1/47
Vocabulary practice flashcards covering forensic ballistics, firearm mechanisms, ammunition characteristics, gunshot residue analysis, rifling marks, and forensic comparison databases.
Forensic ballistics
The analysis of firearms, ammunition, fired bullets, cartridge cases, and associated evidence to assist criminal investigations; also known as forensic firearm examination.
Shotgun
A shoulder-fired firearm commonly designed to discharge shotshell ammunition containing multiple pellets or a single slug, typically featuring a smoothbore barrel.
Rifle
A long firearm characterised by spiral lands and grooves inside the barrel (rifling) that impart spin to a single projectile to improve stability.
Handgun
A compact firearm designed to be held and operated with one or both hands, with common examples including semi-automatic pistols and revolvers.
Semi-automatic pistol
A handgun that typically stores ammunition in a magazine and automatically cycles its action after firing.
Revolver
A handgun equipped with a rotating cylinder containing multiple chambers for cartridges.
Frame (Receiver)
The main supporting structure of a firearm that connects components, provides structural stability, and houses or supports parts of the firing mechanism.
Barrel
The metal tube through which a projectile travels when a firearm is discharged, responsible for directing the projectile and containing internal pressure.
Bore
The internal surface of a firearm's barrel.
Action
The mechanical system responsible for loading, firing and, where applicable, extracting and ejecting ammunition.
Stock
The component of a firearm that supports it against the shooter's shoulder.
Trigger
The component that initiates the firearm's firing mechanism.
Safety
A mechanism that helps prevent unintended firing of a firearm when engaged.
Firing pin
The component of the firing mechanism that strikes the primer to initiate ignition.
Chamber
The compartment of a firearm that holds the cartridge during firing.
Breech face
The internal surface of the firearm that supports the base of the cartridge during firing.
Extractor
The mechanism that removes or helps withdraw a cartridge case from the chamber.
Ejector
The component that contacts and helps expel the cartridge case from the firearm.
Calibre
The nominal diameter of a firearm's bore or projectile, commonly expressed in millimetres (mm) or inches.
Gauge
A traditional measurement for shotgun bore diameter based on the number of spherical lead balls of that bore diameter that together weigh one pound.
Cartridge
A complete unit of ammunition containing the bullet, cartridge case, propellant, and primer required for firing.
Shotshell
A type of cartridge commonly used in shotguns, typically consisting of a case/hull, primer, propellant, wad, and shot pellets or a slug.
Bullet
The projectile located at the front of a cartridge that leaves the barrel and travels towards the target.
Cartridge case
The container surrounding ammunition components that holds them together and remains after the bullet is discharged.
Propellant
The chemical material inside a cartridge case that produces expanding gases when ignited to propel the bullet.
Primer
The impact-sensitive ignition component struck by the firing pin to initiate propellant ignition.
Rimfire ammunition
Ammunition in which the primer compound is located within the rim of the cartridge case.
Centre-fire ammunition
Ammunition in which a separate primer is positioned in the centre of the cartridge base.
Wad
A component in a shotgun shell that separates the propellant from the shot and may help seal gases.
Gunshot residue (GSR)
Microscopic particles and chemical residues produced during firearm discharge, originating from the primer, propellant, bullet, cartridge case, and firearm components.
Barium (Ba)
An element (atomic number 56) associated with conventional primer residues in gunshot residue analysis.
Lead (Pb)
An element (atomic number 82) associated with primers and some projectiles in gunshot residue analysis.
Antimony (Sb)
An element (atomic number 51) associated with conventional primer residues in gunshot residue analysis.
SEM-EDS
Scanning electron microscopy with energy-dispersive X-ray spectroscopy; an analytical method combining particle morphology (SEM) with elemental composition (EDS) to examine GSR.
Rifling
The spiral pattern of raised and recessed surfaces inside a firearm barrel designed to impart spin to a projectile for flight stability.
Lands
The raised portions of a rifled bore that project inward relative to grooves and produce land impressions on the bullet.
Grooves
The recessed channels cut between lands in a rifled bore that leave corresponding groove impressions on the bullet.
Class characteristics of rifling
Rifling features shared by firearms manufactured with the same specifications, including the number and width of lands and grooves, direction of twist, and general rifling design.
Individual characteristics of rifling
Microscopic irregularities on the barrel surface caused by manufacturing imperfections, wear, corrosion, or damage that transfer unique striated marks to bullets.
Striations
Fine, often parallel scratch-like markings transferred to a bullet as it passes through a rifled barrel.
Breech face marks
Impressions left on the cartridge head and primer when firing pressure forces the cartridge case backwards against the breech face.
Chamber marks
Markings formed on the body of a cartridge case through contact with the chamber walls during loading, firing, or extraction.
Extractor marks
Markings located near the rim or extraction groove of a cartridge case produced when the extractor engages and withdraws the case.
Ejector marks
Markings commonly found on the cartridge head or rim produced when the ejector contacts the case to expel it.
Integrated Ballistics Identification System (IBIS)
An automated system used to store and compare digital images and surface information from fired bullets and cartridge cases to generate investigative leads.
Soot
Fine carbonaceous material produced during firing that may deposit on a target at close or contact range.
Stippling (Tattooing)
Small punctate skin injuries caused by unburned or partially burned propellant particles impacting the target surface.
Abrasion ring
A rim of abraded skin that may occur around a projectile entrance wound.