1/114
Looks like no tags are added yet.
Whatwould be the bestpre-surgicalantibioticprotocolregimenfor a penicillin allergic patient?
a.Clindamycin 1200mg 2hrs pre-operative followed by 600mg tid for7 days
b.Augmentin500mg 1 hr pre-operative followed by 500mg for 24 hours
c.Amoxicillin 2000mg1 hr pre-operative followed by 1000mg tid for 5-7 days
d.Clindamycin 600mg 1 hr pre-operative followed by 300mg tid for1 day
d.Clindamycin 600mg 1 hr pre-operative followed by 300mg tid for1 day
The advantage of a papilla sparingincision is that:
a.The clinician can perform this more quickly saving time and money and this procedure is more often performed in the non esthetic zone.
b.The clinician can make a complete sulcular incision around the adjacent teeth to examine the roots for periodontal disease
c.The papilla is less likely to recede and cause black triangles.
d.The papilla is more likely to recede and allow for the use of interproximal periodontalbrushes into large embrasure spaces
c.The papilla is less likely to recede and cause black triangles.
The use of steroids pre-operatively in implant dentistry in mainly indicated to:
Help the patient relax
Decrease post operative edema, swelling and nausea
decrease the risk of sedation
treat acute infection
b.Decrease post operative edema, swelling and nausea
The main anatomic structure the implant surgeon needs to be aware of in the posterior mandible area if he/she perforates the boney plate of the jaw is the:
The greater palatine nerve
The buccal nerve
The maxillary artery
The lingual artery
The lingual artery
The most commonly recommended minimum distance between the implant and adjacent tooth is:
4-5 mm
6-7mm
1.5-2mm
0.25mm-0.5mm
1.5-2mm
The platform on an implant placed in an esthetic zone should be placed at:
5 mm apical to the adjacent teeth CEJ
5 mm below the crestal bone regardless of its height
2 mm apical to the adjacent teeth CEJ
1 mm coronal to the adjacent teeth CEJ so that the machined collars are exposed and cleansable
2 mm apical to the adjacent teeth CEJ
What is the most commonly recommended minimum spacing between two adjacent implants?
a. 1-2 mm
b. 3- 4mm
c. 5-6mm
d. 7 or more mm
b. 3- 4mm
The purpose of a surgical template made from a dental stone model is that it:
a. Allows us to evaluate the volume of bone
b. Provides the clincian with the proper angulation for our implant
c. Helps to give us the proper position of our implant platform
d. Allows us to place the implant without evaluating our implant position in the mouth and eliminates the use of intraoperative radiographs.
c. Helps to give us the proper position of our implant platform
Where should the occlusal contacts be on an implant crown
a. On the buccal aspect of the occlusal surface
b. On the distal aspect of the occlusal surface
c. On the central fossa of the occlusal surface if it produces apical forces on the implant
d. The contact can be anywhere because this is an implant crown
c. On the central fossa of the occlusal surface if it produces apical forces on the implant
After taking an implant impression we try in the abutments and the metal substructures (castings for the porcelain to metal crowns). The metal substructure does not fit. What are the best and most efficient next steps.
a. Take a new fixture level impression and send it back to the lab to remake a whole new substructure
b. Take an abutment level impression in the mouth
c. Section the metal framework, fixate with GC resin and take a pickup impression
d. Order duplicate abutments and make a new metal substructure
c. Section the metal framework, fixate with GC resin and take a pickup impression
Which of the following is not an advantage for cementable restorations compared to screw retained restorations:
a. Less screw loosening and screw fractures
b. Better gingival health
c. Improved esthetics
d. Greater retention in a restoration with little interocclusal space
d. Greater retention in a restoration with little interocclusal space
Which statement about bar overdentures is false:
a. You need a passive fit for the bar
b. You need at least 8mm between implants for a full sized hadar clip
c. The implant bar engages the internal hex of every implant in the restoration
d. An implant bar can be attached directly to the implants or can attach to transmucosal abutments (TAC's or tapered abutments)
c. The implant bar engages the internal hex of every implant in the restoration
What is the minimum recommended level to keep implants and surgical drills above the inferior alveolar canal in the posterior mandible (safety zone)?
