1/91
Looks like no tags are added yet.
Compounds or mixtures of compounds that, by their presence in solution, resist changes in pH upon addition of small quantities of acid or alkali.
Buffers
Resistance to a change in pH.
Buffer action
Dosage forms placed directly into pH-sensitive body fluids that need buffers.
Injections, ophthalmic solutions
Why formulations are buffered to keep their pH constant.
For maximum stability
Pharmacy use of buffers in tests or assays.
Tests/assays requiring a specific pH
Equation for a weak acid + conjugate base (salt) buffer.
pH = pKa + log [Salt]/[Acid]
Equation for a weak base + conjugate acid (salt) buffer.
pH = pKw - pKb + log [Base]/[Salt]
Magnitude of resistance to pH change; the gram equivalents of acid or base that change the pH of 1 L of buffer by 1 unit.
Buffer capacity (buffer efficiency, index, or value)
Equation for buffer capacity.
β = 2.3 C Ka[H⁺] / (Ka + [H⁺])²
The symbol for buffer capacity.
β
The total buffer concentration (sum of the molar concentrations of acid and salt) in the buffer capacity equation.
C
Greatest as the ratio approaches unity (pH = pKa)
salt/acid ratio
The effect of increasing salt and acid concentrations on buffer efficiency.
Buffer becomes more efficient
The pH at which buffer capacity is maximal.
pH = pKa
What to choose for maximum buffer capacity.
A weak acid with a pKa approximately equal to the working pH
Factors to consider when preparing a buffer.
Chemicals available, sterility of the final solution, drug stability, cost, freedom from toxicity
The instrument used to verify pH and buffer capacity.
pH meter
Factor that changes the pH of a buffer by altering the ionic strength.
Neutral salts
Factor that causes a small positive or negative deviation in pH by altering the activity coefficient.
Dilution / addition of water
The change in pH when a buffer is diluted to half strength.
Dilution value
The sign of the dilution value when pH rises with dilution.
Positive
The sign of the dilution value when pH falls with dilution.
Negative
The factor described by the temperature coefficient of pH.
Temperature
The effect of increasing temperature on the pH of acetate buffers.
pH increases
The effect of increasing temperature on the pH of boric acid-sodium borate buffers.
pH decreases
The type of buffer that changes little with temperature.
Acid buffers
The type of buffer that changes more with temperature (due to Kw).
Basic buffers
Solutions of drugs that are weak electrolytes also show this action.
Buffer action
What the weak buffer action of drugs is unable to counteract.
pH changes from atmospheric CO₂ and the alkalinity of the bottle
What is often added to drug solutions because their own buffer action is too weak.
Extra buffers
Weak acids or bases that act like buffers and change color as their degree of dissociation varies with pH.
Indicators
The indicator with full alkaline color (yellow) at pH ~6 and full acid color (red) at pH ~4.
Methyl red
A combination of indicators covering pH 1-11.
Universal indicator
The indicators in a universal indicator.
Methyl yellow, methyl red, bromthymol blue, thymol blue, phenolphthalein
The pH determination method that is a cheaper alternative but less accurate and less convenient.
Colorimetric
The pH determination method that is more accurate and uses a pH meter or spectrophotometer.
Electrometric / spectrophotometric
The pH determination method used for solutions that are not colored or turbid.
Colorimetric
The pH determination method useful in nonaqueous acid-base studies.
Colorimetric
Why colorimetric methods are not applicable to unbuffered solutions.
The indicator itself changes the pH
Buffer composed of boric acid + monohydrated sodium carbonate.
Gifford's buffer
The pH range of Gifford's buffer.
pH 5-9
Buffer composed of sodium phosphate salts (+ NaCl for isotonicity).
Sorensen's buffer
The pH range of Sorensen's buffer.
pH 6-8
Buffers composed of boric acid, sodium borate + NaCl (isotonic), used for ophthalmic preparations.
Palitzsch; Hind and Goyan buffers
The pH range of Palitzsch and Hind and Goyan buffers.
pH 7-9
Buffer system with five compositions covering pH 1.2 to 10.0.
