1/38
Looks like no tags are added yet.
A pressure-measuring device that can display both vacuum and positive pressure is called a _________ gauge.
Compound
For every 1,000 feet of elevation gain, atmospheric pressure drops by approximately _________ inch(es) of mercury (in. Hg).
1
The pressure exerted by Earth’s atmosphere at sea level is _________ psi.
14.969
Increasing a vapors temperature above its boiling temperature is known as…
Superheating
When heat is added to a substance and no temperature increase is observed, the heat involved is called ________ heat.
Latent
Heat energy that causes a change in temperature is referred to as ________ heat.
Sensible
Under standard conditions at sea level, absolute pressure (PSIA) equals _______ psi.
14.969
The absolute temperature scale based on degrees Celsius in known as the ________ scale.
Kelvin
Temperature can best be described as a measurement of the ___________ level of heat.
Intensity
At standard atmospheric pressure, water reaches its boiling point on the Celsius scale at…
100 degrees
Water boils at 212 degrees F when absolute pressure is _________ psia.
14.969
The property that describes how much heat a substance must absorb to change its temperature is called its…
Specific heat
Standard atmospheric pressure at sea level is _______ inches of mercury.
29.92
The abbreviation PSIG refers to ____________ pressure
Gauge
The __________ is the pressure-sensing component in a gauge that is linked to a needle and can measure pressures above and below atmospheric pressure.
Bourdon tube
Water boils at 212 degrees C under normal atmospheric conditions.
False
Water at 0 degrees F contains no heat energy or molecular motion.
False
On the Fahrenheit scale, the temperature at which molecular motions stops is ________ F
-460 degrees
On the Celsius scale, the temperature at which molecular motions stops is ________ C
-273 degrees
As temperature rises, the molecules within a substance…
Move faster
The Fahrenheit temperature scale is primarily used in the United States as part of the __________ measurement system.
English
A difference in temperature has no effect on the rate of heat transfer.
False
Differences in volume alone determine the rate of heat transfer between two substances.
False
Heat transfer rate depends on the temperature difference between two substances.
True
The laws of thermodynamics explain the behavior and movement of heat energy.
True
Both sensible heat and latent heat can be directly measured using a thermometer.
False
For water at 60 degrees F to begin boiling, it must gain both sensible heat and __________ heat.
Latent
An aneroid barometer measures atmospheric pressure by comparing it to pressure inside…
A closed bellow
Heat transfer by radiation can occur through empty space because it does not require a…
Medium
The two most commonly used fluids in HVAC systems are __________ and __________.
Water and air
Heat transfer that occures through direct molecular contact is called…
Conduction
According to the first law of thermodynamics, energy cannot be ___________ nor ____________.
Created, destroyed
One Btu is defined as the amount of heat required to raise _______ pound of water by _______ degree(s) F.
1, 1
When water boils at 212 degrees F, it absorbs only __________ heat.
Latent
How many Btus of latent heat does it take to turn 32-degree ice into 32-degree water?
144 Btus
How many Btus of latent heat does it take to turn 212-degree water into 212-degree steam?
970 Btus
Heat that causes a temperature change is called…
Sensible heat
Heat that causes a change of state with no temperature change is called…
Latent
200 lbs of force is distributed across an area of 4 square inches, what is the psi of this area
50 psi