5mm
13mm
2mm
0.25mm
2mm
Osteotomes surgical instruments are used for:
Bone Spreading
Sinus Lift elevation
Compressing cancellous bone and packing particulate bone graft material
All of the above
All of the above
The most common direction of angulation of the surgical drill during placement in the partially edentulous posterior mandible is:
Directing towards the lingual and mesial
Directing towards the lingual and buccal
Directing towards the distal and buccal
Directing towards the occlusal and mesial
Directing towards the distal and buccal
The advantage of a direct impression or open tray impression is that:
a. It is easier to do than an indirect impression because you utilized short screws
b. It is good for the gagging patient because the abutments stick up and keep the mouth open
c. You don't need adhesives for the tray and don't have to open the tray for access to screws.
d. It can be utilized for flaring angulations (diverging implants or tilted implants) so as to prevent impression tearing upon removal of the impression tray
d. It can be utilized for flaring angulations (diverging implants or tilted implants) so as to prevent impression tearing upon removal of the impression tray
The advantage of a closed tray or indirect impression is that:
a. you don't have to modify the stock tray with occlusal openings and the connection of the implant analogs is more simple than direct impression methods
b. it is easy to take at the time of implant placement surgery
c. this technique doesn't require unscrewing the transfers before removal of the impression
d. all of the above
d. all of the above
he amount of space recommended between the crest of the bone and the incisal edge of the overdenture prosthesis to allow for bar, attachment and denture construction is:
5-7mm
11-13mm
14-16mm
22-25mm
14-16mm
The advantage of a multiple unit splinted cementable porcelain to metal restoration over a screw retained multiple unit restoration is:
They have large screw openings which are not esthetic or food traps
They allow for an easier passive fit
They can be solder indexed which cannot be done with screw retained prosthesis
They leave unsupported porcelain which is likely to fracture
They allow for an easier passive fit
While performing implant surgery during the drilling procedure the clinician:
needs to determine the direction of drilling
needs to be aware of the bone density in the surgical area to utilize the soft and hard bone drilling guidelines
needs to maintain a minimum of 0.5mm-1.0mm bone on the buccal and lingual area surrounding the implants
all of the above
all of the above
When performing stage II uncovery surgery the clinician needs to do all of the following except:
perform an incision which maximizes the keratinized tissue to create an attached gingival margin
be careful not to remove too much tissue on the facial with the punch techniques
consider performing papilla sparing incisions in the esthetic zones.
Use standard monopolar electrosurgery units to uncover implants by gingivectomy
Use standard monopolar electrosurgery units to uncover implants by gingivectomy
(has to be Bipolar or the current with
During socket grafting procedures the clinician should try to;
atraumatically extract the tooth without a flap
always flap the surgical site to make sure he can clean out any buccal plate infection
utilize grafts only when not doing implants
all of the above
atraumatically extract the tooth without a flap
Membranes materials with a resorption period of 8 weeks to 18 weeks (such as Biomend ® materials,) are used for:
Guided tissue regeneration procedures such as lateral ridge augmentation
Maintaining the space on the facial plate of an extraction site
Can be made from type I collagen obtained from bovine
All of the above
All of the above
The 1.25mm hex tool in the Zimmer Dental surgical kit is used for:
insertion of transfer impression posts
removing cover screws
torquing permanent abutments
all of the above
all of the above
The benefits of immediate implants are:
you can perform them with a second surgical procedure and they are so simple
the failure rate is less than stage II standard implant surgery
the healing rates are quicker and this procedure allows the clinician to evaluate bone healing
you can provide the patient with a provisional on the day of surgery
you can provide the patient with a provisional on the day of surgery
The benefits of splinting multiple dental implants is all of the following except:
the patient can floss
the occlusal load is shared on many implants particularly the posterior areas
there are some reports of 50% less screw loosening on abutments
the porcelain contacts between single implants are hard to produce a passive fit
the patient can floss
The benefits of a custom milled abutment (Patient Specific Abutments or Atlantis ® abutment) are all of the following except:
the abutments are computer generated and allow for precision custom fabrication
they are more esthetic than prefabricated zirconium abutments parallelism between multiple units is simplified
contours of the abutments can be easily fabricated to support the soft tissue
they are more esthetic than prefabricated zirconium abutments
True or False:
It has been documented in the literature that the average life span of conventional crown and bridge is 74% for 15 years.
