1/94
Looks like no tags are added yet.
Geomorphology
The study of Earth’s landforms
How the earth is shaped falls under the umbrella of geomorphology as a discipline
Endogenic System
A system where things are formed or occurring beneath the surface of the Earth.
The place where it gets its energy from is within the Earth, so through the radioactive decay of elements, you get tectonic processes
Exogenic System
A system where things are formed or occurring on the surface of the Earth, powered by solar energy and the influence of gravity
The processes at work in the Exogenic system are the gradational processes
Tectonic Processes
The processes that derive their energy from within the Earth and serve to create landforms
Through the radioactive decay of elements, there is a source of energy, and that energy serves to create landforms through sharpening, elevating, rupturing, and moving the Earth’s surface
This results in fractures in the Earth’s crust, mountain building, earthquakes, and volcanoes
Gradational Processes
The processes that derive their energy from solar energy and the influence of gravity and serve to wear down high relief and fill in low areas to level the landscape through weathering, erosion, transportation, and deposition
If tectonic processes work to build things up, gradational processes work to wear things down and fill things in
The Gradational processes use four gradational agents: (They’re really just air and water but separated out into 4 agents)
Running water
Waves and currents
Moving ice
Wind
Gradational (Mobile) Agents
4 natural forces that work to perform gradational processes:
Running water (EX: Streams, rivers, water that flows over the land)
Waves and currents (of oceans)
Moving ice (EX: Yosemite’s canyons are caused by moving glaciers)
Wind (EX: Sand dunes)
The gradational agents are really just air and water but separated into four agents
Geologic Time Scale
A summary timeline of all of Earth’s history going back billions of years (Earth’s history is more than 4.6 billion years old)
It’s broken up into unit of time measurements that include:
Eons
Eras
Periods
Epochs
The order goes:
PreCambrian,
Phanerozoic Eon,
Cenozoic Era,
Quaternary Period,
Pleistocene Epoch, Holocene Epoch, Anthropocene Epoch
PreCambrian Era
The largest chunk of Earth’s history—over 88%
There’s not much that we know about it. It’s before our modern atmosphere developed and in terms of life—there were only things like single cell organisms
There were organism that started to put oxygen into our atmosphere
Phanerozoic Eon
At the end of the PreCambrian, there was the “Eon of Life.”
This accounts for less than 12% and started about 542 million years ago
We are currently in this eon
Cenozoic Era
This is the era we currently live in
It includes the last 65 million years
Quarternary Period
We are currently in the Quarternary Period and it has two official epochs:
The Pleistocene
The Holocene
Pleistocene Epoch
This was the last Ice Age and ended about 10 to 12,000 years ago
Holocene Epoch
We are currently in the Holocene Epoch of the Quarternary Period
Anthropocene Epoch
An unofficial epoch some scientists insist should be the case because we have entered such a new age where humans dominate the earth
The question is when did we transition into the Anthropocene?
Some say the Agricultural Revolution, others say the Industrial Revolution or Nuclear Age
Geomorphology — Formation of the Earth
There were two camps that many earth scientists fell into when it came to theories about the way the Earth had been formed:
Catastrophism
Uniformitarianism
In reality, the formation of earth’s landforms is really a combination of these two ideas
Seismic waves
Waves of energy that are transmitted through the earth and along its surface because of movement along a fault or nuclear explosion
Seismic waves is how we know about the different layers of the earth
Seismic waves come in a couple different categories whether they move through the earth or on the surface:
Body waves
Surface waves
Fault
A crack or fracture in the Earth’s crust where slippage (movement) occurs
The movement along this crack or fracture can send shockwaves that we feel as an earthquake
Usually, faults are at an angle
Along the fault, the area that has the original movement or slippage is referred to as the focus
Focus
The point within the earth where the original slippage (movement) occurs
Epicenter
The exact place on the surface of the earth directly above the focus that humans can use to describe the location of an earthquake
Seismograph
An instrument used to record and report seismic waves
Seismogram
The record of seismic activity measured by a seismograph (recorded on a sheet of paper)
Body Waves
Waves that move through the surface of the Earth
There are two types of body waves;
Primary Wave (P-wave)
Secondary Wave (S-wave)
Surface Waves
Waves that move along the surface of the Earth
There are two types of Surface Waves:
Love Wave
Rayleigh Wave
Primary Wave (P-wave)
Travels the fastest
The first body wave to reach a seismic station
