1/48
Looks like no tags are added yet.
how to find density
mass/volume (g/mL) or (g/cm3)
ALWAYS REMEMBER
Units and Sig Figs
how to find percent composition of two elements when given densities - Element one
(Density you calculated - density of element one) / (density of element two - density of element one) x 100
how to find percent composition of two elements when given densities - Element two
100 - perecent comp. of element one
What happens when zinc reacts with HCL?
A chemical reaction occurs, producing hydrogen gas and zinc chloride. The equation is: Zn(s) + 2HCl (aq) —> ZnCl2(aq) + H2 (g).
when making a standard solution of 100mL …
mass of sugar will be equal to percent of sugar
how do you find the slope equation needed to determine percent of sugar in commercial beverages?
plot a graph of density versus sugar concentration in the 5 standard solutions you made that had different % sugar in it. (05,10,15,20%). equation will be generated.
using the equation you made, how do you find percent of sugar in commercial beverages?
y = mx+b - substitute the y value for the density of the beverage, then solve for x to find the sugar concentration. won’t need to multiply by 100. The result will give you the percent of sugar directly from the concentration.
If given fl oz, and grams of sugar or sodium or anything like that, how could you find percent sugar?
convert fl oz. to mL and then multiply that by the density of the beverage (probably will be given to you), this will give you grams of the beverage. divide given grams of sugar by grams of beverage and x 100.
how could you find percent sugar in a certain number of fluid ounces?
Convert fluid ounces to mL, multiply by the density to find total grams, then multiply by the percent sugar you found (they’ll probably give it), but it should be in decimal place not percent, and then the percent will be given to you.
How do you know that colorings, flavorings and preservatives don’t have an effect on the density of beverages?
We knew this because Diet Coke had a roughly equal density to the density of water, and since they both have 0% sugar but Diet Coke has artificial flavors and coloring, this confirms that since it didn’t have a higher density. But the sugar beverages did have a higher density, BECAUSE of the sugar.
how do you get the iron filings out of the mixture?
magnet in a plastic bag, weigh the bag first, add a magnet, take out all iron fillings from the mixture, invert bag and weigh, subtract bag weight ti find mass of fillings.
how to remove NaCL from the mixture?
dissolve in water since it is soluable, and then vacuum filter out the other components to isolate the NaCl solution. Then boil the solution to evaporate water and leave behind salt.
how to separate SiO2 and CaCO3?
And HCl to the solid mixture, making calcium chloride, vacuum filter the SiO2 out of the mixture since it won’t dissolve in this and still be a solid leftover. The hydrochloric acid reacts with calcium carbonate to produce calcium chloride, water, and carbon dioxide, while silicon dioxide remains undissolved.
How do you find the mass of the CaCO3?
You shouldve weighed the whole mixture before separating it. Add up the masses of all other components you recorded, and the subtract that from the mass of mixture to find CaCO3 mass.
How to find mass percent of a component of a mixture?
mass of component (g) / mass of mixture (g) x 100 = mass percent
How to determine percent composition of an element in a mixture
Set up like dimensional analysis - (Molar mass of element/mass of compound its in (frorm the mixture)) x (mass of compound you got/ mass of mixture you recorded) x 100 = percent composition
How could you modify the experiment to also isolate Sodium Bicarbonate (NaHCO3)?
After geting iron fillings out, add water still, this will dissolve both NaCl and NaHCO3, filter out leftover solids like normal, these can be isolated with the same steps. To separate the two compounds in the solution, place it in an ice bath. Sodium Bicarbonate will crystalzie since it is not soluable in cold water, then filter it out. Isolate NaCl in the same way as before.
converting mass to moles - grams
Dimensional analysis: (Mass you got x (1 mol/ Molar mass of the substance)} = moles of substance
converting volume to moles - mL
Use equamtion M = mol/L, you will be given the solutions concentraton (M) and then convert mL to L and solve for mol.
how to find theoretical yeild from moles of an atom
Dimensional analysis set up - You need to find limiting reactant (element or compound with least moles) - (Moles of limiting reactant x (moles of element in product/moles of product) x (Molar mass of product/1 mol of product)
How to find percent yield
Actual yeild/ theoretical yeild x 100 = percent yeild
How could you confirm sulfate is in Alum?
Perform a sulfate test using barium chloride; a white precipitate of barium sulfate confirms the presence of sulfate ions. Ba (2+) + SO4 (2-) → BaSO4 (s)
Calculate mass of sample of alum when placed in oven
find mass of water since it wll evaporate, then subtract from the initial mass of the alum sample to determine the amount lost during heating.
