Experimental Research Methods: Single-Factor, Within-Subjects, and Factorial Designs

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/29

flashcard set

Earn XP

Description and Tags

Flashcards covering factorial designs, main effects, interactions, within-subjects and repeated measures designs, single-factor multiple group experiments, and inferential statistics (ANOVA and post-hoc tests).

30 Terms

1
New cards

What defines a factorial research design?

An experimental research design that includes two or more independent variables, also known as factors.

2
New cards

How is the total number of experimental conditions determined in a factorial design matrix such as a 2×32 \times 3 design?

By multiplying the number of levels of each independent variable; for example, a 2×32 \times 3 factorial design has 22 factors and 2×3=62 \times 3 = 6 conditions.

3
New cards

What is a main effect in a factorial design?

The overall, separate effect of one independent variable on the dependent variable, evaluated across all levels of the other independent variables.

4
New cards

What is an interaction effect in a factorial design, and how is it recognized graphically?

An interaction occurs when the effect of one independent variable on the dependent variable depends on or changes across the levels of a second independent variable; on a line graph, it is visually indicated by nonparallel lines.

5
New cards

In a 2×22 \times 2 factorial table where Factor A has levels A1A_1 (M=20M = 20 at B1B_1, M=30M = 30 at B2B_2) and A2A_2 has M=40M = 40 at B1B_1, what value in the missing cell (A2B2A_2B_2) would produce no main effect for Factor A?

A cell mean of 1010, because the overall mean for A1A_1 is 20+302=25\frac{20 + 30}{2} = 25, and setting A2B2=10A_2B_2 = 10 makes the overall mean for A2A_2 equal to 40+102=25\frac{40 + 10}{2} = 25.

6
New cards

In a 2×22 \times 2 factorial table where Factor A has levels A1A_1 (M=30M = 30 at B1B_1, M=30M = 30 at B2B_2) and A2A_2 has M=40M = 40 at B1B_1, what value in the missing cell (A2B2A_2B_2) results in no interaction?

A cell mean of 4040, because the difference between B1B_1 and B2B_2 remains 00 across both levels of Factor A, keeping the lines parallel.

7
New cards

Why must post-hoc comparisons be performed when an independent variable has more than two levels and the ANOVA yields a significant F statistic?

Because the omnibus FF statistic indicates only that at least one difference exists without specifying which group means differ; post-hoc tests prevent inflation of alpha and protect against familywise or experimentwise Type I error.

8
New cards

In the 2×22 \times 2 ANOVA evaluating therapy type (CBT vs. mindfulness) and gender (male vs. female) on depression reduction, what were the statistical results for the main effects and interaction?

There was a significant main effect of therapy type (F(1,58)=8.21F(1, 58) = 8.21, p=.006p = .006, η2=.12\eta^2 = .12, with CBT producing greater reductions than mindfulness), no significant main effect of gender (F(1,58)=1.70F(1, 58) = 1.70, p=.20p = .20), and a significant interaction (F(1,58)=6.70F(1, 58) = 6.70, p=.012p = .012, η2=.10\eta^2 = .10).

9
New cards

What defines a mixed factorial research design?

A factorial design where at least one factor is manipulated between subjects (different participants assigned to each level) and at least one factor is manipulated within subjects (participants experience all levels of that factor).

10
New cards

What inferential statistical analyses correspond to a 2×22 \times 2 between-subjects design, a 2×22 \times 2 within-subjects design, and a 2×22 \times 2 mixed factorial design?

A 2×22 \times 2 between-subjects design uses a two-way between-groups ANOVA; a 2×22 \times 2 within-subjects design uses a two-way repeated measures ANOVA; and a 2×22 \times 2 mixed design uses a two-way mixed ANOVA.

11
New cards

In the job applicant rating exercise examining gender (male vs. female) and communication style (assertive vs. passive), what were the cell ratings and the resulting pattern of effects?

Ratings were: Male Assertive = 44, Male Passive = 22, Female Assertive = 33, Female Passive = 33. There was a main effect of communication style (M=3.5M = 3.5 vs. M=2.5M = 2.5), no main effect of gender (M=3.0M = 3.0 for both), and an interaction because communication style influenced ratings for male applicants but not female applicants.

12
New cards

In the teacher evaluation exercise (Young: Strict = 33, Lenient = 44; Old: Strict = 55, Lenient = 33), why does an interaction effect occur?

Because the effect of teaching style reverses depending on age: young teachers receive higher competence ratings when lenient (44 vs. 33), whereas older teachers receive higher competence ratings when strict (55 vs. 33).

13
New cards

Where does the University of Virginia preschool milk and obesity study fall along the scientific control continuum, and why?

It falls under non-experimental correlational/descriptive research with low scientific control because researchers observed existing milk-drinking habits and weight changes across nearly 11,00011{,}000 children without random assignment or experimental manipulation.

14
New cards

In the study by Desrochers and Shelnutt (2012) on answer format (word vs. letter) and review method (automated vs. manual), what were the learning gain score results?

A mixed 2×22 \times 2 ANOVA revealed significantly higher mean percent gain scores in the word condition (M=18.56M = 18.56, SD=34.08SD = 34.08, SE=4.07SE = 4.07) than in the letter condition (M=7.73M = 7.73, SD=28.26SD = 28.26, SE=3.40SE = 3.40), with F(1,68)=5.52F(1, 68) = 5.52, p<.05p < .05.

