CHEN 322 Exam 2: Mechanical Properties, Defects, Phase Diagrams, and Kinetics

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/67

flashcard set

Earn XP

Description and Tags

Comprehensive vocabulary flashcards covering mechanical properties, fracture mechanics, fatigue, creep, lattice defects, dislocations, strengthening mechanisms, phase equilibria, the iron–carbon system, and isothermal transformation kinetics.

68 Terms

1
New cards

Normal Stress

Force perpendicular to a cross-sectional area divided by that area (σ=FA\sigma = \frac{F}{A}).

2
New cards

Shear Stress

Stress (τ\tau) that acts parallel to a surface, in contrast to normal stress which acts perpendicular to it.

3
New cards

Engineering Strain

Dimensionless ratio of change in length to original length: ε=L−L0L0=ΔLL0\varepsilon = \frac{L - L_0}{L_0} = \frac{\Delta L}{L_0}.

4
New cards

Young's Modulus (EE)

Physical measure of stiffness, representing resistance to elastic deformation and defined as the initial slope of the stress–strain curve.

5
New cards

Hooke's Law

Linear relation between stress and strain (σ=Eε\sigma = E\varepsilon) applying strictly in the linear-elastic regime before permanent deformation occurs.

6
New cards

Elastic Deformation

Reversible strain wherein the specimen returns completely to its original shape upon unloading.

7
New cards

Plastic Deformation

Permanent, irreversible strain that remains after unloading due to microscopic rearrangement within the material.

8
New cards

Yield Strength

The stress at which appreciable plastic deformation begins; standardly determined using the 0.2%0.2\% offset method.

9
New cards

0.2% Offset Method

Technique to locate yield strength by drawing a line parallel to the initial elastic slope starting at ε=0.002\varepsilon = 0.002 and noting its intersection with the stress–strain curve.

10
New cards

Ultimate Tensile Strength (UTS)

Maximum engineering stress on the tensile stress–strain curve; typically marks the onset of necking rather than immediate fracture.

11
New cards

Necking

Localized narrowing of a tensile specimen after UTS, characterized by a rapid reduction in cross-sectional area in one localized region.

12
New cards

Ductility

The ability of a material to deform plastically before fracture, quantified on a stress–strain curve by the strain at fracture, percent elongation (%EL\%\text{EL}), or percent reduction in area (%RA\%\text{RA}).

13
New cards

Toughness

Energy absorbed per unit volume before fracture, represented by the total area under the complete stress–strain curve.

14
New cards

Resilience

The capacity of a material to absorb recoverable elastic energy per unit volume, represented by the area under the elastic region of the stress–strain curve.

15
New cards

Poisson's Ratio (ν\nu)

Ratio of lateral strain to axial strain (ν=−εlateralεaxial\nu = -\frac{\varepsilon_{\text{lateral}}}{\varepsilon_{\text{axial}}}) measuring transverse contraction during uniaxial tensile extension.

16
New cards

Shear Modulus (GG)

Material property measuring resistance to elastic shear deformation, given by τ=Gγ\tau = G\gamma for small elastic shear strains.

17
New cards

Hoop Stress (σh\sigma_h)

Circumferential stress in a thin-walled cylindrical pressure vessel (σh=prt\sigma_h = \frac{pr}{t}), which is twice the longitudinal stress (σL=pr2t\sigma_L = \frac{pr}{2t}).

18
New cards

True Stress (σT\sigma_T)

The instantaneous applied force divided by the instantaneous cross-sectional area (σT=FA\sigma_T = \frac{F}{A}); relates to engineering stress before necking by σT=σ(1+ε)\sigma_T = \sigma(1 + \varepsilon).

19
New cards

True Strain (εT\varepsilon_T)

Strain defined using instantaneous dimensions; relates to engineering strain prior to necking by εT=ln⁡(1+ε)\varepsilon_T = \ln(1 + \varepsilon).

20
New cards

Strain-Hardening Power Law

Empirical relation σT=K(εT)n\sigma_T = K(\varepsilon_T)^n describing the plastic strain-hardening regime, where KK is the strength coefficient and nn is the strain-hardening exponent.

21
New cards

Brinell Hardness Test

A test measuring localized resistance to indentation based on the impression left by a spherical ball under a known load, empirically correlating to steel tensile strength via UTS (MPa)≈3.45×HB\text{UTS (MPa)} \approx 3.45 \times \text{HB}.

