6.2.4 Fuels from crude oil

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/41

encourage image

There's no tags or description

Looks like no tags are added yet.

42 Terms

1
New cards

What is crude oil?

Crude oil, also known as petroleum, is a naturally occurring raw material.

2
New cards

What is crude oil mostly made of?

  • It is a complex mixture of hydrocarbons, most of which are alkanes.

  • Hydrocarbons contain only carbon and hydrogen atoms.


3
New cards

What does crude oil provide a large proportion of?

  • Crude oil provides a large proportion of our energy needs.

  • It is also a source of organic chemicals used to manufacture plastics, fibres, drugs and pesticides.


4
New cards

Why does crude oil need refining?

  • Crude oil has little direct use in its raw form.

  • It contains too much of the high-boiling fractions (large hydrocarbon molecules).

  • It does not contain enough of the low-boiling fractions (smaller hydrocarbon molecules) that are in high demand, particularly petrol.


5
New cards

What do refineries do?

Refineries therefore process crude oil to produce different products in the proportions required by industrial and domestic users.

6
New cards

What are the 3 main processes used to refine crude oil?

  1. Fractional distillation: Separates hydrocarbons according to their different boiling temperatures.

  2. Cracking: Breaks large hydrocarbon molecules into smaller, more useful molecules.

  3. Reforming: Changes the structures of hydrocarbons to produce more useful molecules, particularly those with higher octane numbers.


7
New cards

What is fractional distillation?

Fractional distillation is a physical separation technique that separates a mixture of hydrocarbons according to their different boiling temperatures.


  • It is the first stage in refining crude oil.


8
New cards

What does fractional distillation produce?

  • It produces fuels, lubricants and feedstocks for the petrochemical industry.

  • It is a continuous, large-scale industrial process.


9
New cards

What are the different groups of hydrocarbons collected called?

Fractions

10
New cards

What is the 1st step of fractional distillation?

Step 1 – Heating the crude oil

  • Crude oil is heated in a furnace to approximately 400°C.

  • Most of the hydrocarbons vaporise.


11
New cards

What is the 2nd step of fractional distillation?

Step 2 – Entering the fractionating column

  • The hot mixture enters a fractionating tower.

  • The tower contains approximately 40 horizontal trays.

  • The trays are pierced with small holes.


12
New cards

What is the 3rd step of fractional distillation?

Step 3 – Temperature gradient

  • The bottom of the column is hot, approximately 400°C.

  • The top is cool, approximately 20°C.

  • Therefore, the column gets progressively cooler towards the top.


13
New cards

What is the 4th step of fractional distillation?

Step 4 – Rising vapours

  • Hydrocarbon vapours rise through the column.

  • As they rise, they encounter progressively cooler temperatures.


14
New cards

What is the 5th step of fractional distillation?

Step 5 – Condensation

  • Different hydrocarbons condense at different heights.

  • A vapour condenses when it reaches a tray containing liquid at a temperature just below its boiling temperature.

  • Condensation releases energy.

  • This heats the liquid on the tray and evaporates more volatile compounds.

  • Repeated evaporation and condensation helps separate the hydrocarbons.


15
New cards

What is the 6th step of fractional distillation?

Step 6 – Collecting fractions

  • Smaller hydrocarbons with lower boiling temperatures rise further up the column.

  • Larger hydrocarbons with higher boiling temperatures condense lower down.

  • Fractions are collected at different heights.


16
New cards

Why do hydrocarbons have different boiling temperatures?

  • Larger hydrocarbon molecules have more electrons.

  • They experience stronger London dispersion forces between their molecules.

  • More energy is needed to overcome these intermolecular forces.

  • Therefore, larger hydrocarbons have higher boiling temperatures.

The opposite applies to smaller hydrocarbons.



Remember:

  • Smaller molecules → weaker London forces → lower boiling temperatures → collected higher up.

  • Larger molecules → stronger London forces → higher boiling temperatures → collected lower down.


17
New cards

What is Vacuum distillation and why is it used?

  • Some large hydrocarbons have boiling temperatures too high for them to vaporise at the furnace temperature and atmospheric pressure.

  • These hydrocarbons undergo vacuum distillation in a separate column.

  • The pressure is reduced.

  • Lowering the pressure reduces the boiling temperatures of the hydrocarbons.

  • This allows them to vaporise and be separated.



LOWER PRESSURE ——> LOWER BOILING TEMPERATURE


18
New cards

What is Petrol and where is it used?

  • A blend of hydrocarbons based on the gasoline fraction.

  • Contains approximately C₅–C₁₀ hydrocarbons.

  • Used in petrol engines.


19
New cards

What is Jet fuel and where is it used?

  • Produced from the kerosene (paraffin) fraction.

  • Contains approximately C₁₀–C₁₆ hydrocarbons.