15
New cards

In Langer et al.'s (1978) copier field experiment, what proportion of participants complied when given a small request across the three excuse conditions?

Compliance was 0.600.60 with no excuse, 0.930.93 with a senseless excuse, and 0.940.94 with a reasonable excuse.

16
New cards

In the cup-stacking 2×22 \times 2 within-subjects experiment (Hand: dominant vs. nondominant; Vision: eyes open vs. eyes closed), what main effects and interaction were observed?

There was a main effect of hand (M=27M = 27 cups dominant vs. M=16M = 16 nondominant), a main effect of vision (M=26M = 26 eyes open vs. M=17M = 17 eyes closed), and a Hand ×\times Vision interaction because closing the eyes produced a larger reduction in stacking performance for the nondominant hand than for the dominant hand.

17
New cards

What is a within-subjects (repeated measures) experimental design?

A research design where the same group of participants is exposed to all conditions or levels of the independent variable, yielding multiple scores per participant.

18
New cards

What are the primary statistical and methodological advantages of a within-subjects design?

It requires fewer participants, costs less, guarantees group equivalency, and increases statistical power by eliminating error variance caused by individual participant differences.

19
New cards

What are the primary disadvantages and internal validity threats associated with within-subjects designs?

Susceptibility to demand characteristics, participant attrition/mortality, time-related threats (history, maturation, instrumentation, regression), and order effects (progressive error, practice/testing effects, fatigue, sensitization, and carryover effects).

20
New cards

How does complete counterbalancing differ from partial counterbalancing using a Latin Square?

Complete counterbalancing presents every possible sequence of conditions (n!n! total orders), whereas a Latin Square uses a subset of orders arranged so that each condition appears at each ordinal position and precedes and follows other conditions equally.

21
New cards

In Hu et al.'s (2006) within-subjects study on sleep and emotional memory, what distinguished a 'Know' judgment from a 'Remember' judgment?

A 'Know' judgment meant the participant knew the picture had been presented previously but could not recollect contextual details, while a 'Remember' judgment meant the participant consciously recollected seeing the specific picture during the prior study phase.

22
New cards

How does a matched pairs design assign participants to experimental conditions?

Participants are first measured and matched into pairs based on a specific relevant characteristic, and then each member of the matched pair is randomly assigned to only one level of the independent variable.

23
New cards

What defines a single-factor multiple group experimental design?

A between-subjects design comparing more than two conditions or groups on a single independent variable, where each participant belongs to only one condition and contributes one score.

24
New cards

What are the primary advantages of testing more than two levels of an independent variable?

It allows researchers to identify curvilinear or non-linear relationships, provides a better estimate of dosage/treatment effects, rules out confounding explanations, and maps functional relationships more accurately than a two-level design.

25
New cards

What conceptual formula defines the F ratio in a one-way between-groups ANOVA?

F=Between-groups variabilityWithin-group variabilityF = \frac{\text{Between-groups variability}}{\text{Within-group variability}}, representing the ratio of treatment effect plus error to pure error variance.

26
New cards

What formulas define the degrees of freedom between groups (dfB\text{df}_B) and within groups (dfW\text{df}_W) in a one-way ANOVA?

dfB=k−1\text{df}_B = k - 1 (where kk is the number of groups) and dfW=N−k\text{df}_W = N - k (or (N−1)−(k−1)(N - 1) - (k - 1), where NN is the total sample size).

27
New cards

What are the core assumptions required to conduct a one-way between-groups ANOVA?

An independent groups design, a continuous dependent variable measured on an interval or ratio scale, and distributions with approximately equal variances (homogeneity of variance).

28
New cards

In Desrochers et al. (2007), what were the findings comparing solitary, cooperative, and competitive testing conditions?

Scores differed significantly across conditions (F(2,41)=7.88F(2, 41) = 7.88, p<.001p < .001); Tukey post-hoc tests showed that Cooperative Testing (M=64.8%M = 64.8\%, SD=13.2SD = 13.2) and Competitive Testing (M=60.2%M = 60.2\%, SD=17.0SD = 17.0) produced significantly higher scores than Solitary Testing (M=47.7%M = 47.7\%, SD=18.1SD = 18.1).

29
New cards

In the room temperature experiment assessing typists' performance (55∘55^\circ, 60∘60^\circ, 65∘65^\circ, 70∘70^\circ, 75∘75^\circ, and 80∘80^\circ), what were the overall ANOVA result and the optimal temperature?

A one-way ANOVA showed a statistically significant effect of temperature on typing speed (F(5,42)=5.51F(5, 42) = 5.51, p<.01p < .01), with 65∘65^\circ yielding the fastest mean speed (M=70.0000M = 70.0000, SD=9.35032SD = 9.35032).

30
New cards

According to the APA-style term project guidelines, how must the main heading and subheadings of the Method section be formatted?

The main heading 'Method' must be bold, centered, and singular (no 's'); the required subheadings ('Participants', 'Materials and Apparatus', 'Setting', 'Research Design', 'Procedure') must be bold and left-justified.