1/70
Looks like no tags are added yet.
What is the generation time for yeast
90-120 mintues
what is the preferred temp of growth for yeast
30-32C
how do yeast divide by
budding
what is the rich media for yeast
YEPD
screen vs selecton
screen - itentify mutations among all survivors of the mutagen (ex. observation of colony color)
selection - identification mutations under conditions where only mutants survive (ex. drug resistance)
What are mating types in yeast
MATa or MATalpha that are carried by the haploid strain of yeast. They can fuse to form diploids
What is heterothallic?
haploid cells maintain a steady, permanent mating type. so they cant mate with themselves since they need opposite mating type to mate.
what was done in exp 2
generation of lys 2 mutants in yeast (S. cerevisiae)
How was experiment 2 conducted (3) like what steps were done
- yeast were put under UV light
- selection for lys2 and lys 5 mutants on adipate selective media
- 12 mutants were streaked to generate at least 4 well-isolated clones of each mutant
what is mutagenesis
using mutations to study genes
why was UV rays used
increases the rate of spontaneous mutations
What does the UV rays do to the DNA
induces a photochemical change in DNA resulting in formation of abnormal chemical bonds and usually creates thymine dimers
what happens if a pyrimidine dimer is formed
lethal to the cell
What is the parent strain name
BJ2664
How does yeast repair DNA damage + what is it
excision repair: endonuclease cuts dimer and removes mutation and then DNA pol fills gap
prototroph vs auxotroph
prototroph - able to make all the components to grow
auxotroph - unable to make components necessary for growth
what is the parent genotype and phenotype
Genotype: MATalpha, LYS+, trp1-, ura-
Phenotype: Lys+, trp-,ura-
What is the desired mutant's genotype and phenotype
Genotype: Matalpha, lys-,trp-,ura-
Phenotype: lys-,trp-,ura-
what was the goal of exp 4 and 6 (2)
determine the lys and trp phenotypes of putative mutant clones. also determine genotype with respect to lys 2 and lys 5
what are the major steps of exp4 and 6 (4)
1. make a master plate (YEPD)
2. replica plate onto different plates to determine phenotype
3. create master plate of 4 candidate clones
4. mate candidates with known strains to determine genotype
in exp 4/6 when making replica plating what are the components of the following plates:
1. complete
2. com-lys
3. com-ura
4. com-trp
5. adipate selective
6. MV + adipate
1. all amino acids
2. all AA except lysine
3. all AA except ura
4. all AA except trp
5. has lysine, no nitrogen
6. all AA except lysine, has nitrogen
what were the purpose of the plates:
1. complete
2. com-lys
3. com-ura
4. com-trp
5. adipate selective
6. MV + adipate
1. control for growth
2. if mutants have lys mutation
3. if mutants are ura-
4. if mutants are trp-
5. if mutants are specifically lys2 or lys5
6. narrow down which specific enzyme step in the lysine pathway was mutated.
can parent/lys2 mutant grow on plate:
complete
both yes
can parent/lys2 mutant grow on plate:
com-lys
parent - yes
mutant - no
can parent/lys2 mutant grow on plate:
com-ura
both no
can parent/lys2 mutant grow on plate:
com-trp
both no
can parent/lys2 mutant grow on plate:
adipate selective
parent - no
mutant - yes
explain the outcome of the adipate selective plates
lys2 and lys5 can use a-aminoadipate on plate to provide nitrogen needed
can parent/lys2 mutant grow on plate:
MV + adipate
parent - yes
mutant - no
What would it mean if a mutant was able to grow on the MV + adipate plate and explain why
mutation occured before lys2/5 in pathway.
