1/89
Looks like no tags are added yet.
Rheology
Study of deformation and flow of materials
Viscosity
Measure of resistance to flow ("thickness")
Fluids
Rheology area that covers mixing, passage through orifices (hypodermic needles) and fluid transfer
Quasisolids
Rheology area that covers spreading on skin, extrusion from tubes and drug release from the base
Solids
Rheology area that covers powder flow from hoppers into die cavities or capsules, and packability
Newton's law of flow
Law stating that shear stress = η × rate of shear (F/A = η·dv/dr)
Poise
Unit of viscosity equal to 1 dyne·s/cm²
0.01 poise
1 cP is equal to this many poise
Fluidity
Reciprocal of viscosity (1/η)
Newtonian system
System with constant viscosity at any shear rate; linear plot through the origin
Non-Newtonian system
System whose viscosity changes with shear rate
Kinematic viscosity
Absolute viscosity divided by density (ν = μ/ρ)
Stoke (St)
Common unit of kinematic viscosity; 1 of these = 100 cSt
Decreases
Effect of increasing temperature on the viscosity of liquids
Increases
Effect of increasing temperature on the viscosity of gases
Plastic flow (Bingham bodies)
Flow with a yield value: no flow until shear stress is exceeded, then Newtonian-like; curve meets the stress axis, not the origin
Yield value
In plastic flow, the value that corresponds to the force of flocculation
Mobility
Reciprocal of plastic viscosity
Pseudoplastic flow (shear thinning)
Flow in which viscosity decreases as shear rate increases; begins at the origin with no yield value
Dilatant flow (shear thickening)
Flow in which viscosity increases as shear increases and volume increases; returns to fluid when stress is removed
Pseudoplastic
Flow type seen in polymers/gums in solution like tragacanth, Na alginate, MC and CMC (e.g., hand sanitizer, catsup)
Dilatant
Flow type seen in suspensions with ≥ 50% small deflocculated particles; may set up as a paste and damage equipment
Plastic
Flow type seen in flocculated particles in concentrated suspensions, gels, pastes, creams, ointments and cerates
Thixotropy
Isothermal, slow, reversible gel → sol conversion with shear, with recovery on standing; down-curve is to the LEFT of the up-curve
Antithixotropy (negative thixotropy)
Viscosity increases with time of shear; equilibrium form is sol; down-curve is to the right
Magnesia magma
Example of an antithixotropic system (flocculated suspension of 1-10% solids)
Rheopexy
Sol forms gel faster when gently shaken than at rest; equilibrium state is gel
Dilatant
Flow behavior that thins, vs. one that thickens, vs. one with a yield value (name the one that thickens)
Temperature, shear rate, time, measuring conditions, pressure, composition and additives
Factors affecting rheology (list)
Capillary (Ostwald) viscometer
Viscometer for Newtonian systems only; measures time for liquid to flow between two marks by gravity
Falling sphere (Hoeppler) viscometer
Viscometer where a ball rolls down an almost vertical tube of test liquid at known temperature
Cup and bob viscometer
Viscometer in which the sample is sheared between a bob and the cup wall (Couette, Searle, Rotovisco)
Brookfield viscometer
Searle-type rotational viscometer used for pastes and semisolids
Cone and plate (Ferranti-Shirley) viscometer
Viscometer with constant shear rate across the sample; saves filling/cleaning time and allows temperature stabilization
Viscoelasticity
Property of materials with both elastic (solid) and viscous (liquid) behavior
Creep and oscillatory methods
Methods used to measure viscoelasticity
Maxwell element
Viscoelastic model of a spring and dashpot in series
Voigt element
Viscoelastic model of a spring and dashpot in parallel
Psychorheology
Study of feel, spreadability, color, odor and other sensory properties of topical preparations
Class I
Class of topical product that is soft and for ophthalmic use
Class II
Class of topical product that is a medicated ointment of intermediate consistency
Class III
Class of topical product that is stiff and protective, for ulcerative conditions
Reaction kinetics
