Forensic Traceology: Footprints, Shoeprints, and Electrostatic Lifting

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/17

encourage image

There's no tags or description

Looks like no tags are added yet.

18 Terms

1
New cards

Bases of Footprint Classification

The three criteria used to categorize footprints: 1) by type of trace-forming object, 2) by number of tracks at the crime scene, and 3) by the mechanism of trace formation.

2
New cards

Footprint Classification by Trace-Forming Object

Division of footprints into: 1) footwear marks, and 2) foot marks (which further subdivide into bare feet marks and marks of feet dressed in stockings or socks).

3
New cards

Footprint Classification by Quantity

Categorization of crime-scene footprints based on count into single (isolated) marks or multiple marks.

4
New cards

Footprint Classification by Mechanism of Formation

Categorization of footprints into: A) static and dynamic; B) volumetric (three-dimensional) and surface (two-dimensional, including stratification/deposition, peeling/removal, visible, and invisible traces).

5
New cards

Parts of a Shoe Sole Impression

The three anatomical sections a shoe sole trace is divided into for measurement: 1) forefoot/sole part (подмёточная часть), 2) intermediate/waist part (промежуточная часть), and 3) heel part (каблучная часть).

6
New cards

Shoe Sole Trace Measurements

The seven standard measurements recorded upon detecting a footwear mark: total trace length, length of the sole part, width of the sole part, length of the intermediate part, width of the intermediate part, length of the heel part, and width of the heel part.

7
New cards

Structure of a Bare Foot Trace

The four anatomical components reflected in a bare foot impression: 1) toes (пальцы), 2) ball/metatarsus (плюсна), 3) arch/instep (свод), and 4) heel (пятка).

8
New cards

Bare Foot Trace Measurements

The five required dimensional measurements of a bare foot mark: total foot length, metatarsal width and length, arch width and length, heel width at its narrowest point, and heel width at its widest point.

9
New cards

Technical Equipment for Volumetric Shoeprint Casting

The materials required to recover three-dimensional footwear impressions: gypsum (plaster), water, reinforcing rods or sticks for the internal frame, a mixing container, and thread with paper for an explanatory tag/label.

10
New cards

Gypsum Casting Proportions

Preparation parameters requiring 500–600 g500\text{--}600\,\text{g} of gypsum per individual cast, combined at a ratio of 1 part water to 1–21\text{--}2 parts gypsum (approximately 1 liter1\,\text{liter} of water to 1.5 kg1.5\,\text{kg} of gypsum) to achieve a uniform mass.

11
New cards

Gypsum Hardening Accelerators

Chemical additives such as copper sulfate (медный купорос) or table salt (соль) introduced into the gypsum solution to accelerate setting time.

12
New cards

Two-Stage Casting Procedure

The method of pouring gypsum solution to half the impression's depth, laying reinforcement rods (armature) bearing an attached identifying tag across the layer, and subsequently pouring the remaining mass.

13
New cards

Gypsum Cast Curing Duration

The required hardening interval of 20–25 minutes20\text{--}25\,\text{minutes}, after which the plaster cast is extracted from the impression and gently cleaned of extraneous sand, earth, or clay.

14
New cards

Classification of Particular (Individual) Footwear Characteristics

The categorization of specific shoeprint identifying features into: 1) manufacturing characteristics, 2) repair characteristics, and 3) operational (wear) characteristics.

15
New cards

Manufacturing Characteristics of Footwear

Production-related defects including sole edge trimming gouges, depressions from insufficient mold material, thread seam knots, nail head alignment in molded heel recesses, junction anomalies, edge-to-seam inhomogeneities, and dimensional discrepancies between paired shoes.

16
New cards

Shell-like Delaminations (Раковистые отслоения)

A specific footwear manufacturing defect appearing as shell-like peeling of material caused by local overheating of the injection mold during cast-molding technology.

17
New cards

Footwear Repair Characteristics

Trace features resulting from shoe restoration, such as placement, shape, length, and stitch count of repair seams; quantity of repair nails; size and position of top lifts and metal plates (horseshoes); and altered heel dimensions.

18
New cards

Operational (Wear) Characteristics of Footwear

Features developed during shoe usage, including cracks, scuffs, tears, or chipping of outsole tread elements; localized friction wear (toe, lateral, rear-lateral); embedded foreign particles (gravel, metal shavings, nails); heel deformation;