1/17
Flashcards defining key carpentry terminology, structural components, and techniques used in roof framing, gable construction, and sheathing.
Rake Rafter
A rafter positioned at the gable end featuring pre-cut notches designed to house the lookouts for the roof overhang.
Mule
A rafter framed without a tail, used where the main roof structure intersects and joins the garage roof.
Ridge Post
A vertical framing support placed under the ridge beam (approximately every 10ft) to prevent it from sagging.
Sway Brace
A permanent diagonal brace nailed to the rafter and ridge framing to hold the ridge plumb without crossing a rafter layout location.
Common Difference
The exact length (583in on a 4 and 12 pitch) by which each consecutive gable stud decreases as it follows the roof pitch.
Lookouts
Horizontal framing lumber (2×4s) running from the first inboard rafter through notches in the rake rafter to support the barge rafter on the overhang.
Barge Rafter
An exterior trim rafter (such as 2×6 cedar) nailed to the outward ends of the lookouts along the gable rake.
Purlin
A horizontal structural member positioned directly beneath over-spanned rafters and braced with notched posts back down to a load-bearing wall.
Glue-Lam Beam
An engineered beam constructed of 2×6 lumber laminated and glued together under pressure, used to carry cathedral ceiling loads.
Pony Wall
A short framed wall situated beneath the high ceiling line in a living room that acts as a purlin for rafters and provides backing for drywall.
Fascia
Exterior finish trim board nailed along the rafter tails to conceal rafter ends and create a straight, finished edge across the roof eaves.
Starter Board
Finish-grade board installed along open eaves beneath the edge of the roof overhang to provide an attractive visible surface from below prior to applying deck sheathing.
Oriented Strand Board (OSB)
An engineered wood panel product (used at 21in thickness) nailed with 8-penny sinkers to form the roof deck sheathing.
Blind Valley
A roof junction formed where a secondary ridge (such as a garage ridge) extends over and ties directly onto the sheathed plane of the main roof.
Jack Rafter
A shortened rafter that spans from the ridge board down to valley support boards, cut with level and plumb cuts matching the roof pitch (1821∘).