Study of reaction rate and how it is influenced by concentration, solvent, pressure and temperature
Reaction rate
Velocity of a reaction
Reaction order
How concentration affects the rate of a reaction
Zero order
Order of reaction whose rate is independent of concentration and constant with time
First order
Order of reaction whose rate is proportional to the concentration remaining
Second order
Order of reaction whose rate is the product of 2 concentrations (A + B → products)
C vs t
Equation for zero order: C = −k₀t + C₀. Its rate constant unit is conc/time. Its linear plot is this
log C vs t
Linear plot for first-order reactions
1/(a − x) vs t
Linear plot for second-order reactions
0.5C₀/k₀
Half-life formula for zero order
0.693/k
Half-life formula for first order (constant)
1/(C₀k)
Half-life formula for second order
1/time (hr⁻¹, min⁻¹)
Unit of k for first-order reactions
L/(mol·sec)
Unit of k for second-order reactions
Apparent (pseudo) order
Behavior when one reactant is in large excess or constant, making a second-order reaction act like first-order
Apparent zero-order
Kinetics shown by suspensions
Half-life (t½)
Time for the concentration to fall by half
t90 (shelf-life)
Time for 10% degradation, with 90% of the drug intact
Substitution method
Method of determining order by inserting data into integrated equations; the constant k identifies the order
Graphic method
Method of determining order where a straight line for C vs t means zero order, and log C vs t means first order
Half-life method
Method of determining order where t½ is not constant for zero order but constant for first order
Temperature
Factor where an increase leads to an increased reaction rate
Solvent
Factor that alters the transition state and activity coefficients, and may open additional pathways
pH
Factor that changes the magnitude of the hydrolytic rate
Buffer salts
Additive that increases ionic strength and causes general acid/base catalysis
Surfactants
Additive that causes micellar catalysis
Complexing agents
Additive that can increase stability by forming a less reactive complex
Hydrolysis
Most common mode of degradation; H⁺ and OH⁻ are catalysts (esters, amides, lactams)
Oxidation (auto-oxidation)
Degradation usually by atmospheric O₂; a free-radical chain reaction
N₂ or CO₂
Remedy for oxidation: replacing air in the package with these gases
Antioxidants
Compounds that donate electrons/hydrogen to stop free radicals
Photolysis
Degradation by sunlight or room light (λ < 400 nm)
Amber/opaque container
Container used to prevent photolysis
Ascorbic acid, BHA, BHT, propyl gallate, sodium bisulfite, sodium sulfite, tocopherols
Common antioxidants (list)
Butylated hydroxyanisole
Abbreviation BHA stands for this
Butylated hydroxytoluene
Abbreviation BHT stands for this
Shelf-life
Time a product can be stored before it becomes unfit by chemical decomposition or physical deterioration
±5%
Range of nominal concentration/dose within which a product is generally fit for use
Real-time stability testing
Test with samples at 3-5 °C and room temperature (20-25 °C), analyzed at intervals
Accelerated stability testing
Test using rate constants to predict shelf-life; 6 months at 40 °C / 75% RH or 30 °C / 60% RH
Arrhenius equation
Equation used to predict room-temperature stability from accelerated data
Physical stability
Stability in which the product retains appearance, palatability, uniformity, dissolution and suspendability
Chemical stability
Stability in which the product retains chemical integrity and labeled potency within limits
Microbiologic stability
Stability in which the product retains sterility or resistance to growth, with antimicrobials remaining effective
Therapeutic stability
Stability in which the therapeutic effect is unchanged
Toxicologic stability
Stability in which there is no significant increase in toxicity
Stability
Extent to which a product retains, within limits and throughout storage and use, the properties it had at manufacture
Substantial loss of active ingredient, formation of a toxic product, decreased bioavailability
Consequences of instability (list)