Direct Current (DC) Machines and Electric Machines Overview

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/16

flashcard set

Earn XP

Description and Tags

Flashcards testing core vocabulary and fundamental concepts of electric machines and direct-current (DC) machine construction.

17 Terms

1
New cards

Classification of Electric Machines

The categorization of electric machines into static machines (transformers) and rotating machines (motors and generators), which are further divided into AC and DC types.

2
New cards

DC Generator

A machine that converts mechanical energy into electrical energy (dc voltage and current).

3
New cards

DC Motor

A machine that converts electrical energy into mechanical energy by supplying dc power (dc voltage and current).

4
New cards

Stator

The stationary part of a DC machine, also referred to as the field.

5
New cards

Rotor

The rotating part of a DC machine, also referred to as the armature.

6
New cards

End Bells

Circular plates mounted at opposite ends of a DC machine housing bearings that support the armature shaft.

7
New cards

Main Frame

A cylindrical steel alloy structure that supports the end bells, armature, brushes, and field poles while providing a low-reluctance path for magnetic flux outside the armature.

8
New cards

Commutation

The process of switching loop connections on the rotor of a DC machine as loop voltage switches polarity to maintain a constant DC output voltage.

9
New cards

Armature

The entire rotating assembly of a DC machine, consisting of coils, a slotted iron core, and a commutator mounted on a shaft of laminated disks.

10
New cards

Commutator Segment

Conducting stripes placed axially on the armature shaft where interconnections of armature coils are made and contact is established with the external circuit.

11
New cards

Brush Rigging

A spring mechanism mounted on but electrically insulated from the machine housing that maintains physical contact between brushes and commutator segments.

12
New cards

Alnico

An alloy consisting of aluminum, nickel, cobalt, copper, and iron used to create permanent magnets for field poles in small DC machines.

13
New cards

Series Field Winding

A field winding where large current flows through a few turns of thick wire, providing very low resistance.

14
New cards

Shunt Field Winding

A field winding where small current flows through many turns of thin wire, resulting in higher resistance compared to a series field winding.

15
New cards

Armature Reaction

The distortion of the main field magnetic flux caused by the magnetic field produced by current in the armature windings under load.

16
New cards

Inter-Poles

Magnetic poles placed between main field poles and connected in series with the armature winding so that their flux opposes the armature current flux to reduce armature reaction.

17
New cards

Compensating Windings

Windings embedded in the main pole faces, running parallel to armature conductors and wired in series with the armature to cancel out armature flux.