Dimensional analysis: (grams of alum given x ( 1 mol alum/molar mass of alum) x (12 mol H20/ 1 mol alum) x (molar mass of water/1 mol) = mass of h20
how do you calculate final concentration (M) from given mL and concentration value of a compound?
comvert mL to L and then x by concentration value of compound.
how can you determine absorbance of a solution
by using a spectrophotometer that measures the intensity of light passing through the solution, comparing the intensity of light before and after it exits the sample.
After finding concentration and absorbance of solutions, how could you use this to find concentration of lake water or a substance with an unknown amount of phosphate?
make a graph relating concentration and absorbance and use the equation (y=mx+b) given to you. you can find out the absorbance of the substance also with the spectrophotometer. Plug in absorbance for Y and then solve for concentration (X) using the linear equation.
you are given concentration (M) and mL, how can you find grams?
convert mL to L, 2. multiply by concentration value to find moles 3) multiply by molar mass to get grams.
calculate grams of (blank) removed when treated - given is volums and concentration of (blank)
covert mL to L 2. using concentration of (blank) and L multiply these to find moles 3. multiply by molar mass to get grams removed. 4. then subtract this from grams total (either given or calculated from euquation in last slide).
what is a hydrated compound?
A hydrated compound is a substance that contains water molecules within its crystalline structure. These water molecules are often chemically bound to the compound and can influence its physical and chemical properties.
What is the law of conservation of mass?
The law of conservation of mass states that in a closed system, matter cannot be created or destroyed, only transformed from one form to another. This principle is fundamental in chemical reactions, where the total mass of reactants equals the total mass of products.
Reaction 1 in the copper cycle
Redox - Cu(s) + 4HNO3(aq) → 2H20(l) + 2NO2(g) + Cu(NO3)2 (aq)
Reaction 2 in the copper cycle
Precipitate/double displacement - Cu(NO3)2(aq) + 2NaOH → Cu(OH)2(s) + 2NaNO3(aq)
Reaction 3 in the copper cycle
Decomposition - Cu(OH)2(s) → CuO(s) + H2O(l)
Reaction 4 in the copper cycle
Double Displacement reaction - CuO(s) + H2SO4 (aq) → H2O(l) + CuSO4(aq)
Reaction 5a in the copper cycle
Single displacement - CuSO4(aq) + Zn(s) → ZnSO4(aq) + Cu(s)
Reaction 5b in the copper cycle
single displacement - Zn(s) + 2HCl(aq) → ZnCl2(aq) + H2(g)
% deviation formula - to find the percent elements that remained unreacted when forming a compound.
((mass of element 1 consumed + mass of element 2 consumed) - mass of compound produced ) / mass of compound produced - all x 100
how to find moles of element consumed
divide mass of element consumed by molar mass of the element
how to find empirical formula
first determine limiting and excess reactant. then divide moles of excess by moles of limiting to find ration, get the number to a whole number or like 2.99 (which would be three) and multiply each number by same amount until each number is a whole number.
theoretical mass percent
find molar mass of compound, then divide each element’s molar mass by molar mass of compound and then x 100. MAKE SURE TO LOOK AT MOLE NUMBER (if two moles in the compound, x molar mass by two).
what is the oxidation state of Zn in Zinc Iodine?
+2
When ZnI2 is put in contant with a battery, what reaction happens in the cathode ray side?
Zn(2+) (aq) + 2e- → Zn(s)
When ZnI2 is put in contant with a battery, what reaction happens in the anode ray side?
2I- (aq) → I2 (aq) + 2e -
more calories means…
more energy produced
what types of macronutrients have the most calories?
fats compared to proteins and carbs have the highest caloric content.
how do you find heat gained by water in the calorimetry experiment?
use the equation q (heat) = m x c x change in temp. C or specific heat of water is 4.184 j/g x ºc and then mass and temperature change would be given or you would find by weighing and then subtracting initial temp from final temp.
how would you calculate energy produced by buring a food sample in calorimetry
set up dimensional analysis: (heat gained by water in J) / ((4.184 Jg x ºC) x 1000 ) = kCal, then divide this by mass of food consumed to get kcal/g.
how can you find thermal efficiency?
(q of output/ q of input) output is the heat energy gained by the system and input is whats on the nutrition label both are in kcal/g. expressed as a percentage.