1/21
Vocabulary practice flashcards covering fundamental definitions, formulas, phase relations, resonance, transformer theory, and LC oscillations from the Alternating Current (AC) lecture.
Alternating Current (AC)
An electric current that reverses its direction periodically at fixed intervals of time.
Peak Value (V0 or i0)
The maximum instantaneous amplitude attained by alternating voltage or alternating current during one cycle.
Angular Frequency (ω)
The rate of change of phase of a sinusoidal alternating waveform, given by ω=T2π=2πf.
Average Current over a Full Cycle
The time average of alternating current over one complete cycle, which evaluates to exactly 0.
Average Current over a Half Cycle
The mean value of alternating current taken over a half cycle (0 to 2T), equal to ⟨i⟩=π2i0.
Root Mean Square (RMS) Current (irms/Effective Current)
The square root of the mean of the squared current over a cycle, calculated as irms=2i0≈0.707i0, equivalent to the steady DC value that produces the same heat in a given resistor.
Phasor
A vector that rotates about the origin with an angular frequency ω, whose projection onto the vertical axis gives the instantaneous value of an alternating voltage or current.
Pure Resistive Circuit
An alternating current circuit containing only a resistor, where the alternating current and alternating voltage are entirely in phase with each other (ϕ=0∘).
Capacitive Reactance (XC)
The opposition offered by a capacitor to the flow of alternating current, defined by the relation XC=ωC1 and measured in ohms (Ω).
Pure Capacitive Circuit
An alternating current circuit containing only a capacitor, in which current leads voltage by a phase angle of 90∘ (2π radians).
Inductive Reactance (XL)
The opposition offered by an inductor to the flow of alternating current, defined by the formula XL=ωL and measured in ohms (Ω).
Pure Inductive Circuit
An alternating current circuit containing only an inductor, in which voltage leads current by a phase angle of 90∘ (2π radians).
Impedance (Z)
The total effective opposition offered by an AC circuit to the flow of alternating current, expressed in ohms (Ω); for a series LCR circuit, Z=R2+(XL−XC)2.
Power Factor
The cosine of the phase difference between voltage and current in an AC circuit, defined as cos(ϕ)=ZR, which scales the average power dissipation.
Wattless Current
The current flowing in a purely inductive or purely capacitive circuit that dissipates zero average power because cos(ϕ)=0.
Electrical Resonance (Series LCR)
The circuit condition occurring when capacitive reactance equals inductive reactance (XL=XC), causing impedance to reach its minimum value (Z=R) and current to reach its maximum amplitude.
Resonant Angular Frequency (ω0)
The specific natural frequency at which resonance occurs in an LC or LCR circuit, determined by ω0=LC1.
Quality Factor (Q-Factor)
A dimensionless measure of the sharpness of resonance or selectivity in a tuning circuit, expressed as Q=2Δωω0=Rω0L=R1CL.
Transformer
A stationary electrical device operating on the principle of mutual induction used to increase or decrease alternating voltages according to VpVs=NpNs.
Eddy Currents
Circulating electric currents induced within the magnetic soft iron core of a transformer by changing magnetic flux, causing energy loss as heat; minimized by using a laminated core.
Hysteresis Loss
Energy lost as heat in the core of a transformer due to the continuous cycle of magnetization and demagnetization caused by alternating magnetic fields; minimized by selecting a core material with a narrow hysteresis loop.
LC Oscillations
The periodic transfer of electromagnetic energy between the electrostatic field of a capacitor (UE=2Cq2) and the magnetic field of an inductor (UB=21Li2) at an angular frequency of ω=LC1.