Transmits through all types of material
Speeds up when passing through denser material/slows down in less dense material
Refracted when going through different types of materials
Secondary Wave (S-wave)
Slower
Detected second
Does not transmit through liquid material (EX: molten rock or water)
Love Wave
(Named after a scientist, not romance)
Moves horizontally and perpendicular to the direction of the wave
This creates the shaking back and forth effect
Rayleigh Wave
Movement has a rolling effect
This creates the up and down motion
Earthquake
The sudden shaking of Earth’s surface caused by a release of energy in the planet’s lithosphere, which sends out seismic waves
Major earthquake: A big earthquake
Aftershocks
An earthquake/series of earthquakes that occurs after a major earthquake along the same fault system as a result of the settling of Earth’s crust
As the Earth moves along this fault, it settles into its new position and as it does, it moves and sends off a smaller series of earthquakes
Foreshocks
Smaller earthquakes that precede (come before) a major earthquake along the same fault system
You won’t know if they are foreshocks until after the major earthquake has occurred
Layers of the Earth
The earth is 4,000 miles from its crust to the surface
There are four layers of earth:
Crust
Mantle
Outer Core
Inner Core
Crust
The crust extends from about 5 miles to 25 miles depending on the type of crust
There are two types of crust:
Continental crust
Oceanic crust
Due to the different densities of the crusts, when the plates move, the crusts will do different things
Air temperature goes up to 1,600°F
The crust is a part of the lithosphere
Mantle
Extends about 1,800 miles between the crust and the core—it is the largest layer of the earth
It is made of super-heated rock
It can be divided into two main parts:
The Lower Mantle (part closer to the core): Stiff, solid, also made of rock, also very hot
The Upper Mantle (part closer to the crust): It includes the asthenosphere and lower part of the lithosphere
Air temperature is between 1,600°F (top) and 7,900°F (bottom)
Due to the great temperature differences, the heat currents are convective and carry heat from the hot Lower Mantle to the cooler Upper Mantle (and the cycle repeats)
Outer Core
Extends about 1,400 miles between the mantle and the Inner Core
Composed of iron alloy (meaning mixture) but primarily iron amongst other mayerials
Also believed to be thousands of degrees in Farheinheit (7,900°F to 11,000°F)
Since there is less pressure on it than there is on the Inner Core; the Outer Core is a liquid molten state
Inner Core
Extends about 780 miles beneath the Outer Core
Primarily composed of iron in a solid state (due to it being super dense)
Believed to be thousands of degrees in Fahrenheit (13,000°F!)
It’s very hot under extreme pressure so it doesn’t matter how hot it is—it is solid because it’s under so much pressure
Continental Crust
The crust that forms our continents
Compared to oceanic crust, it is lighter and less dense—2.7 grams per cubic centimeter (2.7gm*3)
Covers 40% of Earth
It’s described as “granitic” because its main rock component is granite
Oceanic Crust
The crust that forms our oceans
It’s heavier and more dense—3.0 grams per cubic centimeter (3gcm³)
Covers 60% of Earth
It’s described as “basaltic” because its main rock component is basalt
Lithosphere
Made up of the Upper rigid zone of the mantle in combination of the crust
AKA Made up of the Upper Mantle and the crust
Extends about 60 miles
The “plates” of the plate tectonics are actually pieces of the lithosphere
“A lithosphere is to the earth how an eggshell is to an egg”—about 2%
Asthenosphere
A plastic-like layer of the mantle, meaning it can be deformed (it’s similar to silly putty)—it’s a solid but it’s moveable
Extends about 60 miles
** The asthenosphere is believed to be the engine driving plate tectonics
The “engine” part is believed to be because it’s moving due to convective-like currents
On top of the asthenosphere is a hard layer called the lithosphere
Mohorovicic Discontinuity
The separation within the lithosphere of the uppermost mantle and the crust
It’s also called the “Moho”
Plate tectonics
A scientific theory that says the Earth’s crust is made up of individually moving pieces, or plates, that interact in various ways to produce earthquakes, mountains, and the Earth’s crust itself
Plate tectonics are made up of the lithosphere and move on top of the asthenosphere
Plate tectonics is what builds landforms up → “tectonics” comes from Greek origins which also mean “build up”
Alfred Wegener
Continental Drift
A scientific theory coined by Alfred Wegener that proposed that the existing continents today drifted apart from each other over geologic time.
Sea-floor spreading
A scientific theory supported by Marie Tharp that proposed that a new crust is created at underwater mid-ocean ridges and spreads/moves outward as tectonic plates pull apart.
Pangaea
A supercontinent that all existing landforms today were a part of prior to continental drift and seafloor spreading.
