1/57
What does a represent in the linear cost function equation y=a+bX? A) Variable cost per unit B) Total predicted cost C) Fixed cost intercept D) Cost driver volume
Fixed cost intercept
In the linear cost function equation y = a + bX, what does the slope coefficient brepresent?
The variable cost per unit of the cost driver (X).
A salon has the electricity cost function y=100+0.25X, where X is hairdryer hours. If total monthly cost is 500 dollars, what is the variable cost component? A) 100 dollars B) 250 dollars C) 400 dollars D) 500 dollars (hint for explanation)
400 dollars.
What is a mixed cost (or semi-fixed cost)?
A cost that contains both a fixed component (incurred regardless of activity) and a variable component (varying with activity volume).
How does moving from a one-month to a five-year planning horizon typically affect cost classifications? A) A higher percentage of costs are classified as fixed B) A higher percentage of costs are classified as variable C) Costs become unclassifiable D) The relevant range shrinks to zero
A higher percentage of costs are classified as variable.
If the cost object changes from 'Product Line A' to 'the entire factory', how does the classification of the factory manager's fixed salary change?
It changes from an indirect fixed cost (relative to Product Line A) to a direct fixed cost (relative to the entire factory).
Why do management accountants widely use linear cost functions y=a+bX even when actual costs display efficiency curvature? A) Linear functions capture economies of scale in a B) Linear approximations are sufficiently accurate within the relevant range C) Linear functions are mathematically exact D) Linear models eliminate residual errors
B) Linear approximations are sufficiently accurate within the relevant range.
What is the relevant range in management accounting?
The band or range of normal activity volume in which the specific relationship between cost level and cost driver remains linear and predictable.
A model built on historical output between 2,000 and 6,000 units is used to budget for 11,000 units. What is the primary problem? A) High multicollinearity B) Low sample size C) Prediction outside the relevant range D) Failure of R2
C) Prediction outside the relevant range, meaning the estimated linear parameters may no longer hold at 11,000 units.
What defines a step fixed-cost function?
A cost function where total cost remains constant over wide ranges of activity, but jumps discretely to a higher fixed level when activity exceeds specific thresholds.
A company rents storage containers holding 1,000 units each for 500 dollars per month. Producing 1,001 units requires renting a second container. This cost is a: A) Variable cost B) Step fixed cost C) Mixed cost D) Step variable cost
Step fixed cost
What distinguishes a step variable-cost function from a step fixed-cost function?
Step variable costs increase in small steps over narrow activity ranges, whereas step fixed costs remain constant over broad activity ranges before stepping up.
Which criterion establishes an economically plausible relationship between an activity driver and cost? A) High correlation alone B) A verified cause-and-effect relationship C) A large sample size D) A low intercept
A verified cause-and-effect relationship.
What three operational mechanisms can establish a cause-and-effect relationship between a cost driver and costs?
1) A physical relationship between inputs and outputs, 2) A contractual agreement, or 3) Knowledge of operations.
Why is economic plausibility critical when selecting a cost driver? A) It replaces quantitative analysis B) It gives managers confidence that the estimated relationship will hold repeatedly in future data C) It guarantees an R2 of 1.0 D) It sets the fixed cost to zero
It gives managers confidence that the estimated relationship will hold repeatedly in future data.
What are the four primary methods used to estimate cost functions?
1) Industrial Engineering Method, 2) Conference Method, 3) Account Analysis Method, and 4) Quantitative Analysis Method (e.g., Regression Analysis).
Which cost estimation method uses time-and-motion studies to evaluate physical input-output relationships? A) Account Analysis Method B) Industrial Engineering Method C) Conference Method D) High-Low Method
B) Industrial Engineering Method
What are the key strengths and weaknesses of the Industrial Engineering Method?
Strength: Very thorough and detailed when physical relationships exist. Weakness: Extremely costly and time-consuming.
What is the primary weakness of the Account Analysis Method? A) Requires complex software coding B) Relies heavily on qualitative judgments when classifying accounts as fixed, variable, or mixed C) Cannot estimate fixed costs D) Requires multi-year time-and-motion studies
Relies heavily on qualitative judgments when classifying accounts as fixed, variable, or mixed.
What is the main advantage of the Conference Method for cost estimation?
It allows rapid cost function estimation by gathering consensus across operational departments without requiring historical data.