True
The advantages of dental implants are all of the following except:
a. Teeth are positioned for esthetics
b. Improved phonetics and Improved retention
c. Are very easy to obtain esthetics in the anterior maxillary
d. Improved success of prosthesis
c. Are very easy to obtain esthetics in the anterior maxillary
As the bone resorbs all of the following changes occur except for the following:
The bone will resorb from palatal to buccal direction
The bone will decrease by approximately 40% during the first year after tooth removal without grafting
The bone will resorb and lose width before height.
The ridge will resorb more quickly with the function of a removable prosthesis
The bone will resorb from palatal to buccal direction
Which one of the following is not an endosseous implant
Basket root form implant
Zygomatic implant
Taper screw type implant
Plate form (blade) implant
Subperiosteal implant
Subperiosteal implant
Which of the following surfaces is least likely to osseointegrate:
HA plasma sprayed
Machined Titanium
HA Blasted titanium
Polished Titanium
Acid Etched Titanium
Polished Titanium
Which type of implant surface is best suited to be exposed to the oral environment
titanium plasma sprayed surface
HA coated surface
Machined surface
Acid etched surface
Machined surface
The name which best describes the implant component which passes through soft tissue from the implant to the oral environment is the:
implant body
fixation screw
permucosal abutment or healing abutment
cover screw
permucosal abutment or healing abutment
The theory that bone is a living structure and remodels in response to forces applied to it is most often credited to:
Dr. Perv Branemark's rules of bone
Wolfe's Law
Anterior Posterior Spread Law
Osseointegration principle
Wolfe's Law
All of the following are a criteria for an implant considered to be a successful (Criteria for success) except for:
rigid fixation
lack of crestal bone loss less than 0.2mm after the first year of function
esthetic outcome
probable pocket depths 7mm
probable pocket depths 7mm
Which one of the following would indicate a failing implant
mobility of 75um (less than 0.1mm)
5mm pocket interproximally without exudates
Pain only upon percussion
Gingival recession of the machined or polished collar
Pain only upon percussion
When you encounter a failed implant the best course of treatment is to:
a. bone graft the area
b. treat the pocket with antibiotics (arestin ®) and curettage
c. take the restoration out of occlusion
d. remove the implant
d. remove the implant
Inflammation around an implant in function for more than 2 years with bone loss of less than 0.1mm since placement would be best described as:
failing implant
healthy implant
periimplantitits
failed implant
periimplantitits
When examining a patient for dental implants the patient with a history of periodontal disease should be informed of the following:
a. there is no need to have to continue to perform periodontal home care and routine periodontal treatment because implants are not affected by bacteria
b. the periodontal patient may be at an increased risk for failure for dental implants as compared to the patient who lost their teeth with caries
c. they should not worry about treating any existing periodontal condition prior to implant therapy
d. none of the above
b. the periodontal patient may be at an increased risk for failure for dental implants as compared to the patient who lost their teeth with caries
All of the following are normal adult vital signs except for the following:
blood pressure - 120mmHg over 80mm Hg
pulse rate - 140 beats/ minute
Temperature - 98.6 to 99.2 degree F
Respirations - 16 to 20 breaths/ minute
pulse rate - 140 beats/ minute
WNL: 60-100 bpm
Which test lab value order would be useful in accessing the patients anemic condition
White blood cell count
Hemoglobin level
Creatinine level
BUN (blood urea nitrogen) level
Hemoglobin level
After reviewing the patient medical history you notice that the patient is taking one of the following medication that may affect bleeding.
aspirin
plavix ®
coumadin
all of above
all of above
The patient who has a history of previous endocarditis and is at increased risk should be given the following AHA recommended antibiotic prophylaxis:
gentamycin 2g orally 1 hr prior to treatment
minocylcine 200mg orally 1hr prior to treatment
amoxicillin 2g 1 hr prior to treatment
newer recommendations by the AHA no longer require this patient to have antibiotic coverage
amoxicillin 2g 1 hr prior to treatment
All of the following are medical contraindications to performing dental implant surgery except for the following:
uncontrolled diabetes with a blood glucose level of 290mg/dl
hypothyroidism
pregnancy
fibrous dysplasia
hypothyroidism
When considering implant surgery for a patient which is the best age to place an implant in a male.