Clark-Lubs buffer
The Clark-Lubs composition covering pH 1.2-2.2.
HCl + KCl
The Clark-Lubs composition covering pH 2.2-4.0.
HCl + potassium hydrogen phthalate
The Clark-Lubs composition covering pH 4.2-5.8.
NaOH + potassium hydrogen phthalate
The Clark-Lubs composition covering pH 5.8-8.0.
NaOH + KH₂PO₄
The Clark-Lubs composition covering pH 8.0-10.0.
H₃BO₃, NaOH, KCl
The pH range of eye solutions that cause little pain or damage.
pH 4.5-11.5
The buffer capacity that eye solutions should have.
Low
The pH range outside of which Sorensen's phosphate buffer irritates the eye.
pH 6.5-8
The solution (pH 5) that causes no discomfort in the eye due to its low buffer capacity.
Boric acid
Salts that irritate the eye due to high buffer capacity.
Pilocarpine salts
The epinephrine salt that is more irritating (due to acidity).
Epinephrine bitartrate
The epinephrine salt that is less irritating than the bitartrate.
Epinephrine HCl
The buffering usually used for parenterals injected into blood.
Unbuffered or buffered to low capacity
The buffering condition in which oral aspirin is absorbed more rapidly.
Systems buffered at low capacity
What buffering of oral aspirin minimizes.
Gastric irritation
The buffer capacity of the solution that minimizes tissue irritation.
Lower buffer capacity
The volume of solution used for a given concentration that minimizes tissue irritation.
Smaller volume
The volume and buffer capacity of the physiological fluid that minimize tissue irritation.
Larger volume and buffer capacity
The factors to consider to minimize tissue irritation.
pH, buffer capacity (solution vs. body fluid), and volume
The two competing considerations in choosing a buffer.
Stability vs. optimum therapeutic response
Solutions applied to delicate membranes (nasal, ophthalmic, parenteral) should have about the same osmotic pressure as body fluids.
Isotonic solution
Solution that causes no swelling or contraction of tissues and no discomfort.
Isotonic solution
Solution in which cells swell and water enters the cell, leading to hemolysis.
Hypotonic solution
Solution in which cells shrink and water passes out.
Hypertonic solution
Method of measuring tonicity based on the appearance of RBCs suspended in drug solutions.
Hemolytic method
What a hypotonic solution liberates in the hemolytic method.
Oxyhemoglobin
The colligative property used to measure tonicity.
Freezing point depression (Δtf)
The freezing point depression of blood and tears.
-0.52 °C
The freezing point depression of 0.9% NaCl (isotonic).
-0.52 °C
The freezing point depression range of a hypotonic solution.
Between 0 and -0.52 °C
The freezing point depression range of a hypertonic solution.
Below -0.52 °C
Class of tonicity adjustment in which NaCl or other substances are added to lower the freezing point to -0.52 °C.
Class I
The methods under Class I.
Cryoscopic and NaCl equivalent
Class of tonicity adjustment in which water is added to make an isotonic solution, then an isotonic diluting vehicle.
Class II
The methods under Class II.
White-Vincent and Sprowls
Method that computes the NaCl to add so the freezing point equals -0.52 °C.
Cryoscopic method
The freezing point lowering produced by a 1% NaCl solution.
0.58 °C
Grams of NaCl equivalent to 1 g of drug.
NaCl equivalent (E)
Equation for the NaCl equivalent.
E = 17 (Liso/MW)
The NaCl equivalent of the drug in the NaCl equivalent method (X = E × W).
X
The NaCl needed to be isotonic, equal to 0.9% of the volume.
Y
The NaCl to be added (Z = Y - X).
Z
Method that computes the mL of water needed to make an isotonic solution, then QS with isotonic vehicle.
White-Vincent method
Equation for the White-Vincent method.
V = (W × E) × 111.1
Method whose V values are based on 1 fl oz (30 mL) of a 1% solution.
Sprowls method
The weight of drug (W) used in the Sprowls method.
0.3 g