1/14
Looks like no tags are added yet.
Register Mode
As = 00 Ad = 0. Value is in register Rn. Instruction specifies which register, n, it is in.
Indexed Mode
As = 01, Ad = 1. Operand is in memory at the memory location that the value holds, plus an offset determined by X. Ex. X(Rn)
Symbolic Mode
As = 01, Ad = 1. Operand is in memory at the named address PC + offset. To distinguish Rn = R0 = PC
Absolute Mode
As = 01, Ad = 1. Operand is in memory at the named address. Special case of indexed mode where Rn = R2 = SR
Indirect Register
As = 10, Ad = n/a. Only valid for src operand. Operand is in the memory address contained in the register.
Indirect Autoincrement
As = 11, Ad = n/a. Only valid for src operand. Operand is in memory address contained in register. after getting the operand the register is incremented for the size of the operand. 1 for byte 2 for word.
Immediate
As = 11, Ad = n/a. The operand is a constant encoded in the next instruction word. To distinguish from autoincrement, the source reg is R0 = PC
All addressing modes are valid as-
Source Operands
The following addressing modes is only valid as a source and use registers
Indirect Register, Indirect autoincrement
Which Register serves as a constant generator in MSP430
R3
The first 256 bytes of the MSP430 memory address space are reserved for?
8-Bit I/O peripheral registers
Little Endian means
The lest significant byte is placed at the lower address in memory
The symbolic and absolute addressing modes are special cases of which other addressing mode
Indexed
in the hex number 0×1234, which digit is the least significant bit
4