  • Used in aircraft engines.


20
New cards

What is diesel and where is it used?

  • Produced from the diesel oil fraction.

  • Contains approximately C₁₄–C₂₀ hydrocarbons.

  • Used in diesel engines.


21
New cards

Why is it important that sulfur compounds from fuel fractions?

  • Fuels must be refined to remove sulfur compounds.

  • When sulfur compounds burn, they can produce sulfur dioxide.

  • Sulfur dioxide is an air pollutant that contributes to acid rain and environmental damage.

  • Removing sulfur compounds reduces pollution.


22
New cards

What is seasonal petrol blending?

Petrol must be carefully blended to ensure engines start reliably and run smoothly.

The proportion of volatile hydrocarbons is adjusted depending on the season.

23
New cards

What kind of petrol is used during winter?

  • A higher proportion of volatile hydrocarbons is added.

  • This helps petrol evaporate more readily.

  • It makes cold-starting engines easier.


24
New cards

What kind of petrol is used during summer?

  • A lower proportion of volatile hydrocarbons is added.

  • This prevents petrol from evaporating too readily.


25
New cards

What is volatility?

how readily a substance evaporates?

26
New cards

What is engine knocking?

  • Petrol needs to burn smoothly in an engine.

  • If combustion occurs irregularly, it can cause engine knocking.

  • Engine knocking can reduce engine performance and damage the engine.

  • Petrol is therefore blended to improve its combustion properties.


27
New cards

What is octane number?

Octane number is a measure of a fuel's resistance to engine knocking.

28
New cards

How is octane number determined?

It is determined by comparing the fuel's knocking performance with a reference mixture of two compounds:

  • 2,2,4-trimethylpentane (assigned an octane number of 100).

  • Heptane (assigned an octane number of 0).

The higher the octane number, the greater the resistance to knocking.

29
New cards

How can octane number be increased?

  • Increasing the proportion of branched-chain alkanes.

  • Increasing the proportion of arenes.

  • Blending in oxygen-containing compounds.


30
New cards

Why is cracking necessary?

Fractional distillation produces:

  • Too many heavy fractions containing large hydrocarbons.

  • Too few smaller hydrocarbons, which are in greater demand for fuels such as petrol.

Cracking is used to convert the heavier fractions, such as diesel oil and fuel oil, into more useful smaller hydrocarbons.

31
New cards

What is cracking?

Cracking is the process of breaking large hydrocarbon molecules into smaller molecules.

  • It converts long-chain alkanes containing 12 or more carbon atoms into smaller, more useful molecules.

  • The products include a mixture of branched alkanes, cycloalkanes, alkenes and branched alkenes.


32
New cards

Why are the products of cracking more useful?

  • Smaller alkanes can be used as fuels.

  • Alkenes are valuable feedstocks for the chemical industry, particularly for making polymers.

  • Branched and cyclic hydrocarbons can improve petrol quality.


33
New cards

What are the two types of cracking?

  • Thermal

  • Catalytic


34
New cards

What is thermal cracking?

  • Takes place at high temperatures in the presence of steam.

  • Produces a higher proportion of alkenes.


35
New cards

What is Catalytic cracking?

  • Takes place in the presence of a catalyst.

  • Produces higher yields of branched and cyclic alkanes.

  • The catalyst is a synthetic sodium aluminium silicate belonging to a class of compounds called zeolites.

  • Cracking takes place on the catalyst surface at approximately 500°C.


36
New cards

What are zeolites?

Zeolites are synthetic sodium aluminium silicate catalysts.

37
New cards

What is the structure of a zeolite?

  • They have a three-dimensional structure, similar to clay.

  • Silicon, aluminium and oxygen atoms form a structure containing tunnels and cavities.

  • Small molecules can fit into these tunnels and cavities.

  • Reactions take place on the catalyst surface.


38
New cards

Why are zeolites excellent catalysts?

  • They can be developed with different active sites.

  • These active sites can favour molecules with particular shapes and sizes.

  • This allows the catalyst to favour reactions that produce desired products.


39
New cards

What is reforming?

Reforming converts straight-chain alkanes into branched-chain or cyclic alkanes, or arenes. It also converts cyclic alkanes into arenes.

40
New cards

What is the purpose of reforming?

The purpose is to produce more useful hydrocarbons, particularly those with higher octane numbers.

41
New cards

What are the three transformations present in the process of reforming?

Straight-chain alkanes → branched-chain alkanes


Straight-chain alkanes → arenes


Cyclic alkanes → arenes

42
New cards

Why is reforming useful?

  1. It converts straight-chain alkanes into branched and cyclic hydrocarbons that are more useful as fuels.

  2. It produces arenes such as benzene and methylbenzene, which are valuable chemical feedstocks.

  3. It produces hydrogen as a valuable by-product that can be used elsewhere in the refinery.