14 years old
15 years old
7 years old
22 years old
22 years old
Smoking causes an increase risk and failure rate with dental implant surgery because of all of the following except:
decrease capillary blood flow
increased phagocytic activity
lower chemotactic migration
decreased PMN (polymorphonucleocytes)
increased phagocytic activity
Mandibular flexure is important to consider because of all of the following except::
a. it represents movement of 0.8mm in the mandibular 1st molar areas and could affect cross arch splinting of rigid implants
b. it is not as important as splinting implants to natural teeth since it is less movement than that
c it still allows for us to place implants and splint them in the anterior symphysis area between the mental foramina
e. Mandibular flexure could be 10 to 20 times greater than healthy teeth
b. it is not as important as splinting implants to natural teeth since it is less movement than that
An FP- 3 fixture is best described as:
a. a removable prosthesis which is implant supported
a fixed prosthesis which looks like a healthy tooth
a fixed mini pin with 3 prongs
fixed prosthesis with has soft tissue replacement within the prosthesis
fixed prosthesis with has soft tissue replacement within the prosthesis
FP-1: replaces anatomical crown (no pink)
FP-2: replaces anatomical crown and root portion (long teeth)
FP-3: replaces crown and soft tissue (artificial pink)
properly designed mandibular implant overdenture with 2 ball attachments would best be classified as a:
FP-1
FP-2
RP-4
RP-5
RP-5
RP-4: fully implant supported
RP-5: Implant and soft tissue supported
Which of the following would be most accurate in diagnosis of the bone length available for implant placement
occlusal radiograph
panoramic radiograph
digital periapical radiograph
cephalometric radiograph
digital periapical radiograph
A surgical guide stent for flapless implant surgery can be constructed from which of the following:
lateral cephalometric radiograph
Tomograph
CAT Scan with a pre-radiographic diagnostic wax up or appliance (radiopaque guide or radiopaque markers)
Well trimmed study model
CAT Scan with a pre-radiographic diagnostic wax up or appliance (radiopaque guide or radiopaque markers)
D3 density bone is in the range of:
greater than 1250 Hounsfield units
850-1250 Hounsfield units
350-850 Hounsfield units
350-850 Wolf's units
350-850 Hounsfield units
D1: >1250
D2: 850-1250
D3: 350-850
D4: 150-350
D5:
Division B bone is best described as:
5.0mm wide and 10mm length
2.5 mm wide and 10mm length
Unfavorable height
Totally deficient bone in height and width
2.5 mm wide and 10mm length
Division A bone is best suited for:
mini implants
root form implants
plate form implants
subperiosteal implants
root form implants
Subperiosteal implants are best suited for:
Division A bone
Division B bone
Division C-w unfavorable width bone
Division D bone
Division D bone
All of the following are options for treatment of Division B to allow for standard root form implant placement except for:
osteoplasty the ridge and lower to widen the bone
bone manipulation or spreading
onlay particular bone grafting with a membrane
osteogenic distraction
osteogenic distraction
D4 bone density is best described as:
fine trabecular bone (fine cancellous bone)
dense cortical bone
thick dense to porous bone
an area where implants are easily immediately loaded
fine trabecular bone (fine cancellous bone)
Progressive loading is usually indicated for which scenario:
D1 bone with multiple splinted implants
D2 bone with multiple splinted implant
D4 with 1-2 implants or a single molar
D1 bone with implants with a good A-P spread
D4 with 1-2 implants or a single molar
The implant attachment differs from the tooth attachment in the following way:
hemi-desmosomes attach directly to the implant but not to the tooth structure
the connective tissue fibers are less in number than around the tooth
the pockets depths are usually less around implants than teeth
the sulcular epithelium is non-keratinized in implants but keratinized in teeth
the connective tissue fibers are less in number than around the tooth
According to an article published in the 1990's by Charles English, the principle of Anterior Posterior Spread (A-P Spread) was for which one of the following:
A. a principle to measure the amount of torquing an implant abutment can undergo
B. a principle to measure the stress strain relationship within the bone
C. a principle to allow anterior posterior width measurement on a single abutment
D. a principle to help the dentist determine the amount of cantilever in a prosthesis depending upon the distance between the most anterior and posterior splinted implants in a restoration
D. a principle to help the dentist determine the amount of cantilever in a prosthesis depending upon the distance between the most anterior and posterior splinted implants in a restoration
Anterior Posterior spread (A-P Spread) as described by Charles English presented the following calculations for A-P spread:
a. allows for posterior cantilever in the mandible 2.5 times the A-P spread of the most anterior to posterior implant
b. allows for anterior cantilever in the maxilla 1 times the A-P spread of the most anterior to posterior implant
c. allows for anterior cantilever in the mandible 1.5 times the A-P spread of the most anterior to posterior implant
d. all of the above
d. all of the above
The Ostium, located in the maxillary sinus, is described as:
a. located upper 1/3 medial wall and drains into middle meatus
b. may be at any point along the ethmoid infundibulum, usually the post. 1/3
c. is usually 2.4mm in size
d. all of the above
d. all of the above
Because of the low density in the posterior maxilla (D4 bone) which of the following recommendations would not apply:
the clinician should try to increase the amount (number) of implants in this area
the clinician should splint implants to reduce the stress to the bone
the clinician should place wide body implants to increase the surface area
the clinician should utilize mini-pins to avoid the sinus.