These mutations are able to utilize the ketoadipate provided on the plate and convert it to lysine to grow. The lys2/5 mutants cant use ketoadipate to convert to lysine to grow
for exp4/6 when making the new master plate with the 4 candidate clones how is this done
pick colonies from the original YEPD master plate
when mating how does mating type come into play
mating type needs to be opposite
What was the goal of exp 9?
determine the lys and trp phenotypes of putative mutant clones. determine the genotype with respect to lys2 and lys 5
what was the steps of exp 9 (1)
1.. transform lys2 mutant with a long and short pJSx deletion plasmid
how is complementation used to determine the location of the mutation
after transformation with long/short plasmid --> see if mutation can grow on com-lys plate.
if yes --> can show that complementation occured and that the mutation on mutant is in a location somewhere on the deletion plasmid
what is transformation
process by which forein dna is introduced into host organism
in exp 9 what is host orgnaism and what is foreign dna
host - yeast (S. ceravise)
foreign dna - plasmid
4 steps in transformation
1. competency - make sure yeast can uptake foreign dna
2. dna uptake - process of uptaking foreign dna
3. recovery - recover cells, repair memrane and express genes
4. selection - identify the cells with the foreign plasmid dna
which transformation method is used in exp9
lithium acetate
how is competency achieved
Li + ons weaken and permeabilize the rigid yeast cell wall and plasma membrane by altering cell surface charge and osmotic balance, allowing foreign plasmid DNA to pass throug
what kind of yeast is needed for transformation
log phase
what does PEG TE/LiAc do
PEG - brings plasmid DNA directly to yeast's cell wall
TE - used as a buffer
LiAc- Li+ makes cell wall less rigid
what is carrier dna
salmon sperm DNA to distract nuclease so that the plasmid DNA isnt destroyed by nuclease instead
why is DMSO added to transformation
helps facilitates uptake of DNA
why is heat shock used in transformation
to help allow DNA to pass through membrane
how many transformants are created per ng of DNA
10^5-10^6
what are the two main methods o bacterial transformation
1. calcium chloride
2. electroporation
What is reversion
mutants that turn back to WT
UV light mutations are usually what
point mutations
what kind of reversion freq tests were done and why
trp1 at one temp
lys2 at multiple temp(3)
lys2 is more suseptable to temperature sensitive mutations
how is reversion frequency calculated
#colonies/total cells plated
what does the reversion freq mean
number of revertants in total cells
what is the purpose of a deletion mapping/marker rescue
narrow down location of a mutation. full lys2 is super long so its not efficient to send all of it for sequencing —> narrow down a specific location to send for sequencing
What is the genotype and phenotype of the host yeast
Matalpha trp1 lys 2 —> trp-, lys-
what do the cells need to be for them to be transformed and why
log phase so that they can take up plasmid and replicate its genome and the plasmid
what does LiAc do
compromise the charge of membranewha
what is carrier DNA
salmon sperm that is used to distract the nucleases
what about the plasmid can lower the efficiency of the transformation
if the plasmid was diluted to much —> can lower the transformation efficiency
what does the pDP12 contain in terms of trp and lys gene
has full trp1 gene
has full lys gene
transformation with pDP12 will result in what in the following plates:
- com-trp
- com-lys
growth on both
What causes the result of com-trp and com-lys after transforming with pDP12
complementation causing the mutant to pick up full copy of both lys and trp
What does growth on com-trp and com-lys for no plasmid DNA mean
there are revertants
what do the deletion plasmids contain in terms of trp and lys
has trp1 full length
part of lys is missing
for deletion plasmid transfomation what should the com-trp plates mean and why
growth on com-trp due to complementation —> shows that transformation of plasmid worked
what should com-lys plates look like for deletion plasmid transformations and why
growth or no growth
growth could indicate either recombination or reversion
what does growth on com-trp and com-lys plates for no plasmid DNA transformations mean
reversions
what is marker rescue
restoration of gene function by replacing defective gene with a normal one
what causes marker rescue
recombination
what has to be true if recombination occurs in the cells
region of the lys2 on the plasmid must overlap with the regio of the mutation in the mutated gene
How does the MV+ adipate plate work and what is on the plate
to check if mutation is before the lys2/5 mutation
plate doesnt have lysine but has a-ketoadipate
if the mutant is 4, 7, or 12 then there will be growth on the plate because it can use the a-ketoadipate to continue growing the pathway and make lysine
why is there growth on adipate plates for lys2/5 and what is on the plates/what is not
there is lysine and a lot of a-aminoadipate no nitrogen. lys2/5 can use a-aminoadipate to make glucagen which is a nitrogen source. so lys2/5 can grow