The three main ways plates interact in plate tectonics:
Divergence (pulling apart)
Convergence (moving inwards)
Lateral (moving side by side)
Crustal divergence
As plates are pulled apart, upwelling magma rises, and then once it comes into contact with cool ocean water, it cools and solidifies to create new crust
In oceans, crustal divergence results in mid-ocean ridges
On land; crustal divergence results in rift valleys

Mid-ocean ridge
A zone on the ocean floor where two tectonic plates pull apart, allowing magma from the mantle to rise, cool, and form new oceanic crust through an ongoing process called seafloor spreading
The youngest crust is right near the areas of seafloor spreading—which occurs in mid-ocean ridges
As new crust gets made, it gets pushed outwards and replaced by newer crust, creating an ongoing cycle where crust gets older as it moves away
Examples of Ocean Crustal Divergence:
Mid-Atlantic Ridge
East Pacific Rise
Examples of Ocean Crustal Divergence:
Mid-Atlantic Ridge
East Pacific Rise
Examples of Land Crustal Divergence:
East African Rift Valley
Baikal Rift Zone
Plate Convergence
When plates move inwards and come together (this is where a lot of action happens), causing volcanoes, mountains, and brand new crusts
The types of volcanoes, mountains, and earthquakes are at least partially dependent in the type of crust: continental crust and oceanic crust
The varying densities of continental crust (lighter, less dense) and oceanic crust (heavier, more dense) means that they interact in different ways depending on the type of crust at the boundary
When you look at a continent, it is not like each ocean and continent has a plate—it’s often the case where plates have both continental and oceanic crust on them
Possible interactions of plate convergence include:
Continental/oceanic convergence
Oceanic/oceanic convergence
Continental/continental convergence
Continental/oceanic convergence
A tectonic plate collision where a denser oceanic plate moves inwards and subducts (sinks) beneath a more buoyant continental plate
As the oceanic plate subducts, it’s put under pressure and gets hotter, eventually leading to the melting of rock
The melting of rock makes it more buoyant and it is going to rise through the continental crust—going so far as to eventually create volcanoes and mountains
“Subduction leads to orogeny (mountain-building)”
Continental/oceanic convergence involves subduction, orogeny, mid-ocean ridges, terranes, and oceanic trenches
Subduction
When the heavier, denser oceanic crust slides under (subducts) the lighter, less dense continental crust
“Subduction leads to orogeny” → meaning mountain-building
Orogeny
The natural geological process of mountain building that happens when tectonic plates collide, compress, and deform the Earth’s crust at convergent plate boundaries
This is due to subduction
Terranes
A fragment of crust material that formed on or broke off from one tectonic plate and was subsequently welded onto crust lying in another plate
Subduction of the oceanic crust can cause islands and other rock materials to get forced onto the sides of preexisting continental crust—this is called terranes
Terranes have distinctly different geologic history than the continents they are connected to as a result of plate tectonics
Oceanic trench
The long, narrow, and deep areas found offshore of convergent plate boundaries where a denser oceanic plate sinks underneath a lighter plate
Examples of Continental/oceanic convergent plates:
Nazca Plate (oceanic) and the South American Plate (continental), creating the Andes Mountain Range
Juan de Fuca Plate (oceanic) and the North American Plate (continental), creating the Cascade Mountain Range
Oceanic/oceanic convergence
Ring of Fire
Examples of oceanic/oceanic convergence
Continental/continental convergence
Examples of Continental/continental convergence include:
The Indo-Australian plate and the Eurasian Plate, creating the Himalayan Mountains
Lateral (Transform) Plate Boundary
Examples of Lateral (transform) plate boundary include:
The San Andreas Fault: The lateral boundary between the North American Plate and the Pacific Plate
It is mostly the Pacific moving Northwest (NA)
Hotspot
Created when mantle plumes (aka rising material/hot molten rock) break through the surface of the crust, creating volcanoes and volcanic features
The mantle plumes stay in the same area as the plates move across it, meaning as the plates move, the mantle plume will continuously keep creating volcanoes that form a chain
The volcanoes oldest away from the mantle plume are the oldest and the ones directly overhead the hotspot are the youngest
As they lose their source of magma while the plates move and the volcanoes leave their hotspot, they will then proceed to erode over time (whether it be due to waves, currents, rivers, winds, etc.)
Some examples of hotspots include:
The Hawaiian Islands - underneath the Pacific Plate (oceanic) and is moving NW
Yellowstone - underneath the North American Plate (continental)
Iceland - In between the diverging North American Plate and Eurasian Plate on the Mid-Atlantic Ridge
Rock Cycle
Igneous (Intrusive/Extrusive)
Lava
Magma
Pyroclastic
Sedimentary
Strata
Metamorphic
Volcanism
Intrusive Volcanism
Pluton
Batholith
Sill
Lacith
Dike
Pipe
Central Vent | Volcanic Neck
Extrusive Volcanism
Viscosity
Explosive Eruption
Cinder Cone
Composite Cone | Stratovolcano
Caldera
Shield Volcano
‘A‘a
Pahoehoe
Flood/Plataeu Formation
Rocks:
Granite
Basalt
Rhyolite
Pumice
Obsidian
Limestone
Sandstone
Shale
Slate
Marble
Schist
Gneiss
Quartzite