What three criteria should be evaluated when selecting a cost driver? A) Speed, cost, and simplicity B) Economic plausibility, goodness of fit, and significance of the independent variable C) Sample size, range, and median D) Intercept, standard deviation, and variance
Economic plausibility, goodness of fit, and significance of the independent variable.
In simple linear regression, how is 'goodness of fit' evaluated?
By the coefficient of determination (R2), which measures the proportion of variance in total cost explained by the cost driver.
Why prefer adjusted R2 over plain R2 in multiple regression models? A) Plain R2 cannot be computed with multiple drivers B) Plain R2 always increases when adding drivers, whereas adjusted R2 penalizes uninformative drivers C) Adjusted R2 eliminates multicollinearity D) Plain R2 measures p-values
Plain R2 always increases when adding drivers, whereas adjusted R2 penalizes uninformative drivers.
In a multiple linear cost function y=a+b1X1+b2X2, what does coefficient b1 measure?
The ceteris paribus (all else equal) effect of driver X1 on cost y, holding driver X2 constant.
Model 1 (2 drivers) has R2=0.685 and adjusted R2=0.626. Model 2 (4 drivers) has R2=0.702 and adjusted R2=0.601. Which model should be preferred for budgeting? A) Model 2 because plain R2 is higher B) Model 1 because adjusted R2 is higher C) Model 2 because it has more drivers D) Neither model can be compared
Model 1 because adjusted R2 is higher
What does a cost driver's p-value (P>∣t∣) in regression output indicate?
The statistical probability that the estimated relationship between the cost driver and cost occurred purely by chance.
A regression driver has a p-value of 0.0001 and a slope coefficient of 0.002 dollars per unit. Average driver volume is 100 units annually in a 1,000,000 dollar pool. How is this driver evaluated? A) Highly significant and economically important B) Economically important but statistically insignificant C) Statistically significant but not economically important D) Insignificant and unimportant
C) Statistically significant but not economically important (total annual cost contribution is trivial at 0.002×100=0.20 dollars).
What is the difference between statistical significance and economic importance for a cost driver coefficient?
Statistical significance (p-value) tests whether a non-zero relationship exists beyond chance, while economic importance evaluates whether the total dollar contribution (b×X) is large enough to impact managerial decisions.
A driver coefficient b is estimated at 105.00 dollars with a 95% confidence interval of [28.45, 181.56]. If activity is reduced by 10 units, what is the expected range of cost savings? A) 105.00 to 1,050.00 dollars B) 284.50 to 1,815.60 dollars C) 28.45 to 181.56 dollars D) 1,050.00 to 2,845.00 dollars
284.50 to 1,815.60 dollars.
Given the regression cost line y=300.98+10.31X, calculate total predicted cost y when machine hours X=80.
1,125.78 dollars. Explanation: y=300.98+(10.31×80)=300.98+824.80=1,125.78 dollars.
A high correlation (R2=0.95,p<0.001) exists between umbrella sales and fleet delivery maintenance cost. Using umbrella sales as the fleet cost driver violates which criterion? A) Goodness of fit B) Economic plausibility C) Significance D) Linearity
Economic plausibility
What is multicollinearity in a multiple regression cost model?
A condition where two or more independent variables (cost drivers) are highly correlated with one another.
Which statistical metric directly signals severe multicollinearity in a multiple regression model? A) Adjusted R2<0.10 B) Variance Inflation Factor (VIF) above 5 to 10 C) Negative t-statistic D) Durbin-Watson statistic of 2.0
Variance Inflation Factor (VIF) above 5 to 10
When severe multicollinearity exists between two drivers (e.g., correlation of 0.94, VIF > 8), what output of the model remains reliable?
The overall model prediction of total departmental cost (y).
Why can total cost predictions remain valid even when severe multicollinearity produces an economically odd slope sign? A) Standard errors automatically correct negative signs B) Multicollinearity distorts individual slope attribution, not overall model prediction C) Negative signs indicate scale economies D) VIF reduces residual errors
Multicollinearity distorts individual slope attribution, not overall model prediction.
What is omitted variable bias in cost estimation?
Bias created when a key cost driver that significantly affects cost is omitted from the model, causing the included drivers to falsely absorb its effect.
How do volume quantity discounts affect a direct material cost function? A) They increase the fixed intercept a B) They cause slope coefficient b to decrease at higher purchase volume tiers C) They eliminate variable costs D) They create a step fixed cost
They cause slope coefficient b to decrease at higher purchase volume tiers.