22
New cards

Stress Concentration

Local amplification of stress around geometric discontinuities like holes, sharp corners, voids, or cracks.

23
New cards

Mode-I Stress Intensity Factor (KIK_I)

Parameter describing the stress field magnitude near a crack tip under tensile opening mode: KI=YσπaK_I = Y\sigma\sqrt{\pi a}, where YY is a geometry factor.

24
New cards

Fracture Toughness (KIcK_{Ic})

The critical stress intensity factor that characterizes a material's intrinsic resistance to unstable crack propagation under mode-I loading, expressed in units of MPam\text{MPa}\sqrt{\text{m}}.

25
New cards

Charpy Impact Test

Destructive dynamic test measuring the total energy absorbed by a notched specimen during high-speed fracture using the height difference of a swinging pendulum.

26
New cards

Ductile-to-Brittle Transition Temperature (DBTT)

The temperature marking the shift from ductile energy absorption to brittle behavior, often determined at the midpoint energy of an S-shaped Charpy curve or at a specified absorbed energy.

27
New cards

Fatigue

Progressive structural damage and failure caused by repeated, fluctuating, or cyclic loading, typically occurring at stresses well below static yield and tensile strength.

28
New cards

Stress Amplitude (σa\sigma_a)

Half the difference between the maximum and minimum alternating stresses in a fatigue cycle: σa=σmax⁡−σmin⁡2\sigma_a = \frac{\sigma_{\max} - \sigma_{\min}}{2}.

29
New cards

Fully Reversed Stress Cycle

A cyclic loading condition where stress alternates symmetrically between equal tension and compression (σmin⁡=−σmax⁡\sigma_{\min} = -\sigma_{\max}), resulting in zero mean stress (σm=0\sigma_m = 0).

30
New cards

Fatigue Limit

A limiting stress amplitude on an S–N curve below which certain materials exhibit an endurance plateau and can withstand virtually infinite loading cycles without failing.

31
New cards

Creep

Time-dependent permanent deformation that occurs under sustained mechanical load, prominent at elevated temperatures.

32
New cards

Secondary (Steady-State) Creep

The linear intermediate stage of creep where strain-hardening and recovery mechanisms balance, yielding a nearly constant minimum creep rate (ΔεΔt\frac{\Delta\varepsilon}{\Delta t}).

33
New cards

Vacancy

A zero-dimensional point defect representing a normally occupied crystal lattice site that is empty.

34
New cards

Interstitial Defect

A point defect formed when an atom occupies a void space between regular atomic lattice positions.

35
New cards

Substitutional Impurity

A foreign atom occupying a host atom position on a standard crystal lattice site.

36
New cards

Schottky Defect

A defect pair in an ionic solid consisting of a missing cation and a missing anion, preserving overall electrical neutrality.

37
New cards

Frenkel Defect

A defect pair in an ionic crystal created when an ion leaves its normal lattice site to occupy an interstitial position, leaving an empty vacancy behind.

38
New cards

Dislocation

A one-dimensional line defect in a crystalline lattice whose motion permits plastic shear slip at stresses far below theoretical cohesive strength.

39
New cards

Edge Dislocation

A linear lattice defect formed by the edge of an extra half-plane of atoms, whose Burgers vector is perpendicular to the dislocation line.

40
New cards

Screw Dislocation

A line defect characterized by a helical ramp displacement of lattice planes, having its Burgers vector parallel to the dislocation line.

41
New cards

Burgers Vector (b\mathbf{b})

A vector specifying the magnitude and direction of atomic lattice displacement produced by the passage of a dislocation.

42
New cards

Grain Boundary

The interfacial planar boundary separating two adjacent crystallites or grains that have different crystallographic orientations.

43
New cards

Hall–Petch Relation

Constitutive model σy=σ0+kyd−1/2\sigma_y = \sigma_0 + k_y d^{-1/2} showing how yield strength increases as average grain diameter dd decreases due to slip impediment at grain boundaries.

44
New cards

Solid-Solution Strengthening

Strengthening mechanism where intentional solute atoms cause localized lattice distortions and strain fields that block dislocation glide.

45
New cards

Strain Hardening (Cold Working)

Strengthening of a metal via plastic deformation below its recrystallization temperature, raising dislocation density and entanglement to inhibit further slip.

46
New cards

Recovery

The initial annealing stage where stored internal strain energy and point defect densities decrease by dislocation annihilation and rearrangement without significant grain restructuring.

