1/22
Vocabulary practice flashcards covering terminology for concrete types, mechanics, placement procedures, and structural foundation systems.
Tensile stress
The stress that occurs when a material is subjected to a pulling or stretching force.
Rods (Reinforcement bars / Rebar)
Steel bars embedded in concrete to improve its strength, particularly under tensile stress.
Prestressed concrete
Concrete in which steel tendons are stretched before it hardens, putting the concrete into compression once released to improve performance under tensile stress.
Mould (Formwork)
A form or hollow container used to give shape to poured concrete until it sets and hardens.
Anchors
Devices used to hold steel tendons in place while being tensioned, or to secure concrete elements to other structures or the ground.
Strain
The measure of deformation representing displacement between particles in a material caused by an applied load, calculated as Strain=original lengthchange in length.
To shrink
The reduction in volume or size of concrete as it loses moisture during curing and drying, which can cause cracking.
To set
The process by which fresh concrete changes from plastic to hard and gains strength as cement hydrates.
To offset
To counterbalance or adjust the position/effect of something, such as air bubbles counteracting pressure caused by freezing water.
Air-entrained concrete
Concrete containing intentionally introduced tiny air bubbles to improve workability and resistance to freeze-thaw cycles.
Refractory concrete
A specialized type of concrete designed to resist very high temperatures without losing strength.
Furnace
An enclosed chamber or apparatus where materials are heated to extremely high temperatures.
Slab
A flat, horizontal structural plate made of concrete that carries loads to beams, walls, or columns below.
To strengthen
To enhance the properties of concrete, often through adding reinforcement or utilizing high-performance materials.
To reinforce
To add materials such as steel rods or fibers to concrete in order to improve its tensile strength and ductility.
To embed
To insert or place materials, such as rebar or anchors, inside concrete during the pouring process.
Foundation
The lowest part of a building structure that safely transfers the structural load to the ground.

Shallow Foundation
A foundation type used to handle weight distribution for smaller, lighter buildings where the structure depth is less than 6 feet (or under 3 meters).
Deep Foundation
A foundation type used to transfer the superstructure's weight to deeper layers of bedrock (down to depths of 250+ feet) for major structures like skyscrapers and bridges.
Caisson
A watertight box or chamber used in underwater construction work into which water cannot flow, typically used when laying bridge foundations.

Pad Foundation
A type of shallow foundation formed of a reinforced concrete pad designed to support individual columns.
Strip Foundation
A shallow continuous foundation strip designed to carry continuous load-bearing walls.

Raft (Mat) Foundation
A large combined slab of reinforced concrete (solid or cellular) that spreads building loads over a wide area, suitable for poor subsoil conditions.