In regression analysis, what is the 'residual term'?
The vertical difference between an actual observed cost data point and the cost predicted by the regression line (y−y^).
In the cost function formula y = a + bX, what is the dependent variable? A) X B) b C) a D) y
y
Within the relevant range, what happens to total fixed cost and fixed cost per unit as production increases?
Total fixed cost remains constant; fixed cost per unit decreases.
Within the relevant range, what happens to total variable cost and variable cost per unit as production increases? A) Total variable cost increases linearly; variable cost per unit remains constant B) Total variable cost remains constant; variable cost per unit increases C) Both decrease D) Both double
Total variable cost increases linearly; variable cost per unit remains constant.
Given the manufacturing cost function y=46,000+31X, calculate total cost for 5,000 units within the relevant range.
201,000 dollars. Explanation: y=46,000+(31×5,000)=46,000+155,000=201,000 dollars.
Which cost estimation method is also known as the work-measurement method? A) Account Analysis Method B) Conference Method C) Industrial Engineering Method D) High-Low Method
C) Industrial Engineering Method
What action should a manager take if two cost drivers in a model exhibit a VIF above 8?
Use operational and economic reasoning to select and keep one driver while dropping the redundant correlated driver.
In an OLS regression summary table, what does R2=0.685 mean? A) 68.5% of total cost variance is explained by the cost drivers B) Total fixed cost is 68.5% of budget C) 68.5% of data points fit exactly on the line D) The p-value is 0.685
68.5% of total cost variance is explained by the cost drivers.
Given a driver coefficient b=5,315.16 dollars per supplier, calculate the total expected cost reduction from reducing suppliers by 4.
21,260.64 dollars. Explanation: Cost reduction = 5,315.16×4=21,260.64 dollars.
A multiple regression has a high overall F-statistic (p<0.001) but high individual driver p-values. What is the likely cause? A) Homoscedasticity B) High multicollinearity among the drivers C) Prediction outside relevant range D) Zero intercept
High multicollinearity among the drivers.
What primary assumption do managers make about cost driver variations?
Variations in the level of activity (cost drivers) explain variations in total related costs.
Which of the following is an example of a physical cause-and-effect relationship? A) Negotiating a fixed annual facility lease B) Producing more snowboards requiring more plastic materials C) Classifying accounting software license fees D) Correlation between weather and fleet maintenance
Producing more snowboards requiring more plastic materials.
Why are the four cost estimation methods not mutually exclusive?
Organizations frequently combine methods (e.g., combining account analysis with regression analysis or conference consensus) to refine cost function estimates.
If a cost driver's slope coefficient is b=105.00 dollars with a confidence interval of [28.45, 181.56], what is the point estimate savings for cutting 5 units? A) 142.25 dollars B) 525.00 dollars C) 907.80 dollars D) 1,050.00 dollars
525.00 dollars.
How does a large condition number (e.g., 2.61×108) in regression diagnostic notes interpret?
It indicates potential numerical instability caused by severe multicollinearity among independent variables.
Which estimation method relies on cross-functional management estimates without historical cost data? A) Regression Analysis B) Industrial Engineering C) Conference Method D) High-Low Method
Conference Method
What is the key takeaway when evaluating a driver's statistical significance versus its economic importance?
A driver can be highly statistically significant (p<0.001), but if its unit cost impact (b) or volume (X) is tiny, it lacks economic importance for decision-making.
What occurs when a linear model is fitted across a step fixed-cost function? A) Cost is overestimated across all activity levels B) The linear model approximates average cost within the relevant range but misstates costs at step boundaries C) Step costs become pure variable costs D) Plain R2 becomes 1.0
The linear model approximates average cost within the relevant range but misstates costs at step boundaries.
Given a driver coefficient b=31 dollars per unit, calculate the contribution of 200 units to total manufacturing cost.
6,200 dollars (31×200).
Which condition makes a cost object classification change salary from indirect to direct? A) Shrinking the time horizon B) Expanding the cost object boundary to encompass the manager's whole area of oversight C) Increasing production D) Switching to industrial engineering
Expanding the cost object boundary to encompass the manager's whole area of oversight.
How does increasing sample size n in regression analysis affect coefficient confidence intervals?
It narrows the confidence intervals, increasing estimation precision.