47
New cards

Recrystallization

The nucleation and growth of new, strain-free, equiaxed grains that consume cold-worked grains, restoring ductility and reducing strength.

48
New cards

Grain Growth

The coarsening of average grain size at elevated temperatures following recrystallization, driven by the thermodynamic reduction of total grain boundary surface area.

49
New cards

Phase

A physically distinct, chemically homogeneous, and mechanically separable portion of matter with uniform properties and crystal structure.

50
New cards

Microconstituent

An identifiable microscopic element or structural arrangement (such as pearlite) that may consist of one or multiple distinct equilibrium phases.

51
New cards

Tie Line

An isothermal horizontal line drawn across a two-phase region of a phase diagram whose endpoints identify the equilibrium chemical compositions of the two coexisting phases.

52
New cards

Lever Rule

A mathematical technique based on mass balance that calculates the relative weight fractions of two coexisting phases using opposite tie-line segment lengths.

53
New cards

Liquidus Line

The boundary line on a phase diagram above which only single-phase liquid is thermodynamically stable.

54
New cards

Solidus Line

The boundary line on a phase diagram below which a material is completely solidified.

55
New cards

Ferrite (α\alpha)

A relatively soft, ductile body-centered cubic (BCC) iron solid solution exhibiting extremely low carbon solubility (≤0.022 wt% C\le 0.022\,\text{wt}\%\,\text{C}).

56
New cards

Austenite (γ\gamma)

A face-centered cubic (FCC) solid solution of carbon in iron capable of dissolving considerably more interstitial carbon than BCC ferrite.

57
New cards

Cementite (Fe3C\text{Fe}_3\text{C})

An intermetallic iron carbide compound containing 6.70 wt% C6.70\,\text{wt}\%\,\text{C} that is hard and brittle.

58
New cards

Pearlite

A lamellar, two-phase microconstituent consisting of alternating parallel plates of ferrite (α\alpha) and cementite (Fe3C\text{Fe}_3\text{C}) produced by eutectoid austenite decomposition.

59
New cards

Eutectoid Reaction

An invariant solid-state reaction occurring at 727 ∘C727\,^\circ\text{C} and 0.76 wt% C0.76\,\text{wt}\%\,\text{C} in steel where solid austenite transforms into ferrite and cementite: γ→α+Fe3C\gamma \rightarrow \alpha + \text{Fe}_3\text{C}.

60
New cards

Eutectic Reaction

An invariant phase transformation where a single liquid phase solidifies directly into two distinct solid phases simultaneously upon cooling: L→α+βL \rightarrow \alpha + \beta.

61
New cards

Hypoeutectoid Steel

A steel containing less than the eutectoid carbon content (<0.76 wt% C< 0.76\,\text{wt}\%\,\text{C}), forming proeutectoid ferrite before remaining austenite decomposes into pearlite.

62
New cards

Hypereutectoid Steel

A steel containing more than the eutectoid carbon concentration (0.76 wt% C<C0<2.14 wt% C0.76\,\text{wt}\%\,\text{C} < C_0 < 2.14\,\text{wt}\%\,\text{C}), which forms proeutectoid cementite prior to pearlite formation.

63
New cards

Proeutectoid Phase

A primary solid phase (either ferrite or cementite) that nucleates and grows from austenite at temperatures above the eutectoid temperature (727 ∘C727\,^\circ\text{C}).

64
New cards

Avrami Equation

Kinetic expression y=1−exp⁡(−ktn)y = 1 - \exp(-kt^n) quantifying the fraction transformed yy as a function of time tt during isothermal phase transitions.

65
New cards

TTT Diagram

Time–Temperature–Transformation plot tracing the isothermal kinetics of non-equilibrium phase transformations from parent austenite as a function of time on a logarithmic scale.

66
New cards

Bainite

A non-lamellar microconstituent consisting of fine ferrite and cementite particles formed by isothermal transformation of austenite at temperatures below the pearlite nose and above MsM_s.

67
New cards

Martensite

A very hard, brittle, supersaturated metastable solid solution of interstitial carbon trapped within a body-centered tetragonal (BCT) iron lattice formed by diffusionless athermal quenching of austenite.

68
New cards

Martensite-Start Temperature (MsM_s)

The critical threshold temperature below which untransformed austenite begins spontaneously transforming into martensite via diffusionless shear.