This makes Ser-195 oxygen a stronger nucleophile, so it can attack the carbonyl carbon of the peptide substrate.
What type of catalytic reaction does chymotrypsin use?
acid base catalysis and covalent catalysis
What are the steps of acylation in a serine protease?
Substrate binds to the active site.
Histidine removes a proton from serine, activating it.
Serine attacks the substrate's carbonyl carbon.
A tetrahedral intermediate forms and is stabilized by the oxyanion hole.
The intermediate collapses, breaking the peptide bond.
The first product leaves, leaving the substrate fragment covalently attached to serine (acyl-enzyme intermediate).
What are the steps of deacylation in a serine protease?
Water enters the active site.
Histidine removes a proton from water, activating it.
The activated water attacks the acyl-enzyme intermediate.
A second tetrahedral intermediate forms and is stabilized by the oxyanion hole.
The intermediate collapses, breaking the bond between serine and the substrate fragment.
The second product leaves, and the enzyme is regenerated.
what is acylation and deacylation
addition or removal of an acyl group (R-Cdouble bond-O)
Acylation: Serine attacks → first product leaves → acyl-enzyme forms.
Deacylation: Water attacks → second product leaves → enzyme regenerated.
true or false:In living organisms, reactants at different steps of a
pathway are kept at relatively constant concentration because reactions in our body are at equilibrium.
False. Equilibrium means death (no net flow of energy or matter). Living organisms maintain a dynamic steady state (an open system where constant nutrient input and waste removal keep concentrations stable while allowing energy to flow continuously.)
linear pathways
series of reactions in one general direction. each reaction produces the substrate for the next reaction.
Example: Glycolysis
Glucose is converted through a series of ten reactions into pyruvate.
Cyclic pathways
A cyclic pathway begins with a molecule that is regenerated at the end of the cycle.
Example: Citric acid cycle (Krebs cycle)
Acetyl-CoA combines with oxaloacetate.
A series of reactions occurs.
Oxaloacetate is regenerated.
The cycle can continue as more acetyl-CoA enters.
Spiral pathways
A spiral pathway involves the same set of enzymes used repeatedly for lengthening or shortening a given molecule.
Example: Beta-oxidation
Fatty acids are broken down through repeated cycles.
Each cycle generally:
Oxidizes the fatty acid.
Hydrates the intermediate.
Oxidizes it again.
Cleaves it through thiolysis.
Each cycle removes a two-carbon unit as acetyl-CoA, while the fatty acid becomes shorter.
What is Gibbs free energy (ΔG) and what does it mean when positive and negative
Gibbs free energy describes the amount of energy available to do useful work at constant temperature and pressure.
The equation is:
ΔG = ΔH - TΔS
when positive the reaction is non spontaneous, when negative it is favourable and spontaneous
difference between ΔG vs ΔG°’
ΔG is the actual free energy change, depending on cellular condition.
ΔG°’ is the standard Gibbs free energy change under the biological standard rate.
•298°K (25°C)
• 1 atm pressure,
• Concentration of every reactant and
product is 1 M
• pH = 7.0
difference between Mass Action Ratio (Q) and the equilbrium constant (Keq)?
both equal [products]/[reactants] but Q uses current real time concentration and Keq uses equilibrium concentrations (a fixed constant when forward and reverse rates are equal)
how does comparing Q to Keq predict reaction direction
Q< Keq: moves forwards (ΔG<0)
Q=Keq: At equilibrium (ΔG = 0)
Q>Keq: Moves in reverse (ΔG>0)