1/19
A set of 20 practice questions and answers reviewing beams, loadings, force systems, couples, free body diagrams, Varignon's theorem, trusses, moments of inertia, friction, and particle dynamics.
What defines a cantilever beam?
A cantilever beam is a beam that is fixed at one end and free at the other end.
How many total reaction components exist for a beam with both ends hinged?
There are 4 total reaction components, with 2 reaction components acting at each hinged end.
How is a uniformly distributed load (UDL) represented when analyzing the equilibrium of a beam?
It is imagined as a single concentrated total load calculated by (intensity×length) acting at the middle of that length.
For a triangular uniformly varying load (UVL) extending 3m from zero intensity at one end to 20kN/m at the other, what is the equivalent total concentrated load?
The total load is 21×3m×20kN/m=30kN, with its center of gravity located 1m from the maximum intensity end.
What are colinear forces?
Colinear forces are forces whose lines of action lie on the same straight line.
How are concurrent forces defined?
Concurrent forces are forces whose lines of action meet at one common point.
What is a couple, and what is the algebraic sum of its forces?
A couple consists of two parallel forces that are equal in magnitude and opposite in direction separated by a specific distance; the algebraic sum of all forces forming a couple is 0.
If a perpendicular force of 435N is applied to the edge of a door 0.8m wide, what is the moment produced?
The moment is calculated as Moment=Force×perpendicular distance=435N×0.8m=348N⋅m.
What is a Free Body Diagram (FBD)?
A diagram in which the body under consideration is isolated and freed from all contact surfaces and shown with all forces acting on it, including applied forces, self-weight, and reactions from contact surfaces.
What does Varignon's Theorem state?
The algebraic sum of the moments of a system of coplanar forces about any moment centre is equal to the moment of their resultant force about the same moment centre.
What are the four primary characteristics used to represent a force?
What is the formula used to determine if a truss is stable or perfect?
The formula is m=2×J−R, where m is the number of members, J is the number of joints, and R is the number of reactions.
What are the three fundamental assumptions made in the analysis of a truss?
What are the four methods of analysis for a truss?
What does the theorem of perpendicular axes state for a plane section?
If Ixx and Iyy are moments of inertia of a plane section about two perpendicular axes meeting at point O, the moment of inertia Izz about the axis perpendicular to the plane passing through O is Izz=Ixx+Iyy.
State the parallel axis theorem formula and identify its variables.
The formula is IAB=IG+a×h2, where IAB is the moment of inertia about axis AB, IG is the moment of inertia about the centroidal axis, a is the area of the section, and h is the distance between the center of gravity and axis AB.
What are the centroidal moments of inertia Ixx and Iyy for a rectangular section of width b and depth h?
For a rectangular section, Ixx=12b×h3 and Iyy=12h×b3.
How is the coefficient of friction (μ) defined and expressed mathematically?
It is the ratio of limiting friction to the normal reaction between two bodies, given by the formula μ=NF.
What is the angle of repose?
The maximum inclination of a plane on which a body free from external forces can repose without slipping, or the inclination angle at which the block just begins to slide down the plane and motion is impending.
Within dynamics, what is the difference between kinetics and kinematics?
Kinetics deals with the motion of bodies with reference to the forces causing the motion, whereas kinematics deals with the motion of bodies without reference to the forces.