1/61
Looks like no tags are added yet.
Service Entrance
The portion of the supply conductors extending from the street main duct or transformer to the service or switchboard of the building supply; defined by the National Electrical Code (NEC) as the conductor and equipment for delivering energy from the electricity supply system to the wiring system of the premises served
Types of Service Entrance
Overhead Service and Underground Service
Overhead Service Entrance
The common type of service wire installed by electric power supply companies for industrial, commercial, and residential houses, where a service drop connects from the nearest utility pole to the building service entrance point, entering through the weather head down to the electric power meter
Underground Service Entrance
A service entrance consisting of a raceway (conduit) extending from the building to the property line where it is tapped to the main, utilizing service laterals buried underground
Service Point
The point that defines the boundary of responsibilities between the utility provider (from the utility pole to the service entrance equipment) and the customer (from the service entrance equipment to the house/structure)
Service Entrance Equipment
Equipment that receives the service entrance conductors and includes a method of measuring power (metering equipment), a method of cutting off power (main disconnect or switch gear), and overcurrent protection devices (circuit breakers or fuses) that protect the service entrance conductors
Electric Meter
An instrument used by the utility company to measure and record electrical energy consumed
Switchboard
An assembly containing one or more devices that can be used to disconnect a circuit manually and automatically from its power source
Panel Board
A cabinet or cutout enclosure placed in or against a wall or partition that is accessible from the front, also referred to in the trade as a power panel, load center, distribution center, or main power panel
Transformers
Devices used in transmitting and distributing power from the power plant to a substation, classified as step-up or step-down, single-phase or three-phase, and pole mounted or pad mounted
Step-Down Transformer
A transformer with a secondary voltage that is less than its primary voltage, typically used in buildings to reduce building system voltages to usable levels
Step-Up Transformer
A transformer with a secondary voltage that is greater than its primary voltage, increasing the voltage applied to it
Single-Phase Transformer
A transformer that has a single primary winding and a single secondary winding
Three-Phase Transformer
A transformer that has three primary windings and three secondary windings
Pole Mounted Transformer
A transformer mounted overhead on a distribution pole, usually single-phase or three single-phase units for a three-phase configuration
Pad Mounted Transformer
A transformer designed to be mounted on concrete pads and usually three-phase
Overcurrent Protection (OCP) Device
A device that safeguards the building service or an individual circuit from excessive current flows and protects circuit components from severe overheating caused by dangerous temperature rises in conductors
Circuit Breaker
An overcurrent protection device that acts as a manual switch and automatically trips off to open the circuit when current flowing through it exceeds the circuit rating
Fuse
An overcurrent protection device consisting of a metal strip with a low melting temperature that heats up, melts, and opens the circuit to interrupt current flow when its current rating is exceeded
Utilization Equipment
A broad category of electrical or electronic machine or instrument designed to perform a specific mechanical, chemical, heating, or lighting function through the use of electrical energy (such as electric motors, air conditioning, refrigeration, heating units, industrial machinery, cranes, elevators, and escalators)
Appliance
An end-use piece of utilization equipment designed to perform a specific function such as cooking, cleaning, cooling, or heating
Fixed Appliances
Permanently attached appliance installations, such as a built-in electric cooktop or oven
Stationary Appliances
Appliances situated and used at a specific location that can be moved to another outlet, such as a refrigerator, clothes washer, or clothes dryer
Portable Appliances
Appliances that can be easily carried or moved, such as a hair dryer or toaster
Electrical Device
A component in an electrical system designed to carry but not use electricity, such as switches, receptacles, and relays
Outlet
