1/36
Looks like no tags are added yet.
Discuss the major processes that can affect the chemical composition of magma
Fractional Crystallization (Crystal Settling), Assimilation and Melting of Country Rock,Magma Mixing,Partial Melting of the Source Rock
Describe how partial melting can affect magma/lava/rock composition
occurs when only a fraction of a solid rock melts because different minerals have different melting points.Because different minerals have different melting points, the resulting magma, lava, and leftover solid rock change in composition
Express what major factors control magma/lava viscosity, and how changes in those factors affect viscosity (e.g., if silica content increases, does viscosity increase or decrease?)
chemical composition (silica content), temperature, volatile (dissolved gas) content, and crystal content
Describe the factors that can cause magma/lava to freeze
When heat loss and changes in physical or chemical conditions cause the molten liquid to crystallize
-Express which main factors affect the cooling rate of magma/lava, and how cooling rate impacts any rocks that form
texture and crystal size of the resulting igneous rocks
-Sketch Bowen’s reaction series; be able to apply Bowen’s reaction series to predict melting or crystallization order of different minerals
intrusive rocks
formed when molten magma cools and solidifies slowly beneath the Earth's surface
articulate how each intrusive rock type forms
when molten magma gets trapped deep inside the Earth's crust and cools very slowly over thousands or millions of years
articulate how each extrusive rock type forms
when molten rock (magma) breaches the Earth's surface as lava or ejects as pyroclastic debris and cools rapidly in contact with the air or water
how the different modes of formation cause the rock characteristics to differ (i.e., what properties differ between intrusive and extrusive rocks, and how were those differences brought about?)
differ primarily in cooling speed and location of formation, which directly control their crystal size, texture, density, and sound. because of the distinct physical and chemical conditions under which they formed
Based on your understanding of the characteristics of mafic, intermediate, and felsic magmas/lavas,deduce the characteristics of rocks formed from each
formed from mafic, intermediate, and felsic magmas inherit their composition, color, density, and mineral content directly from the molten material
igneous texture
describe the size, shape, and arrangement of mineral crystals or rock fragments, which reveal how and where the magma or lava cooled
list the main types of igneous texture
(Coarse-Grained),Fine-Grained, (Vitreous), Vesicular, Fragmental,Pegmatitic:
articulate the conditions required to produce each of the main textures
specific environmental, material, or technical conditions to be produced
-Based on the names of major igneous rocks, be able to classify them with regard to composition and texture;
Felsic: High silica (65–75%), rich in quartz and light-colored feldspar; typically light in color.
Intermediate: Medium silica (55–60%), a mix of light and dark minerals.
Mafic: Low silica (45–50%), rich in iron and magnesium (ferromagnesian); dark in color.
Ultramafic: Very low silica (<40%), composed almost entirely of olivine and pyroxene; dark or greenish
Intrusive (Plutonic): Cooled slowly underground; has a coarse-grained (phaneritic) texture with visible crystals.
Extrusive (Volcanic): Cooled rapidly on the surface; has a fine-grained (aphanitic) texture, glassy texture (e.g., obsidian), or gas-bubble (vesicular) texture (e.g., pumice, scoria)
given a composition and texture, name the rock which has those characteristics
igenous rocks- Felsic (High Silica / Light-Colored: quartz, potassium feldspar). Intermediate (Medium Silica: amphibole, intermediate plagioclase) Mafic (Low Silica / Dark-Colored: pyroxene, calcium-rich plagioclase, olivine) Ultramafic (Very Low Silica: mostly olivine and pyroxene)
Describe the major intrusive structures (including dikes, sills, laccoliths, volcanic necks, plutons,and batholiths)
Dikes: Tabular (sheet-like) bodies of magma that cut across existing rock layers or bedding planes. They are discordant structures that usually fill vertical or near-vertical fractures.
Sills: Tabular bodies of magma that inject parallel to existing rock layers or sedimentary bedding. They are concordant structures that often look like interbedded rock layers until contact metamorphism is examined.
