1/35
Comprehensive practice flashcards defining foundational terms and concepts from general chemistry notes covering reaction classification, stoichiometry, solution chemistry, titration methods, and gas laws.
Precipitation Reaction
A chemical reaction in which dissolved substances in aqueous solution react to form one or more solid products, typically occurring when a compound's concentration exceeds its solubility.
Acid-Base Reaction
A chemical reaction in which a hydrogen ion (H+) is transferred from one chemical species to another, typically forming water and a salt.
Acid
A substance that dissolves in water to yield hydronium ions (H3O+) and loses a hydrogen ion (H+) during an acid-base reaction.
Redox Reaction
A chemical reaction in which electrons are transferred from one reactant to another; it can be separated into an oxidation half-reaction and a reduction half-reaction.
Oxidation
The loss of electrons by a chemical species, corresponding to an increase in oxidation number.
Reduction
The gain of electrons by a chemical species, corresponding to a decrease in oxidation number.
Combustion Reaction
A high-temperature chemical reaction where a fuel combines rapidly with an oxidant (usually oxygen) on the reactant side to yield carbon dioxide (CO2) and water (H2O).
Limiting Reactant
The reactant that is completely consumed first in a chemical reaction, which determines and limits the maximum amount of product that can form.
Excess Reactant
Any reactant that remains unconsumed after the limiting reactant has reacted completely.
Theoretical Yield
The maximum calculated amount of product that can form based on the complete consumption of the limiting reactant.
Actual Yield
The measured amount of product obtained from a reaction; values exceeding 100% typically indicate that the sample is wet or contains excess mass.
Percent Yield
The ratio comparing actual output to theoretical output, calculated as theoretical yieldactual yield×100%.
Stoichiometry
The numerical relationship and mole-to-mole ratios between reactants and products derived from a balanced chemical equation.
Empirical Formula
The simplest whole-number ratio of the different atoms present in a chemical compound (such as CH2 for polyethylene).
Molarity (M)
A concentration unit defined as the number of moles of solute divided by the volume of solution in liters (Molarity=liters of solutionmoles solute).
Dilution
The process of preparing a less concentrated solution from a more concentrated stock solution, governed by Mc×Vc=Md×Vd.
Serial Dilution
A stepwise dilution process repeated sequentially over and over, resulting in progressively lower concentrations at each successive stage.
Dissolution
The process by which an ionic compound or solid salt dissolves in water to form separate aqueous ions.
Quantitative Analysis
A chemical determination of the exact amount or concentration of a specific substance in a sample.
Titration
A quantitative analytical technique involving two solutions where a solution of known concentration reacts with an unknown analyte until reaching an endpoint.
Titrant
The standardized reagent solution of known concentration that is delivered during a titration.
Analyte
The target substance or solution in a sample whose concentration is being analyzed and determined.
Indicator
A substance added to a reaction mixture to signal the endpoint of a chemical reaction or titration through a noticeable physical change.
Standardization
The laboratory procedure used to accurately determine the exact concentration of a solution before utilizing it in quantitative titrations.
Strong Acids
Acids that completely ionize in aqueous solution, including HCl, HBr, HI, HNO3, H2SO4, and HClO4.
Strong Bases
Bases that completely dissociate into hydroxide ions in aqueous solution, including NaOH, KOH, Ca(OH)2, and Ba(OH)2.
Gas Pressure
The force exerted per unit area (Pressure=AreaForce), resulting from continuous collisions between gas particles and surrounding container surfaces.
Pascal (Pa)
The SI unit of pressure defined as one newton per square meter (1Pa=1N/m2), where 1atm=101,325Pa.
Manometer
A device utilized to measure gas pressure by evaluating the height difference of a liquid column (typically mercury).
Boyle's Law
A gas law stating that the pressure of a gas is inversely proportional to its volume at constant temperature and mole amount (P1V1=P2V2).
Charles's Law
A gas law stating that the volume of a gas is directly proportional to its Kelvin temperature at constant pressure (T1V1=T2V2).
Avogadro's Law
A gas law stating that gas volume is directly proportional to the amount of gas in moles at constant temperature and pressure (n1V1=n2V2).
Ideal Gas Law
The equation of state combining fundamental gas laws: PV=nRT, where the ideal gas constant R=0.08206Latm/(Kmol).
Dalton's Law of Partial Pressures
The principle stating that the total pressure of a gas mixture is the sum of the partial pressures of each individual gas component (Pi=XiPtotal).
Mole Fraction (Xi)
A dimensionless concentration measure representing the moles of a specific component divided by the total moles in the mixture (Xi=ntotalni).
Van der Waals Equation
A modified gas equation designed to account for deviations from ideal gas behavior caused by finite molecular volume and intermolecular attractive forces.