1/14
Looks like no tags are added yet.
Why do we use a focimeter?
To check the prescriptions of glasses
How are the two types if focimeter different?
One with a wheel, the other without
How do we focus the eyepiece?
Turn focimeter all the way anti clockwise until it stops
Then turn clockwise until graticule comes into focus then stop
How do you calibrate focimeter?
turn the power dial on the side down until the target is completely clear (circle of dots completely clear)
Power reading should be zero
If it’s not zero, you need to take this into account when measuring the prescription
How do you get the optical centre?
clamp the glasses into place
Move the green dots so they are in centre
Mark the optical centre
How do you position the lenses ?
flat on the table
And clamp
How do we find the lens prescription?
target at optical centre
Move power dial on focimeter until it’s completely in focus
Then read prescription on the scale in the focimeter
How do we find toric prescriptions?
will see stretched dots into two sets of line that are 99 degrees to eachother
If using focimeter with wheel, you will need to turn it as you turn the power wheel
Until the line on the outside meets with the line created by the centre if dots
If using focimeter with wheel, you want to use the shorter if the two sets of ‘Ines , might need to turn by 90 degrees
Find the most positive power first
Turn 90 degrees
Find the most negative → difference between the 2 is the cyl
Axis is read from position 2
Turn the collar until the black line is parallel to the second axis line until is stretch onto the protractor
Why do we mark blanks?
sphere and cylinder powers have been set
Axis direction and optical centres can be moved
Lens needs to be fitted to the patients prescription
Need to match the OC with the px PD or create a prism
Describe the steps in marking blanks
confirm sphere and cylinder powers with focimeter
Focus on more neg
Twist lens so it’s more focused on the axis that’s given in the prescription , set axis at required angle
Ensure target , dots, are at centre of view
Use marking device to mark three dots on lens
Middle dot it OC
three dots are meridian
Use three dots to help mark axis
And mark right or left on temporal side
How do we decentre the lens?
use graph paper
Draw cross
OC on centre of cross
Move by direction required
OC not at box centre
Now draw vertical line one third high and horizontal to nasal

What happens if image falls out of view in focimeter?
Use a prismatic lens from trial frame to bring image back into view
Don’t do this when measuring the prism
If there is prism present will the circle of dots be in the centre? What is the displacement if the fits equal to?
No the displacement if the circle of dots is equal to the value if the prism

How can we measure the displacement of dots ?
Using a graticule
If the circle is circling the second circle up, for example , the base direction is 2 prism Dioptres base up
Horizontally, if towards nasal it is base in, and towards temporal it is base out
What are some focimeter tips?
