1/53
Flashcards covering key vocabulary, chemical theories, gas chromatography components, column dynamics, Van Deemter parameters, and headspace analysis concepts from the provided lecture transcripts.
Average Atomic Mass
The average mass of all natural isotopes of the atoms in the chemical formula of a compound.
Exact Mass
The precise calculated theoretical mass of a single, specific isotope found by adding the masses of the single most abundant isotope for each constituent element.
Qualitative Criteria
Analytical evaluation criteria used for identification, which include retention time (RRT), peak integration, exact mass, controls (+, −, blank), and cutoffs.
Quantitative Criteria
Analytical evaluation criteria used for measurement, which include retention time (RRT), mandatory peak integration, UV spectrum (HPLC-UV), AMP, LLQU, and ion ratios.
Functional Groups
Specific arrangements of atoms within a molecule that impart unique physical and chemical properties (such as boiling point, density, solubility, and reactivity) on that molecule independent of the other atoms present.
Electronegativity
The measure of an atom's tendency to attract shared electrons towards itself in a chemical bond.
Ionization Potential
A chemical property determined by functional groups that dictates which chemicals to use and which to avoid during analytical method development.
Ionic Bonding
Electrostatic forces between ions resulting in a complete transfer of electrons between two atoms, such as in NaCl.
Covalent Bonding
An interaction where two atoms share electrons to become more stable, such as in H2O.
Ion-Dipole Interaction
An intermolecular force occurring between an ion and a polar molecule with a permanent separation of charge.
Dipole-Dipole Interaction
An intermolecular force resulting from polar molecules interacting with other polar molecules.
Hydrogen Bonding
An electromagnetic attractive interaction between a polar hydrogen atom and an electronegative atom (such as nitrogen, oxygen, or fluorine) from another molecule or chemical group.
London Dispersion Forces
Temporary intermolecular forces occurring when nonpolar molecules in close proximity become momentarily polarized, creating a chain reaction of induced dipoles.
Lewis Acid
A substance that can accept a pair of electrons to form a new bond, also referred to as an electrophile or seeker of an additional electron pair.
Lewis Base
A substance that can donate a pair of electrons to form a new bond, also referred to as a nucleophile or seeker of a positive nucleus.
Base-Dissociation Constant
The equilibrium constant for the reaction in which a base abstracts a proton from water to produce an ammonium ion and a hydroxide ion.
Hydroxyl Group
A functional group consisting of an oxygen atom covalently bonded to a hydrogen atom (-OH) that imparts internal polarity, hydrophilic properties, and water solubility to a molecule.
Carboxyl Group
A functional group composed of a carbonyl group covalently bonded to a hydroxyl group (-OH) on the same carbon atom, acting as a weak acid in aqueous solution by dissociating its hydrogen ion.
Amino Group
A functional group consisting of a nitrogen atom attached to two hydrogen atoms that acts as a base by picking up a proton in aqueous solution to form its ionized state (-NH3+).
Sulfhydryl Group
A functional group consisting of a sulfur atom covalently bonded to a hydrogen atom (-SH).
Alkyl Groups
Functional groups that tend to push electrons away from themselves, building up extra negative charge on adjacent atoms such as nitrogen.
Amide Neutrality
The property of amides where the nitrogen lone pair becomes delocalized over the molecule, preventing it from accepting hydrogen ions and acting as a base.
Carbonyl Group
A functional group containing a polar C=O bond where the carbon acts as an electrophile and oxygen acts as a nucleophile, base, and hydrogen-bond acceptor.
Carrier Gas
The mobile phase in gas chromatography (such as hydrogen or helium) responsible for moving sample compounds through the column.
Makeup Gas
An auxiliary gas (commonly nitrogen) that sweeps the GC detector to prevent separated compounds from rejoining or broadening.
Inlet Septum
A rubber component pierced by the injection syringe that reflexes to close the inlet to the atmosphere, preventing loss of gas pressure and carrier gas.
