1/94
Section 1
[section] Authority
Section 2
[section] Statement of Policies
Section 3
[section] Statement of Objectives
Section 4
[section] Definition of Terms
Bureau of Food and Drugs (BFAD)
The _____ hereby adopts the 1st edition of Current Good Manufacturing Practice Guidelines and the specific GMP guidelines hereunder prescribed.
RA 3720
Section 1. Authority
This order is issued under the authority conferred upon the Secretary of Health by virtue of section 26(a) of _____ as amended.
License to Operate (LTO)
Unang hinahanap kasi it means nagcomply ‘yung company sa lahat ng reqs set by the govt
Drugs
Section 2. Statement of Policies
_____ shall be manufactured using methods, facilities and control procedures adequate to preserve their identity, strength, quality and purity.
License
Section 2. Statement of Policies
_____ to manufacture drugs shall be issued only upon compliance with Current Good Manufacturing Practice guidelines.
Overall control
Section 2. Statement of Policies
_____ is essential to ensure the manufacture of drugs conforming officially recognized standards of quality, efficacy and safety.
qualities
Section 2. Statement of Policies
The _____ of drug products depend on the starting materials, production, quality control processes, building, equipment, and personnel involved and testing protocols.
Accuracy
The nearest value obtained during measurement or analysis to the true value.
Actual Yield
The quantity that is actually produced at any phase of production of a particular drug product based on the initial input.
Airlock
An enclosed space with two or more doors, which is interposed between two or more rooms.
pass through hatch
An airlock may be designed for and used by either people or materials; in the latter case it can be termed a _____.
anteroom
An airlock can also be the _____ to a clean room in which sterile goods are handled.
Approved Supplier
A supplier of all components of finished products generally approved for use by the trade and accredited by the manufacturer based on a vendor rating which include but not limited to conformance to the company or compendium material specifications.
Batch
A quantity of drug product/device that is homogenous in character and quality produced during a given cycle of manufacture and from a specific manufacturing order.
Batch Number
A designation in numbers or letters or combination thereof that identifies the batch, and permits the tracing of the complete history of a batch, including all stages of its production, control and distribution.
Biogenerator
A contained system, such as a fermenter, into which biological agents are introduced together with other materials in order to effect their multiplication or their production of other substances by reaction with other materials. Biogenerators are generally equipped with devices for regulation, control connection, material addition and material withdrawal.
Microbiological Agents
Include genetically engineered microorganisms, cell cultures, as well as endoparasites, whether pathogenic or not.
Blood
Whole blood collected from a single donor and processed either for transfusion or further manufacturing.
Bulk Product
Any processed material which has to undergo another process including packaging operation to become a finished product.
Calibration
The operations carried out to determine the accuracy of measuring instruments, of “material measures” such as masses or gauges and of measurement standards.
Cell Bank System
A system whereby successive batches of a product manufactured by culture in cells derived from the same master cell bank (see Master Cell Bank).
cell bank system
The _____ is validated for a passage level or number of population doubling beyond that which was achieved during routine production.
Cell Culture
The in-vitro growing of cells isolated from multicellular organisms.
Clean Area
An area with defined environmental control of particulate and microbial contamination, constructed and used in such a way as to minimize the introduction, generation and retention of contaminants within the area.
Compatibility Testing
The in-vitro serological tests performed on donor and recipient blood samples to establish the serological matching of a donor’s blood or blood components with that of a potential recipient.
Component
Any material intended to be used for the manufacture of a product whether raw or packaging materials.
Contained Area
An area constructed, operated and equipped with air-handling and filtration system in order to prevent contamination of the external environment by biological agents from within the area.
Contaminants
Anything that cause contamination to the product.
Controlled Area
An area constructed and operated to control the introduction of potential contamination (an air supply approximately class III may be appropriate), and the consequences of accidental release of living organisms. The level of control exercise shall reflect the nature of the organism employed in the process.
negative
The controlled area shall be maintained at a pressure _____ to the immediate external environment and allow for the efficient removal of small quantities of airborne contaminants.