the clinician should utilize mini-pins to avoid the sinus.
Sinus elevation of the SA-2 type (Misch) and described by Summer's Techniques is a technique whereby the clinician:
a. makes an incision towards the palate, reflects a full thickness mucoperiosteal flap and makes a lateral window for bone grafting without implant placement
b. makes an incision towards the palate, reflects a full thickness mucoperiosteal flap and makes a lateral window for bone grafting and places the implants at the same time.
c. Makes an incision and utilizes osteotomes to greenstick fracture upwards into the sinus and place implants at the same time
d. Utilized bone spreaders to widen the division B ridge.
c. Makes an incision and utilizes osteotomes to greenstick fracture upwards into the sinus and place implants at the same time
While performing implant surgery in the anterior maxilla, the clinician needs to be careful of the nasopalatine nerve because:
incision of this structure will cause excessive hemorrhage requiring transfusions
incision of this structure will cause paresthesia to the nose
encroachment on this structure will cause a bony defect on a central incisor implant
none of the above
encroachment on this structure will cause a bony defect on a central incisor implant
When prescribing medications after sinus graft surgery, which of the following medications has been shown to have any benefit except for:
antibiotics
steroids
antihistamines
decongestives
antihistamines
Which of the following materials would be considered an osteoconductive material?
allograft
ceramic alloplast
autogenous bone chips
Synthetic Polymer Spheres (Bioplant ®)
all of the above
all of the above
Which of the following materials would be considered an osteoinductive material?
Mineralized allograft (Large Cortical Puros ® particles)
Resorbable HA alloplast (Ostetogen ®)
Resorbable HA xenograft (Bio Oss ®)
Dense HA synthetic alloplast (Osteograft D-700)
Demineralized Freeze Dried Bone allograft (Puros ® Putty)
A and E
A and E
Which of the following particulate grafting materials would not be considered an alloplast?
Bioactive Ceramic (Osteogen ®)
Demineralized freeze dried bone (DMFDB)
Bioplant ® HTR (acrylic particular grafting material)
Dense HA (Osteograf D-700)
Demineralized freeze dried bone (DMFDB)
During an extraction socket grafting procedure, it has been recommended in the literature to create bleeding points for the following reason.
the bleeding points help supply blood cells to the socket graft material
the procedure causes Rapid Acceleratory Phenomena to promote healing
this allows for perforation through the dense cortical bone surrounding the extraction socket to gain access to cancellous bone surrounding the socket
all of the above
all of the above
When preparing the patient for implant surgery all of the following should be considered except:
antibiotic prophylaxis has been shown in the literature to be effective in increasing implant survival rates
chlorhexidine rinses prior to implant surgery can decrease the amount of pathogens during surgery
betadine (Povidine alcohol solution preparations) and sterile draping are essential to the success of implant surgery
sterile instrumentation and aseptic surgical techniques are important to prevent against infections
betadine (Povidine alcohol solution preparations) and sterile draping are essential to the success of implant surgery
Before performing dental implant surgery, the clinician should have a diagnostic wax up and surgical guide because of all of the following except:
This allows the surgeon to plan the implant positioning before and during surgery
This allows the surgeon to evaluate the interarch space requirements prior to any surgery
This allows the dentist to place less implants
This allows the surgeon to place implants so they are in the correct tooth position
This allows the dentist to place less implants
The safety zone (safe amount of length above the mandibular canal) can be determined by each of the following except for:
Panoramic radiographs and intra operative radiographs
Water's view radiographs
Reformatted CAT scans
Simplant ® program
Exposure of a flap and identification of the mental foramina
Water's view radiographs
A patient presents to your office and reveals they have starting taking oral bisphosphonate medication (Fosemax ®) for the first time and started 6 months ago. Based on the latest evidence you should do which of the following:
Inform the patient that they might be at an increased risk for Bone Osteonecrosis (BON) and not perform any implant dentistry procedures.
