1/33
Vocabulary practice flashcards covering watershed hydrology, open channel and pipe flow equations, regulatory frameworks (NPDES, CWA, TDEC), and Low Impact Development (LID) design concepts.
What is the definition of a “watershed”?
An area where all surface runoff drains to a certain outlet.
How do the runoff rate per unit area and runoff volume per unit area generally change as the watershed area increases?
Runoff rate per area decreases as watershed area increases.
Runoff volume per unit area increases as area increases. This is dependent on infiltration and storage
What are some cases in which the watershed area may be very hard to define?
Where there might be underground drainage, urban storm drains, or areas where water crosses the natural watershed boundary.
Know the component of a storm hydrograph inducing the axes. Indicate 3 things (pieces of information) about the storm hydrograph we are generally most interested in.
A storm hydrograph is a graph showing how a river's discharge (volume of water flowing per second) and rainfall change over time before, during, and after a storm.
X-axis is time, Y axis is precipitation/discharge. We are interested in peak discharge, lag time (is it flashy?), and total runoff volume.
Initial Abstraction (Ia)
The surface wetting, infiltration, surface depression storage, and slowing by vegetation that must occur before runoff can begin.
Why does runoff not begin immediately with the beginning of rainfall?
Rainfall first needs to infiltrate the soil and become saturated, then the excess water that is unable to infiltrate will remain on the surface and become runoff. Initial abstraction is the threshold after which runoff begins.
Define time of concentration
The time required for surface runoff to travel from the hydraulically most distant point of the watershed to its outlet or design feature, representing the time at which the entire watershed contributes to runoff.
Design Storm
A hypothetical rainfall depth on which runoff estimation is based, determined by duration and return period.
SCS Direct Runoff Method
Also called the Curve Number Method, it is a method for estimating runoff volume using precipitation depth (P) and Curve Number (CN) as inputs.
Potential Retention (S)
The potential storage or retention capacity of the watershed in the SCS method, calculated as S=CN1000−10.
Rational Method
A peak runoff rate estimation method calculated as q=CiA, where C is the runoff coefficient, i is rainfall intensity in inches per hour, and A is watershed area in acres.
TR55 Method
A runoff estimation method that adds temporary water storage in ponds and swamps along with watershed timing and time of concentration to adjust the peak runoff rate using the formula Qp=qu×A×Q×Fp.
Frequency Method
A mostly empirical method of runoff estimation based on regression analysis of large datasets.
Effective Rainfall
The amount of precipitation remaining after initial losses such as infiltration, interception, and storage, which contributes directly to runoff.
Hydraulic Radius (R)
The ratio of the cross-sectional flow area to the wetted perimeter (R=PA), indicating how much perimeter the water is touching.
Manning's Equation
An open channel flow equation expressed as V=n1.49×R2/3×S1/2, where V is velocity in FPS, n is Manning's roughness coefficient, R is hydraulic radius, and S is channel grade or slope in ft/ft.
Continuity Equation
The hydraulic equation expressed as V=Aq, which must be solved simultaneously with Manning's equation within 10% when designing a channel.
Riprap
Rock protection placed in channels or at outlets to slow down high-velocity water and prevent erosion or scour.
Weir
The least restrictive type of stormwater outlet structure with flow depth, particularly over a shallow range of water depths.
Commerce Clause
The provision of the U.S. Constitution considered the legal basis granting the federal government authority to regulate water pollutants in states due to congressional control over interstate waterways.
Rivers and Harbors Act of 1899
Legislation that makes it a misdemeanor to alter the condition of any port, harbor, channel, or stream without a permit.
Federal Water Pollution Control Act of 1972
The original name of the federal statute from which the Clean Water Act was born.
NPDES
National Pollutant Discharge Elimination System; a regulatory program that requires stormwater discharge permits for construction sites disturbing over 1 acre.
SWPPP
Storm Water Pollution Prevention Plan; a required site plan for controlling stormwater discharges and contaminants on construction sites.
ARAP
Aquatic Resource Alteration Permit.
TDEC
Tennessee Department of Environmental Conservation; the state agency to which the EPA issues permits and which oversees site coverages for construction in Tennessee.
Notice of Coverage (NOC)
The permit authorization issued to a site after a Notice of Intent has been filed and the SWPPP is approved.
Notice of Termination (NOT)
The document that must be requested and officially received to end a site's regulatory coverage under a construction stormwater permit.
MS4
Municipal Separate Storm Sewer System.
Total Suspended Solids (TSS)
Solid particles suspended in stormwater; sites unable to meet runoff reduction guidelines are mandated to achieve an 80% removal goal for these solids.
Total Maximum Daily Loads (TMDLs)
Contaminant reduction standards mandated under the Clean Water Act for states to develop for impaired or contaminated waterways.
Low Impact Development (LID)
A stormwater management approach aimed at mimicking natural hydrology and managing cumulative annual rainfall primarily through infiltration, runoff reduction, and treatment.
Conveyance Practice
An LID drainage feature, such as a grassy swale or channel, that guides stormwater while allowing for infiltration during a storm event.
Capture and Reuse Practices
LID practices designed solely for runoff volume reduction that store water and must have a strong reuse demand to dewater and provide capacity for subsequent storms.