1/43
GCSE Computer Science 1CP2
Amplitude
a measurement of the distance the wave is from the x axis at a point in time. Humans perceive this as the loudness or magnitude of an analogue signal.
Analogue
using signals or data represented by a quantity that is continuously changing.
Analogue to digital conversion (ADC)
the process of converting an analogue sound into a digital representation.
Arithmetic shift
a binary shift, either left or right. When performing a right shift, the cleared positions on the left are filled with copies of the MSB. When performing a left shift, the cleared positions on the right are replaced with only Os.
ASCII
a 7-bit binary code used to represent text, with each character assigned a value between 0 and 127.
Binary
data represented by just two values (e.g. high/low, on/off, 1/0).
Binary prefix
multiplies a unit by a power of 2.
Binary shift
an operation in which all the bits of a binary pattern are shifted a number of places to either the left or the right.
Bit
short for binary digit, this is the smallest unit of data in a computer. A bit can have the value 1 or 0, corresponding to on or off. All the data in a computer system is represented as patterns of bits.
Bit depth
the number of bits used to encode a sound sample. Increasing the number of bits used increases the accuracy of the representation.
Bitmap
a digital image composed of a matrix of tiny blocks of colour called picture elements (pixels).
Byte
a group of eight adjacent bits that can produce 256 different binary patterns.
Carriage return
the character generated inside the computer when a user presses the Enter key on the keyboard.
Character set
a defined list of numerical character codes recognised by a computer's hardware and software.
Colour depth
the number of bits used to encode the colour of each pixel in a bitmap image. The more bits used, the greater the number of tones/ colours that can be represented.
Compression
reduces the size of a file by repackaging or removing some of its data. There are two types of compression - lossless and lossy.
Control character
a character that means something other than its actual value. Both ‘\r’ and ‘\n’ are control characters.
Font definition
defines how a font is to be displayed on a screen.
Hexadecimal
a base-16 number system designed to make handling long patterns of binary digits easier for humans.
Leading zeros
any zero digit that comes before the first non-zero digit in a binary number. Used to pad out a binary number to make it a specific length, e.g. 8 bits or 16 bits.
Least significant bit (LSB)
the rightmost bit of a binary number with the lowest place value of 2°.
Line feed (LF)
a character ‘\n’ that causes the next output to be on the next vertical line.
Logical shift
a binary shift, either left or right, where the cleared positions are filled with only Os. Used to shift unsigned binary numbers.
Lossless compression
compressing a file in such a way that it can be decompressed without any loss of data.
Lossy compression
some of the data is permanently removed; the original file cannot be fully restored when the lossy file is decompressed.
Mebibytes
1024 kibibytes, or 1024 * 1024 bytes or 1024 * 1024 * 8 bits.
Most significant bit (MSB)
the leftmost bit of a binary number with the highest place value. In an 8-bit binary number the MSB has a weighting 2⁷ (128).
Nibble
half a byte - a group of four _ adjacent bits that can produce 16 different bit patterns.
Pixel
short for ‘picture element’, the smallest element of a bitmap image. If an image size remains constant, then the more pixels there are, the sharper and more detailed the image is.
Pixelated
an image where the individual pixels are visible.
Place value
the weighting value of each digit in a number.
Resolution
determines the size of an image when it is displayed on screen or printed on paper and is measured in pixels per inch (ppi). A 200 x 100 pixel bitmap with a resolution of 100 ppi will measure 2” x 1” when displayed on a screen, whereas, with a resolution of 200 ppi, it will measure 1” x 0.5”. The higher the resolution the more detail an image has.
Sampling
taking measurements of the amplitude of a sound wave at regular intervals of time (e.g. 44 100 samples per second).
Sampling interval
the time between samples measured in seconds. A small sample interval produces a better reproduction of the original sound but increases the size of the file.
Sampling points
Discrete points in time at which a reading of the amplitude of the sound is taken and stored as a binary number.
Sampling rate or sampling frequency
the number of sound samples taken per second, measured in hertz. The higher the sampling rate the more accurately the sound will be reproduced in the file.
Signed number
a number that can be either positive or negative, indicated by its sign.
Spam
irrelevant or unsolicited messages sent over the internet, typically to a large number of users, for the purposes of advertising, phishing, spreading malware, etc.
Trojan
malware disguised as legitimate software. Hackers use some form of social engineering technique to trick users into downloading and executing Trojans on their systems. Once installed, a Trojan can take control of the user's computer, steal data or download more malware.
Two-dimensional array
a table of rows and columns. Two indices are used, one to reference the rows and the other the columns. All the elements of a two- dimensional array share the same data type.
Two’s complement
used to represent signed numbers. The MSB of a two's complement number indicates whether it is positive or negative. The range of values that can be represented by 8 bits in two's complement is -128 to +127.
Unidirectional
data flows in one direction only.
Unsigned number
a number with a non-negative value of 0 or more.