Liner
A tube made of deactivated glass, optionally packed with glass wool, positioned inside the inlet to assist in vaporizing sample and protecting it from the metal inlet.
Split Injection
An injection mode for higher concentration samples where high flow rate splits the sample and carrier gas between the column and the split vent.
Splitless Injection
An injection mode for low limits of detection where the split vent is closed for a set hold time to allow most of the sample to enter the column before remaining solvent is purged.
On-Column Injection
An injection mode where the sample is introduced directly onto the column without passing through a hot injection port, suitable for thermally labile compounds.
Direct Injection
An injection mode for trace-level compounds where the column is sealed directly to the liner, avoiding contact with inlet seals or glass wool.
Purge and Trap Injection
A headspace technique where volatile organic compounds (VOCs) are purged from a matrix by an inert gas into an adsorbent trap where they are concentrated and injected onto a column.
Programmable Temperature Vaporization
An injection method where sample is injected into a cold inlet and then follows a temperature program to vaporize solvent separately from target compounds.
Column Bleed
Degradation of the column's stationary phase over time or due to high temperatures, oxygen, or damaging sample components.
Capillary Column
A hollow, narrow tube coated with a stationary liquid phase or adsorbent on its inner surface, protected externally by a polyimide resin coating over fused silica.
Eddy Diffusion
The A term in the Van Deemter equation accounting for mobile phase turbulence and multiple flow paths through a column.
Longitudinal Diffusion
The B term in the Van Deemter equation accounting for diffusional band broadening of analytes within the mobile phase or carrier gas over time.
Mass Transfer Resistance
The C term in the Van Deemter equation accounting for kinetic delays in analyte interactions into and out of the stationary and mobile phases.
Linear Velocity
The rate of speed (ν) at which the mobile phase moves through the chromatography column.
Height Equivalent to a Theoretical Plate
A measure of column efficiency defined by HETP=NL, where lower values represent superior column efficiency and narrower peaks.
Column Efficiency
The total number of theoretical plates (N) in a column, calculated from isothermal or isocratic runs using equations such as N=16×Wb2tR2 or N=5.546×W1/22tR2.
Partition Coefficient
A measure of an analyte's relative tendency to dissolve in or distribute between the mobile phase and stationary phase.
Retention Time
The elapsed time (tR) between sample injection and the arrival of the analyte peak maximum at the detector.
Dead Time
The time (tM) required for an unretained component of the mobile phase to travel through the column without interacting with the stationary phase.
Selectivity
The ratio of adjusted retention times or retention factors of two analytes ($ u = rac{t_{Rb}'}{t_{Ra}'} = rac{k_b}{k_a}$), describing their relative interaction with the stationary phase.
Retention Factor
A dimensionless measure of an analyte's relative migration rate on a column, calculated as kA=tMtR−tM.
Headspace Analysis
An equilibrium technique in GC where volatile compounds in a sealed vial partition into the gas layer above a solid or liquid sample for sampling without direct solvent extraction.
Vortexing
A vigorous mixing technique used prior to preparation to homogenize samples or facilitate vapor formation in headspace vials for analytes not easily vaporized at room temperature.
Inverting
A standard mixing process used when analytes are not easily vaporized at room temperature.
Rocker Mixing
A gentle sample mixing technique used when analytes are easily vaporized to maintain the analyte in the matrix for uniform sampling.
Henry's Law
A gas law stating that at a fixed temperature, the solubility of a gas in a liquid is directly proportional to the partial pressure of that gas above the liquid.
Dalton's Law
A gas law stating that the relative concentrations of components at equilibrium are equal to their relative concentrations before equilibrium.
Boyle's Law
A gas law stating that the pressure and volume of a gas are inversely proportional.
Internal Standard in Blood Alcohol Analysis
A chemical reagent, typically n-propanol, mixed with patient blood samples due to its analytical similarity to ethanol.