Order a beta- HCG test
Refer the patient to their physician and have medical clearance is absolutely required
Inform the patient that they are at a low risk for BON and treat the patient as you would for any other patient.
Inform the patient that they are at a low risk for BON and treat the patient as you would for any other patient.
While performing implant surgery in the maxilla the clinician experienced D4 bone during the pilot drilling in a ridge which is 9.4mm wide. The clinician should then consider the following except:
Drill with the pilot drill and take a check film
utilize the complete drilling sequence in preparing the osteotomy
consider utilizing osteotomes (bone spreaders) to compact the bone
consider utilizing a taper implant to compress bone during placement
utilize the complete drilling sequence in preparing the osteotomy
A clinician places two implants in the area of #29 and #30 utilizing a flap from the area of #27 to #31 to visualize the mental nerve without complication in D2 bone. Post operative panoramic radiographs of the implants at the time of surgery show excellent safety zone placement (4mm above the nerve). Two days later the patient returns for a post operative visit with a complaint of slight numbness, pain and swelling in the area. The clinician should do which of the following:
take a radiograph and confirm the position of the implant
switch antibiotics because the patient shouldn't have so much swelling at this time
call you malpractice carrier
assure the patient that they are exhibiting some common post operative sequela and that you will monitor their symptoms over the next one to two weeks to make sure healing is normal
assure the patient that they are exhibiting some common post operative sequela and that you will monitor their symptoms over the next one to two weeks to make sure healing is normal
The clinician places some two stage implants in the non-esthetic zone of #3 and #4 in the patient with a low lip line. The patient returns in one week for a post operative visit and the implant cover screws are completely exposed to the oral environment. The clinician should do which of the following:
anesthetize the patient with local and resuture the flaps with tension free closure
instruct the patient to gently clean the cover screws and follow up post op in one week
remove the cover screws and torque in abutment and "load" the implants
be concerned that improper healing will occur because the cover screws are completely exposed
instruct the patient to gently clean the cover screws and follow up post op in one week
Which of the following is an advantage of a Laser Welded Implant overdenture:
the laser welded bar has more miscasting than a cast bar
the laser welded bar is more cost effective than a noble cast bar
the laser welded bar can be soldered and the cast bar cannot be soldered
the laser welded bar can only be used for short span implant cases
the laser welded bar is more cost effective than a noble cast bar
While performing extraction socket grafting the clinician encounters a lost facial bony plate. The clinician should perform which of the following according to recent publications
( Elian et al PPAD 2007):
graft directly into the socket without any bleeding points
place a barrier membrane in the facial portion and occlusal portion of the socket in conjunction to grafting the socket
make a full thickness flap and try to obtain tension closure
none of the above
place a barrier membrane in the facial portion and occlusal portion of the socket in conjunction to grafting the socket
After performing socket grafting the clinician can place a wound dressing over the extraction socket to prevent particles from exfoliating. Which of the following is true of the wound dressing such as Collatape ® ?
