DM MIDTERM - DENTURE BASE RESINS

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/45

encourage image

There's no tags or description

Looks like no tags are added yet.

46 Terms

1
New cards

When were acrylic polymers first introduced as denture base materials?

1937

2
New cards

What are the highlighted focus areas of polymers in dentistry?

Fixed and removable prosthodontics

3
New cards

What are examples of polymers in fixed prosthodontics?

Cements; Impression trays; Impression materials; Temporary crowns

4
New cards

What are examples of polymers in removable prosthodontics?

Impression trays; Impression materials; Denture bases; Denture teeth

5
New cards

What are the classifications of denture base resins? **

  • Self cured

  • Heat cured

  • Light cured

  • Microwave activated

  • Laser activated


6
New cards

What are the requirements of denture base resins? **

  • Tasteless, odorless, non-toxic, non-irritant

  • Aesthetically satisfactory

  • Color stability

  • Insoluble and impermeable to oral fluids

  • Low specific gravity [light weight]

  • Should tolerate the temperature of food

  • Dimensional stability

  • Easy to fabricate and repair

  • Should have enough strength, resilience, and abrasion resistance

  • Good thermal conductivity


7
New cards

What is the powder component of denture base resin?

  • Poly methyl methacrylate and other co-polymers - dissolved by monomer to form the dough

  • Benzoyl peroxide - initiator

  • Compound of mercuric sulfide [or] cadmium sulfide - dyes

  • Zn or Ti oxide - opacifier

  • Dibutyl phthalate - plasticizer

  • Dyed organic fibers

  • Esthetics - inorganic particles


8
New cards

What is the liquid component of denture base resin?

  • M.M.A. - monomer

  • Dimethyl para toluidin – activator

  • Dibutylphthalate - plasticizer

  • Glycal dimethacrylate - cross-linking agent

  • Hydroquinone - inhibitor


9
New cards

What are the curing methods of acrylic polymers and their activation?

Heat cure: heat activation; Chemical cure: chemical activation; Light cure: light-activated photoinitiator

10
New cards

What are the liquid components of heat-cure acrylic resin shown in the lecture?

MMA; Hydroquinone

11
New cards

What are the powder components of heat-cure acrylic resin shown in the lecture?

PMMA; Fillers; Dyes; Benzoyl peroxide

12
New cards

What are the liquid components of chemical-cure acrylic resin shown in the lecture?

MMA; Hydroquinone; Accelerator (tertiary aromatic amine)

13
New cards

What are the powder components of chemical-cure acrylic resin shown in the lecture?

PMMA; Fillers; Dyes; Benzoyl peroxide

14
New cards

What are the components of the light-cure acrylic resin putty system shown in the lecture?

MMA / PMMA; Fillers; Dyes; Camphorquinone (photo initiator)

15
New cards

What are the processing stages shown for acrylic polymers?

Mix → dough formation; Packing stage; Polymerized

16
New cards

What are the melting point and boiling point of MMA shown in the lecture?

Melting point - 48 ° C; Boiling point ~ - 100 ° C

17
New cards

What is the volumetric shrinkage of MMA?

21%

18
New cards

What is the modulus of elasticity of MMA?

2200 MPa

19
New cards

What is the creep of MMA?

9 MPa

20
New cards

What are the physical properties of polymethylmethacrylate (PMMA)?

  • Clear, transparent, can be pigmented - pink, white, tooth colour, transparent


21
New cards

What is the density of PMMA?

1.19gm/cm cube

22
New cards

What is the compressive strength of PMMA?

75 MPa

23
New cards

What is the tensile strength of PMMA?

52 MPa

24
New cards

What is the impact strength of PMMA?

Low

25
New cards

What is the hardness of PMMA?

16-18 KHN

26
New cards

What is the modulus of elasticity of PMMA?

2400 MPa

27
New cards

What is the dimensional stability of PMMA?

Moderate

28
New cards

What are the steps in the conventional processing of an acrylic denture base?

  1. PRELIMINARY IMPRESSION: Make an alginate impression of the patient's maxillary arch.

  2. STUDY MODEL: Pour the impression in gypsum to produce the study cast.

  3. CUSTOM TRAY AND FINAL IMPRESSION: Fabricate an acrylic-PMMA tray; make the final elastomeric impression.

  4. RECORD BASE AND WAX RIM: Prepare the record base, establish jaw relations, and arrange the trial denture teeth.

  5. FLASKING AND WAX ELIMINATION: Invest the waxed denture in gypsum; boil out and remove the wax.

  6. PACK AND POLYMERIZE: Pack acrylic resin into the mold, cure, then deflask and finish the denture.


29
New cards

What is the typical heat-cure cycle shown in the processing diagram?

74 °C for at least 8 hours

30
New cards

What are the technical methods listed for acrylic denture base processing?

  • Compression moulding technique

  • Injection moulding technique

  • Fluid resin technique

  • Visible light curing technique


31
New cards

What are the steps in denture base resin processing?

  1. Preparation of wax pattern

  2. Preparation of split mould

  3. Application of separating medium

  4. Mixing of powder and liquid

  5. Packing

  6. Curing

  7. Cooling

  8. Deflasking, finishing, and polishing


<ol><li><p><em>Preparation of wax pattern</em></p></li><li><p><em>Preparation of split mould</em></p></li><li><p><em>Application of separating medium</em></p></li><li><p><em>Mixing of powder and liquid</em></p></li><li><p><em>Packing</em></p></li><li><p><em>Curing</em></p></li><li><p><em>Cooling</em></p></li><li><p><em>Deflasking, finishing, and polishing</em></p></li></ol><p></p>
32
New cards

What does the curing cycle refer to?

The heating process used to control polymerization.

33
New cards

What is Technique 1 for the curing cycle?

Heat in water bath at 74 degrees for 8 hrs with no terminal boiling.

34
New cards

What is Technique 2 for the curing cycle?

Heat at 74 degrees for 8 hr & then increase to 100 degrees for 1hr.

35
New cards

How should the flask be cooled?

bench cooled for 30 min - then immersed in cool tap water for 15 min.

36
New cards

What can rapid cooling cause?

Rapid cooling may result in warping of the denture base due to differences in the thermal contraction of the resin and investing stone.

37
New cards
  • Elastic modulus (stiffness) of acrylic (PMMC) denture base:


low

38
New cards
  • Impact strength of acrylic (PMMC) denture base:


moderate

39
New cards
  • Fatigue strength of acrylic (PMMC) denture base:


moderate

40
New cards
  • Water sorption of acrylic (PMMC) denture base:


high

41
New cards
  • Water soluabilty of acrylic (PMMC) denture base:


low

42
New cards
  • Thermal conductivity of acrylic (PMMC) denture base:


low

43
New cards
  • Polymerization shrinkage of acrylic (PMMC) denture base:


moderate to high (6% by volume)


44
New cards
  • Heat distortion temperature/glass transition temperature (Tg) of acrylic (PMMC) denture base:


  • is 95 °C

exposure to hot water can cause distortion and compromise fit.


45
New cards
  •  Biocompatibility of acrylic (PMMC) denture base:


  • generally good

However, toxicity or allergic reactions if excessive residual monomer is present due to improper processing.


46
New cards

What are the uses of denture base resins listed in the lecture?

  • Denture base**

  • Record base**

  • Impression trays (custom tray)

  • Artificial teeth

  • Temporary crowns

  • Orthodontic appliances

  • Maxillofacial prosthesis