1/15
Looks like no tags are added yet.

Folly
A small, single-purpose pavilion built primarily for spatial experience rather than utility.

Aperture
An intentional opening in a plane that admits light, frames views, and connects spaces. In this project: the top circular viewing hole and angled cuts letting light spill onto the seating levels.

Threshold
A transitional zone signaling the shift from an exposed exterior to an enclosed interior. In this project: the narrow entry cut where a person steps from outside into the curved metal shell.
Compression and Release
Moving from a tight, low space into a tall, open volume to heighten spatial contrast. In this project: entering through a low duct opening before looking up into the open vertical cylinder.
Enclosure
The degree to which overhead and vertical planes surround a space to create shelter. In this project: how the curved metal walls and upper roof wrap around the seating zone without sealing it shut.
Circulation
The path of movement through a space, including how people approach, pass through, and pause. In this project: how visitors step into the duct tee, navigate the angled cuts, and settle onto the seating.
Tectonic
The expressive quality of how physical materials are cut, joined, and assembled. In this project: celebrating the raw galvanized sheet metal seams and simple notched joints.
Subtractive Form
Removing portions of a solid volume while keeping its original geometric identity recognizable. In this project: slicing the duct tee in half while keeping its unmistakable cylindrical T-profile.
To Shear
Shifting or slicing two parts of a form past each other along a flat plane. In this project: making an angled diagonal slice across the duct tee to expose the interior seating levels.
To Puncture
Piercing a clean hole directly through a surface without breaking its overall edges. In this project: cutting the top viewing hole to frame a direct view out to the sky.
To Notch / Interlock
Cutting a slot into one piece so another element slides in and locks structurally. In this project: slotting the interior seating platforms directly into cuts in the galvanized duct wall.
Poché
Solid black or hatched fill showing every material mass sliced directly by a cut plane. In this project: solid black fill in Illustrator wherever the 4'-0" plan or vertical section slices the duct wall.
Plan Cut (at 4'-0")
A horizontal slice 4 feet above ground looking down, with overhead elements dashed. In this project: the 11"x17" plan showing seating below and dashed lines for the duct canopy above.
Transverse vs. Longitudinal Section
A vertical slice cutting across the short width (transverse) or full length (longitudinal). In this project: cutting through the stepped seating to show interior height and spatial depth.
Axonometric (45° Aerial)
A measurable 3D paraline view rotated at 45° with no perspective distortion. In this project: the 45° aerial collage overlaying the duct with and without its roof at reduced opacity.
Atmosphere & Scale Figure
Using light, shadow, texture, and human figures to communicate mood and real size. In this project: placing white 3D-printed or lit Photoshop figures in the interior view to show the 8'-12' height.