1/246
Looks like no tags are added yet.
cartilage, tendons, ligaments, bones, muscle
What are the (5) internal structures of the body that loads effect?
deformation, stress, forces, material
Amount of ___ produced is related to the ___ caused by the ___ & ___ that are loaded
mechanical stress
internal force divided by the cross-sectional area of the surface on which the internal force acts
tension, compression, shear, uniaxial
What are the 3 principal stresses?
*All ____
stress = internal force/area
Equation for stress
Pascal or N/m^2
What are the 2 SI units for STRESS?
tensile stress
Axial or normal stress that occurs at an analysis plane as a result of a force or load that tends to pull apart the molecules bonding an object together at that plane
tensile, perpendicular, normal or axial
___ stress acts ___ to the analysis plane
*What are the 2 other names for it
axial, normal, longitudinal
What are the (3) stresses names for stresses that act PERPENDICULAR to the analysis plane?
tensile, pulls apart, molecules, plane
___ stress is a stress that occurs at the analysis plane due to a force or load that ___ ___ the ___ bonding the object together at the ___
area, smaller, stronger
When cross-sectional ___ is LARGER, the stress is ___ and the bone is ___
area, larger, weaker
When cross-sectional ___ is SMALLER, the stress is ___ and the bone is ___
tension, deform, stretching, elongating, loads
When an object or material is axially loaded in ___, the object tends to ___ by ___ or ___ in the direction of the external ___
compression
Axial stress that results when a load tends to push or squash the molecules of a material more tightly together at the analysis plane.
compression, deform, shortening, forces
When an object or material is axially loaded in ___, the object tends to ___ by ___ in the direction of the external ___
shear stress
transverse stress that acts parallel to the analysis plane as a result of forces acting parallel to this plane
tau
What is the symbol for SHEAR STRESS?
sigma
What is the symbol for AXIAL STRESSES?
compression & tension
What are the 2 types of axial stresses?
simple loads
*External forces act along the SAME LINE
*Produces an uniaxial load
Analysis plane is perpendicular to long axis
*Only ONE stress analyzed
number, direction, location, shape
What (3) factors of external forces affect the type of load occurring?
*Also depends on ___ of object
bending
asymmetric loading that produces tension on one side of a body's longitudinal axis and compression on the other side
equilibrium, tensile, compressive, equal
In order to have ___ in BENDING, the net ___ force & net ___ force must be ___ to each other
area farther, bending loads, moment arm
Objects with greater __ ___ from its neutral axis are able to withstand GREATER ___ ___ because they have larger ___ ___
long bones
What are the primary structural members of the human body?
bending, gravity, muscles, tendons, ligaments, bones
Most bones in the human body are constantly under some ___ load
*What (5) components does this result from
bending, curving, elongating, shortening
An object subjected to a ___ load will deform by ___, with the tension side ___ and the compression side ___
torsion
Occurs when torques act about the long axis of the object at each end
counter torque, shear, torsion
A ___ ___ is created by a ___ force
*Original torque causes __
combined load
Combination of forces that produce axial compression, axial tension, bending, torsion, shear loads, or any combination of these loads on an object
combined, added
In ___ loads, the stresses in the configuration are ___ to determine the overall stress produced
strain
*Extent of deformation relative to its initial condition
*Amount of deformation from stress applied
linear strain, tensile and compressive
occurs as a result of a deformation change in the object's length
*Produced by __ & ___ stress
E = length change/original length
Equation for linear strain
percentage, units
What is strain usually recorded as?
*Cancels out ___
shear strain, shear
change in ORIENTATION of an object's molecules
*Produced by ___ stress
Poisson's Ratio
Ratio of lateral strain to axial strain.
Ex: Intervertebral discs: compressive loads shorten vertical dimension, but laterally, the disc bulges outward
shear
What is a type of stress is transverse stress?
multiaxial loads
Direction of forces is different to each other (Bending, torsion, combined)
elastic modulus, stiffer, k
a measure of the STIFFNESS of a material;
*The higher the this is the ___ the material
*Represented by ___
elastic modulus, stress, strain, incline
___ ___ is also the RATIO between ___ and ___
*Also the ___ of stress-strained curve
elastic limit
*Yield point for material
Point of stress-strain curve where any further stress will cause permanent deformation
proportional limit
end of the linear elastic range of the curve, often coincides with the yield point
plastic behavior
permanent deformation after a certain load, when load exceeds a certain size
*Won't return to original shape
stiff, steeper
The more ___ a material is, the ___ the slope will be for a stress-strain curve
Ex: Bone vs ligaments/tendons
mechanical, strength, stress/strain, failure
From a ___ standpoint, the __ of the material is related to with the maximum ___/___ the material is able to withstand before ___
yield strength, elastic limit
Stress at which material begins to deform plastically.