Laccoliths: Lens- or dome-shaped bodies formed when viscous magma pushes its way between rock layers and arches the overlying strata upward into a distinct bulge. They typically feature a flat floor and a domed roof. [
discuss the characteristics of each, and how each one forms
Dikes
How they form: Magma under immense hydraulic pressure exploits vertical or near-vertical fractures in the crust. As it forces its way upward, it cuts straight through preexisting rock layers and cools into a wall-like barrier.
Characteristics:
Discordant: They cut across the bedding planes or foliation of the surrounding country rock.
Sills
How they form: Fluid, low-viscosity magma (typically basaltic) is injected under high pressure parallel to existing horizontal bedding planes. The fluid weight of the overlying rock is lifted upward as the magma spreads laterally.
Characteristics:
Concordant: They run strictly parallel to the sedimentary or volcanic layers they invade.
Laccoliths
How they form: Viscous magma (typically silicic or intermediate, like dacite or rhyolite) is injected into horizontal bedding planes. Because it is too thick to spread out into a thin sill, it bunches up and arches the overlying rock strata into an umbrella-shaped dome.
Characteristics:
Concordant:
They follow sedimentary layering at their base but dramatically deform the layers above.
weathering
the breaking down or dissolving of rocks, soils, and minerals on Earth’s surface in place (in situ) without the movement of material
erosion
the geological process where natural forces wear away and transport soil, rock, and mineral debris from one location to another
clasts
a fragment of geological detritus, mineral crystal, or pre-existing rock broken off through physical weathering
discuss how clasts are categorized
grain size, Clast Shape (Roundness), Sorting, Mineral and Rock Composition, Bioclasts
what the two main types of weathering are
Physical (Mechanical) Weathering and Chemical Weathering
Discuss how all the specific weathering processes discussed in class (e.g., frost wedging) function;
mechanical (physical) weathering, which disintegrates rock without changing its chemical composition, and chemical weathering, which transforms the rock into new minerals.
Discuss how all the specific weathering processes discussed in class (e.g., frost wedging) function;
mechanical (physical) weathering, which disintegrates rock without changing its chemical composition, and chemical weathering, which transforms the rock into new minerals.
classify any specific weathering process as either physical
These processes break rocks into smaller pieces without changing their chemical composition
classify any specific weathering process as chemical
These processes break down rocks by altering their mineral composition through chemical reactions.
Distinguish exfoliation from other jointing
(also called sheeting) are curved, surface-parallel fractures that peel rock masses into sub-planar slabs, whereas other jointing (such as tectonic or systematic joints) consists of planar, steep, and cross-cutting fractures driven by regional rock deformation
discuss how orthogonal joints joints are formed
intersecting sets of natural fractures in rock masses that meet at roughly 90-degree angles, dividing the bedrock into cuboidal or grid-like blocks
Classify the major rock-forming minerals with regard to their susceptibility to weathering
Goldich Dissolution Series
express how weathering susceptibility relates to Bowen’s reaction series
its inverse, minerals that crystallize first at high temperatures (top of the series) are the most susceptible to chemical and physical weathering, while minerals that crystallize last at low temperatures (bottom of the series) are the most resistant
-Explain how weathering area are interrelated
re directly proportional: as a rock breaks down into smaller pieces, its total surface area increases, which in turn accelerates the rate of weathering.
-Explain how weathering and surface area are interrelated
breaking a rock into smaller pieces increases its total surface area, which speeds up future weathering
Discuss differential weathering
the process where different rocks, or different parts of the same rock mass, break down, dissolve, or disintegrate at varying rates
Give an example of a common situation where differential
weathering occurs
Grand Canyon, where alternating layers of hard, resistant rocks and soft, easily weathered rocks break down at different speeds to create a stair-step landscape of vertical cliffs and gentle slopes
Describe how fractional crystallization can affect magma/lava/rock composition
changes the chemical composition of a magma body as early-forming, high-temperature minerals crystallize and physically separate (usually by sinking or floating) from the remaining liquid melt
discuss how are exfoliation joints are formed
surface-parallel fractures that cause massive rocks—such as granite—to split into curved, onion-like layers and peel away