Cross Contamination
Contaminations of a starting, intermediate product or finished product.
Cryogenic Vessel
A container designed to store liquefied gas at extremely low temperature.
Cylinder
A container designed to store gas at a high pressure.
Date of Manufacture
The date indicating the start of processing of every batch.
Dispensing
The activity of weighing, counting or measuring and checking of starting materials and issuing these to the appropriate production personnel; details of the activity being duly and properly documented.
Documentation
Written recording of all procedures, instructions and processes involved in the manufacture of drug products.
Drug Product
Any substance or mixture of substances in finished dosage forms that is manufactured, offered for sale, or presented for use in
(1) the treatment, mitigation, cure, prevention, or diagnosis of disease, abnormal physical state, or the symptoms thereof in man or animal; or
(2) the restoration, correction or modification of organic functions in man or animal; regardless of whether it is in package form.
Device
Instrument, apparatus, or contrivances, including their components, parts and accessories, intended
(1) for use in the diagnosis, cure, mitigation, or prevention of disease in man and animals; or
(2) to affect the structure or any function of the body of man or animal.
Expiration Date
A date fixed for each individual batch on or before which the batch is expected to meet the standard specifications for quality, safety and efficacy.
Facilities (for blood products)
Any area used for the collection, processing, compatibility testing, storage or distribution of blood and blood components.
Facilities (for other products)
This refers to the building, premises and equipment necessary in the manufacture of drugs.
Finished Product
A product which has undergone all stages of manufacturing operations.
Good Manufacturing Practice (GMP)
It is the system of quality assurance aimed at ensuring that products are consistently manufactured to a quality appropriate for their intended use. It is thus concerned
Infected (man/animal)
Contaminated with extraneous biological agents and therefore capable of spreading infection.
In-Process Control (sometimes IPQC)
Checks and tests instituted and carried out in the course of the manufacture of a drug to assure identity, strength, quality and purity.
Intermediate Product
Any processed substance or mixture of substances which has to undergo one or more further stages of processing to become finished product.
Leukopheresis
The process in which blood is extracted from the donor, a leukocyte concentrate is separated, and the remaining formed elements and residual plasma are returned to the donor.
Liquefied Gases
Gases that, at the specified temperature and pressure, remain as a liquid in the cylinder.
Lot
A batch or any portion of batch produced by a continuos process, an amount of drugs produced in a unit of time or quantity in a manner that assures its uniformity and in either case which is identified by a distinctive lot number and has uniform character and quality within specified limits.
Lot Number
See batch number
Manifold
Equipment or apparatus designed to enable one or more gas containers to be filled simultaneously from the same source.
Manufacture or Manufacturing
The complete set of activities to produce a drug that comprise production and quality control from dispensing of materials to the release for distribution of the finished product.
Master Cell Bank
A culture of fully characterized cells filled into containers in a single operation, processed together and stored to ensure uniformity and stability.-
-70 deg C or lower
A master cell bank is normally stored at _____.
Master Seed Lot
A culture of a microorganism distributed from a single bulk into containers in a single operation to ensure uniformity, stability and to prevent contamination.
Packaging
The process of packing which is that part of the production cycle applied to a bulk product to obtain the finished product.
Packaging Material
Any material used in the packaging of a bulk product to obtain the finished product.
Plasma (for further manufacture)
The liquid portion of blood separated and used as material to prepare another product.
Plasmapheresis
The process in which blood is extracted from the donor, the plasma is separated from the formed elements and at least the red blood cells are returned to the donor.
Plateletpheresis
The process in which blood is extracted from the donor, the platelet concentrate is separated, and the remaining formed elements and residual plasma are returned to the donor.
Precision (in analytical assay and method)
The degree of variation between individual test results when the method is used separately to different samples drawn from the same batch of material. This will include variation between analysts, between days, between tests on the same prepared extract of a given sample, between different extracts and between laboratories conducting the same test.