*Stress at the ___ ___ of a material's stress-strain curve
yield, permanent, dimensions, unable, original
Anything beyond the __ strength will cause ___ changes in the ___ of the material and material fails in sense that it's ___ to regain its __ shape
mechanical strength
Maximum stress that the material is capable of withstanding
failure strength
stress level where total failure occurs
-breakage or complete rupture of the material occurs
*Endpoint of stress-strain curve (blue)
failure strain
strain exhibited by a material when breakage occurs
failure strains, ductile
Materials with LARGE __ ___ are more ___ materials
failure strains, brittle
Materials with SMALL __ ___ are more ___ materials
toughness
ability of a material to absorb energy
pliant, stiff
___ materials have a SMALLER slope than ___ materials
brittle, stress, strain, easier, deform
A hard, ___ material is able to withstand great ___ but a small ___
*Breaks ___ because it can't ___ easily
moist/live, brittle
Which bone is HARDER to break: dry or moist/live bone
*Whichever one is LESS ___
age & activity
What 2 factors affect the MECHANICAL properties of all CONNECTIVE tissues?
bone, cartilage, ligament, tendon
What are the (4) PASSIVE elements of connective tissues?
collagen, elastin, ground substance, minerals, water
What (5) extracellular components are involved in connective tissues
collagen, stiff, tensile, compression
*Most abundant substance in connective tissue
*Very ___ w/ high ___ strength but unable to resist ___
elastin, pliant, extensible
elastic like fibers found in connective tissue
*Very ___ and very ___
isotropic materials
materials with SAME mechanical properties in EVERY direction
anisotropic materials
materials with DIFFERENT mechanical properties, depending on the direction of the load
anisotropic
Which are connective tissues: isotropic or anisotropic materials
Cortical (compact) bone
dense and hard outer layers of bone
cancellous/trabecular/spongy bone
porous lightweight inner layer of bone
porosity, strength, stiffness
The ___ of the bone determines its ___ & ___
stronger, stiffer
When load is applied QUICKLY, bone is ___ & ___
weaker, pliant
When load is applied SLOWLY, bone is ___ & ___
compression
In what stress are bones STRONGEST?
shear
In what stress are bones WEAKEST?
hyaline cartilage, articular
Cartilage that covers the ends of long bones at joints; most abundant
*Also called ___ cartilage
fibrous cartilage
very tough form of cartilage found in the intervertebral disks of the spine and at the junctions where tendons attach to bone
elastic cartilage
cartilage with abundant elastic fibers; more flexible than hyaline cartilage
*NOT IN MUSCULOSKELETAL SYSTEM
articular, compressive, joints
___ cartilage transfers ___ loads from bone to bone at the ___
creep, increase, constant, elastic
___: ___ in strain under a ___ stress
*Mainly acts in ___ region
*How quickly cartilage reaches constant stress
creep, magnitude, thickness, permeability
___ rate depends on ___ of compressive stress, the ___ of the articular cartilage & ___ of cartilage
stress relaxation, decrease, elongated, length
___ ___: ___ in stress over time when a material is __ to a set ___
ligaments
Which has more elastin: ligaments or tendons?
arrangement, collagen
The main difference between cartilage & tendons/ligaments is the ___ of their ___ fibers
parallel
What is the arrangement of collagen fibers in tendons/ligaments (nearly for ligaments)
less, weaker, arrangement, elastin
Ligaments are ___ stiff and slightly ___ than tendons
*Due to ___ or collagen fibers & slightly larger ___ fibers
toe region, wavy, taut, rest
___ ___: initial stress that results in the ___ collagen fibers becoming straight and aligning with one another; fibers must become ___
*Tissues at ___
toe, linear, stress, proportional, strain
Past the ___ region, the collagen fibers behavior is ___, with an increase in ___ results in a ___ increase in ___
stiffness, number, active contractile
Muscle ___ varies as a function of the ___ of __ ___ elements
muscle
Which has a greater failure strain: muscle or tendons/ligaments
bone
What is the strongest connective tissue: tendons, ligaments, cartilage or bone
similar, pliant, stiffer, increase, threshold
Ligaments, cartilage & tendons have ___ stress-strain curves, with being more ___ under lower stresses, but becoming ___ as stresses ___ past a certain __
ultimate stress
Muscle has a SMALLER ___ __ than tendon, ligament or bone
failure strain
Muscle has a LARGER ___ __ than tendon, ligament or bone
support, protection, movement
What are the MECHANICAL functions of the skeletal system?
hemopoiesis, mineral storage
What are the PHYSIOLOGICAL functions of the skeletal system?
mechanical, skeletal, rigid, joints, movements
From a ___ standpoint, the __ system may be thought of as an arrangement of ___ links connected to each other at ___ to allow specific ___
bone & joint
What are the basic components of the skeletal system?
mechanical stresses & function
What 2 things determine the FORM of a bone?
large movements
What is the function of LONG bones?
*Perform __ __
transfer forces, shock absorption, mobile
What is the function of SHORT bones?
*Good for ___ ___ & ___ ___
*Not very ___
protection
What is the function of FLAT bones?
*Provide ___
support, protection, leverage
What are the functions of IRREGULAR bones?
*Don't fall into other categories
*Includes sesamoid bones