The location in a branch circuit where electricity is used, such as a lighting outlet providing power to a light fixture
Receptacle
A female connecting device with slotted contacts installed at an outlet or on equipment to easily establish an electrical connection with an inserted plug
Plug
A male connecting device with two or more prongs, typically attached to a flexible cord, that is inserted into a receptacle to connect an appliance, light, or equipment to an electrical circuit
Switch
A device placed between two or more electrical conductors in a circuit to safely and intentionally open or close the circuit or redirect the path of current
Electrical Conductor
Any material that conducts electrical current, such as a wire, typically classified by wire gauge standard and cross-sectional area in circular mils
Bus Bar
An electrical conductor (usually copper or aluminum) shaped as a flat strip or hollow tube to dissipate heat efficiently, serving as a common connection for two or more electrical circuits
THHN
Thermoplastic High Heat resistant Nylon coated wire insulation
THWN
Thermoplastic Heat and Moisture resistant Nylon coated wire insulation
THW
Thermoplastic Heat and Moisture resistant wire insulation
TW
Thermoplastic Moisture resistant wire insulation
Insulation Designation A
Glass fiber or similar insulation material (formerly asbestos, which is obsolete)
Insulation Designation FEP
Fluorinated ethylene propylene insulation
Insulation Designation L
Lead sheathed insulation
Insulation Designation N
Nylon jacketed (coated) insulation
Insulation Designation PF
Perfluoroalkoxy insulation
Insulation Designation R
Thermoset insulation, such as rubber or synthetic rubber
Insulation Designation S
Silicone (thermoset) insulation
Insulation Designation T
Thermoplastic insulation
Insulation Designation X
Cross-linked synthetic polymer (plastic) insulation
Insulation Designation Z
Modified tetrafluoroethylene insulation rated at 194∘F (90∘C) for wet or dry environments
Insulation Designation H
Heat resistant insulation rated at 167∘F (75∘C); lack of "H" indicates a 140∘F (60∘C) rating
Insulation Designation HH
Extra heat resistant (high heat) insulation rated at 194∘F (90∘C)
Insulation Designation W
Moisture resistant insulation; lack of "W" indicates no moisture resistance
Cable
A factory assembly containing more than one conductor bundled together inside a protective outer sheathing to simplify the installation of multiple wiring (such as NM, AC, UF, SE, and SER cables)
Cords
Stranded conductors within a flexible insulated sheathing material, designed to be bent and twisted without stressing the conductors
Enclosures
Electrical boxes and cabinets made of metal (steel, galvanized steel, aluminum) or nonmetallic (plastic) materials that protect conductors, connections, controls, and other electrical equipment
Electrical Boxes
Metal or nonmetallic (plastic) enclosures available in four primary shapes (square, rectangular, octagonal, and round) that hold devices like switches or outlets and safely permit wiring connections
Junction Boxes (J-Boxes)
A special type of electrical box used to enclose conductor connections (junctions)
Pull Box
A type of junction box that allows access to a raceway for snaking conductors through the raceway
Raceway
An enclosed channel such as a conduit, tube, or gutter designed for holding wires, cables, or busbars
Rigid Metal Conduit (RMC)
A heavy galvanized steel or aluminum tube with threaded connections that can be used in contact with earth and embedded in concrete
Intermediate Metal Conduit (IMC)
A galvanized steel or aluminum tube with a thinner wall than RMC, joined with threaded connections or threadless connectors/couplings, suitable for earth contact and concrete embedment
Electrical Metallic Tubing (EMT)
A thin-walled galvanized steel or aluminum tube (up to 4 inches nominal diameter) that cannot be threaded and is joined using threadless compression, crimped, or set-screw couplings and fittings
Electrical Nonmetallic Tubing (ENT)
A flame-retardant, semiflexible corrugated plastic tube that can be bent by hand, must be used behind fire-rated finish materials, is permitted in damp locations, and can be set in concrete above ground
Rigid Nonmetallic (PVC) Conduit
A thin-walled pipe made of polyvinyl chloride that is joined using solvent-welded fittings
Flexible Metal Conduit (FMC)
A flexible metallic raceway similar to armored cable that is installed empty so wiring can be pulled through it
Liquid Tight Flexible Metal Conduit (LFMC)
A flexible metal conduit covered with a sunlight-resistant, watertight plastic jacket and used with special watertight connectors