the wound dressing resorbs in about 8 days
the wound dressing must be sutured to the tissues
Collatape ® is made from Bovine product
A and C
A and C
The main advantage of a computer milled abutment vs. a cast abutment is:
a computer milled abutment is much less expensive
a computer milled abutment does not usually involve laboratory misfits
a computer milled abutment is not as accurate for paralleling a 6 implant splinted case
you can only use a closed tray impression for a computer milled abutment
a computer milled abutment does not usually involve laboratory misfits
An autogenous block graft would be an indicated and useful procedure for which of the following:
socket grafting
sinus grafting such as an Summer technique
Division B ridge conversion to a Division A ridge
None of the above
Division B ridge conversion to a Division A ridge
A Soft Tissue Allograft would be indicated and useful for which type of procedure:
periodontal root coverage
sinus grafting
Soft tissue augmentation "plumping" on the facial of an implant
A and C
A and C
For Stage II uncovery implant surgery in a non esthetic area with adequate keratinized tissue all of the following are acceptable except:
dermal punch technique
non papilla sparing incision
electrosurgery (older non-bipolar units)
diamond bur uncovery
electrosurgery (older non-bipolar units)
The RTT (Reverse Torque Test) as described by Carr and Larson 1995, refers to which of the following:
utilizing a tool which rotates clockwise and measures 50nc of force
defined as the use of a counterclockwise torque test of 50-90 n-cm of force
defined as the use of a counterclockwise torque test of 10-20 n-cm of force
none of the above
defined as the use of a counterclockwise torque test of 10-20 n-cm of force
Your patient comes to the office after a trip to Europe with her implant cover screw exposed to the oral environment at 5 month post op. The periapical radiographs appears normal to 13mm length. During the Stage II uncovery the clinician discovers a large osseous defect on the buccal bone to the last thread. Which of the following would be considered acceptable:
wash the implant with sterile H2O and bone graft
decontaminate the implant with CO2 laser use a collaplug to cover the buccal
remove the implant and graft the implant socket
yell at the patient for not returning after 3 months
remove the implant and graft the implant socket
When performing implant surgery on the severely resorbed mandible the clinician is careful not to reflect the lingual flap past the genial tubercles because:
this could release the buccinator muscle
this could cause the floor of the mouth to retract with an airway problem
this could detach the genioglossus muscle
B and C
B and C
When reflecting towards the lingual during implant surgery on a patient who has been wearing a lower bilateral RPD for 25 years, which muscle could be encountered:
lateral pterygoid muscle
masseter muscle
temporalis muscle
mylohyoid muscle
mylohyoid muscle
When making an incision in the retromolar pad area ( 2nd-3 rd molar area ) the clinician needs to stay towards the buccal (towards the external oblique ridge) to avoid which structure:
inferior alveolar nerve
mental nerve
infraorbital nerve
lingual nerve
lingual nerve
During implant surgery the clinician perforated the lingual plate of the posterior mandible and the floor of the mouth suddenly swells. Which most critical structure did this clinician injure?
inferior alveolar nerve
external maxillary artery
lingual artery
carotid artery
lingual artery
During maxillary posterior implant surgery the clinician makes an incision just off the crest of the ridge and perfuse bleeding occurs. Which is the most likely structure supplying this bleeding?
nasopalatine artery
external maxillary artery
greater palatine artery
infraorbital artery
greater palatine artery
During insertion of the abutment during the uncovery of an dental implant at stage II the clinician usually stabilizes the abutment while torquing the implant because of concern of:
rotating the implant with 30n-cm of torque since the implant was not loaded yet
to prevent the patient from swallowing the abutment
to position the abutment in the proper alignment
all of the above
all of the above
During implant surgery the purpose of bone tacks is for:
creating bleeding points in the bone
holding the implant in place
stabilizing a barrier membrane in place usually over a graft material
stabilizing a block graft
hanging up your mini-residency certificate
stabilizing a barrier membrane in place usually over a graft material
An indication for bone screws would be which of the following?
fixation of an autogenous block graft
fixation of an autogenous allograft
fixation of a titanium mesh
all of the above
all of the above
A written Informed consent is usually obtained from the patient for which of the following procedures?
implant surgery
bone grafting procedures
implant prosthetics
all of the above
all of the above
An osteogenic material is:
Puros ® allograft
Autogenous bone
Recombinant BMP-2
HA alloplast
All of the above
Autogenous bone
The benefits of utilizing a wide body implant is:
Better load bearing capabilities
better implant to bone surface area
better contours for molars
all of the above
all of the above
Which of the following anesthetics would last longest during a full arch implant surgery?
3% mepivicaine
2% lidocaine without epinephrine
0.5% bupivicaine with 1:200,000 epinephrine
2%lidocaine with 1:100,000 epinephrine
4% Articaine
0.5% bupivicaine with 1:200,000 epinephrine
A patient comes to the office one week after implant surgery in pain and with swelling. You inquire further and the patient states that the swelling has increased over the past 2-3 days and they are still taking the Amoxicillin 500mg TID you originally prescribed. Which of the following might apply to changing antibiotics?
Discontinue the Amoxicillin and have the patient take Augmentin 875mg BID
Prescribe Flagyl ® (metronidazole) i250mg TID and continue the amoxicillin being taken
Stop the Amoxicillin and switch to Clindamycin 300mg TID
All of the above
All of the above