Repeatability (within lab)
Reproducibility (between labs)
Precision is normally divided into two types:
Primary Containment
A system of containment that prevents the dispersal of a biological agent into the immediate working environment. It involves the employment of closed containers or safety biological cabinets accompanied with secure operating procedures.
Procedures
Description of the operations to be executed, the precautions to be implemented directly or indirectly related to the manufacture of a drug.
Processing
The part of production cycle starting from weighing of raw materials to finished product.
Processing of Blood
Any process employed after collection and before computability testing of blood. It includes the identification of a unit of donor blood, the preparation of components from such unit of donor blood, serological testing, labeling and associated record keeping.
Production
All operations starting from dispensing of materials to processing, packaging, to finished product.
Quality Control
All control measures taken designed to ensure that finished products consistently conform to established specification of identity, strength, purity and quality.
Quarantine
An act of holding off a material for use, or a product for packaging or distribution by physically setting it apart or by system duly validated, pending a decision on release or rejection.
Raw Material
All substances whether active or excipients that are employed in the processing of a finished product.
Reconciliation
Also synonymous to %wastage. A resolution between the theoretical and actual yield.
Recovery
The incorporation of all or part of previous batches with the required quality into another batch at a defined step of production.
Rejected
The status of materials or products which are not permitted to be used for processing, packaging or distribution.
Released or Passed
The status of materials or products which are permitted to be used for processing, packaging or distribution.
Representative Sample (n)
A sample representing the lot, the batch, or the total amount of materials based on a sampling plan.
sqrt(N) + 1
where N = batch size
formula for Representative Sample (n)
Reprocessing
The reworking of all or part of a batch of product of an unacceptable quality from a defined step of production in order that its quality may be rendered acceptable by one or more additional operations.
Returned Product
Any finished product which is already in distribution and sent back to the manufacturer or distributor due to complaint, damage, expiration, validity or other reasons such as the condition of the container or package which may cast doubt on the product identity, quality, strength and safety.
Sanitation
All measures taken to assure suitable or adequate environmental conditions in compliance to GMP.
Secondary Containment
Secondary containment is a system of containment that prevents the dispersal of a biological agent into the external environment or into other working areas. It involves the use of rooms with specially designed air handling, the existence of air locks and/or sterilizers for the exit of material. It may add to the effectiveness of primary containment (see Primary Containment).
Seed Lot System
A seed lot system is a system where successive batches of product are derived from the same master seed lot at a given passage level.
Specification of [Raw] Material
A description of starting material, intermediate, bulk or finished product in terms of its chemical, physical and microbiological characteristics, if any. A specification shall include descriptive and or numerical clauses stating standards and tolerated deviations, whenever applicable.
Starting Materials
Raw materials used in the production of a finished product (drugs).
Sterile Room or Sterile Area
A room or area of defined environmental condition with controlled particulate and microbial contamination, constructed, equipped and used to eliminate the introduction, generation or retention of contaminants.
Sterilization
Inactivation or reduction to an acceptable level of all viable microorganisms by a suitable process.
Theoretical Yield
The quantity that is expected or planned to be obtained at any phase of production of a particular product, based on the quantity of components to be used.
Unit (of Blood)
The volume of blood or one of its components in a suitable volume of anticoagulant obtained from a single collection of blood.
Validation
The process of confirming by recognized appropriate means or manner, that any material, process, procedure, activity, system, equipment or mechanics used in production and control consistently achieved the desired results.
Working Cell Bank
A culture of cell derived from the master cell bank and intended for use in the preparation of production of cell cultures and normally stored at - 70 deg C or lower.
Working Seed Lot
A culture of microorganism derived from the master seed lot and intended for use in production.
Worst Case
A condition or set of conditions encompassing upper and lower processing limits and circumstances, within standard operating procedures, which pose the greatest chance of product or process failure when, compared to ideal conditions. Such conditions do not necessarily induce product or process failure.