1/24
Vocabulary flashcards covering air, water, solid waste, noise, thermal, and radioactive pollution controls, along with multi-stage industrial effluent treatment systems in pharmaceutical manufacturing units.
Pollution
The introduction of contaminants into the environment that cause harm or discomfort to humans or other living organisms, or that damage the environment in the form of chemical substances or energy such as noise, heat, or light.
Environmental Pollution
The contamination of physical and biological components of the earth/atmosphere system to such an extent that normal environmental processes are adversely affected.
Air Pollution
An atmospheric condition in which substances such as gases, particulate matter, and radioactive substances are present in concentrations that cause undesirable effects on the human environment.
Primary Air Pollutants
Pollutants emitted directly into the atmosphere, including CO, CO2, NO2, SO2, volatile organic compounds (hydrocarbons), and suspended particulate matter.
Secondary Air Pollutants
Pollutants formed in the atmosphere through chemical interactions among primary pollutants, including sulfuric acid, nitric acid, and carbonic acid.
Preventive Air Pollution Control Techniques
Methods to eliminate or collect pollutants prior to release, including the use of scrubbers, dry and wet collectors, filters, electrostatic precipitators, and building higher stacks for air discharge.
Effluent Control Techniques (Air)
Methods focusing on source reduction, including substituting highly polluting raw materials with cleaner alternatives and utilizing non-conventional fuels like Gobar gas, Biogas, CNG, and LPG.
Electrostatic Precipitator
A high-energy particulate collection device where electrodes impart a negative charge to particles so they are attracted to positively charged plates and collected in hoppers.
HEPA Filter
A high-efficiency particulate air filter used for removing sub-micron particles and reducing the concentration of airborne allergens.
Solid Waste
All solid discardant materials that are improperly discarded in manufacturing, such as used chemical containers, packages, and process residues.
Noise
Unwanted sound in the wrong place at the wrong time, often generated in pharmaceutical manufacturing by ball mills, sieving machines, roller compactors, and tablet punching machines.
CPCB Noise Limit (Industrial Area)
The standard permissible noise level set by the Central Pollution Control Board for industrial areas: 75dBA during the day and 70dBA during the night.
CPCB Noise Limit (Silence Zone)
The standard permissible noise level set by the Central Pollution Control Board for silence zones: 50dBA during the day and 40dBA during the night.
Thermal Pollution
The presence of waste heat in water that causes undesirable changes in the natural environment and decreases atmospheric dissolved oxygen levels.
Wet Cooling Tower
A cooling device where cool air entering from the sides takes away heat to cool circulating water, accompanied by large amounts of water loss due to evaporation.
Dry Cooling Tower
A cooling system that operates without any water loss, though its installation and operation costs are significantly higher than those of a wet cooling tower.
Somatic Radiation Damage
Non-heritable physical injury caused by ionizing radiation, including burns, miscarriages, eye cataracts, and cancers of the bone, thyroid, breast, lungs, and skin.
Water Pollution
The presence of chemical, physical, biological, or radioactive contaminants that adversely impair the beneficial uses of water.
Wastewater Pre-treatment
The initial wastewater treatment phase involving equalization, neutralization, and grease, oil, and toxic substance removal to prevent damage to sensitive downstream plant equipment.
Primary Wastewater Treatment
The treatment stage utilizing screens, grit chambers, and gravity sedimentation tanks to remove settable solids and reduce the overall load for subsequent biological processing.
Secondary Wastewater Treatment
A biological treatment stage designed to substantially degrade the biological content of sewage via processes like activated sludge, trickling filtration, and oxidation ponds.
Activated Sludge Process
A secondary wastewater treatment system where settled sewage is mixed with aerated biological sludge in an aeration tank, followed by sedimentation in a secondary clarifier and sludge recycling.
Tertiary Wastewater Treatment
The final effluent polishing step applied when secondary treatment is unsatisfactory, employing coagulation, flocculation, co-precipitation, membrane separation, adsorption, and ion exchange.
Effluent
An out-flowing stream of water or gas from a natural water body or artificial facility, formally defined by the US EPA (2006) as treated or untreated wastewater emerging from a treatment plant, sewer, or industrial outfall.
Effluent Bioassay Test
A biological effluent quality standard that requires at least 90% survival of fish after 96hrs of exposure to 100% effluent.